Changing Blades On Power Dewalt Hand Planer D26676 Or Similar Dewalt Hand Planer

[@michaelthoman5203]

Finally I found a video using the Blade Gauge!! Thx

[@davidrobert1855]

Thank you showing how to use blade gauge your the first showing how it is done

[@kylestampfli9130]

I couldn't find anything either!!!!! I searched and searched! Thank you for the video!

[@MikeMcCorkle]

hard to find. Thanks for doing this.

[@tylerhuesman3749]

This is the same exact process for the newer cordless planers with the thinner carbide blades. Only difference is those are reversible so I don’t believe you get a sharpening jig but I might be wrong. Great vid! Thanks so much!

[@aspe12]

Great video. Thanks for the detailed instructions for using the gauge. I just could not have figured it out from the manufacturer instructions.

[@ligngood3787]

You're right! Dewalt's instructions for this SUCK!!

[@ryanguest738]

Thanks, it is also applicable to the battery operated version (DCP580N). This is really useful as the manual is very low on detail 🙏🥇

[@mikemichaels1875]

Thanks for the instructions. Saved me some head scratching and a couple of hours.

[@patricklastname5646]

so glad I found you video. The instructions that come with the tool may as well be written in chinese and not be any more confusing.

[@brnzhut]

all dewalt instruction manuals are as worst as it could be composed, diagram page is far away from the instruction page, and all written in confusing grammar

[@brucemorris6319]

Thanks this helped me a lot.

[@KedaWoodDye]

@@brucemorris6319 Happy I could help out. :) Thank you!

[@RonMack07]

I’m going to grab one of those Dewalt planers at times I don’t want to hand plane everything, I have all the sharpening stones I need to keep the blades sharp, thanks.

[@MrTheBurkes]

Any chance you could use a combo square or tape to measure the depth that depth guage sets thr blades to? Lost mine immediately after opening the box and need to set my new blades 😬

[@asherhogue6333]

I have the cordless and love it. The instructions are pretty clear. No reason to take the plate off. Also, my knives are carbide which are reversible. Only takes a few minutes to change out. Ditch the tool..use a driver.

[@BluebarnHomestead]

thank you my friend, saved my marriage as my wife was already mad on how much time i took to shave these cabinets down

[@zafraf4071]

Hi just invested in new dewalt brushless planer ... blade blew off on first pass on some softwood ! crazy ... must have been a fault with tool Waiting replacement but would be useful if I could find a video on changing blades as the instructions in the manual are rubbish

[@TheJugee]

Thanks man!

[@michaelthoman5203]

But 1 comment. Please zoom in on the Blade Gauge like you did installing the blade assembly, with better lighting.

[@DustinMercer]

excellent. although the factory installed blades are near-impossible to loosen :(

[@kevinzlof]

yeah, the factory tool is useless against the super tight bolts. Have to use a wrench.

[@aam50]

That was really useful - thanks

[@MrKfq269]

My blades are dull already. I purchased my dewalt this morning. Used it for about an hour. Can I use a hand held belt sander to sharpen the blades? What grit?

[@gedpowell8831]

Good video - much appreciated!!

[@WadesWorldVideo]

Great helpful video.

[@declanmcguiness]

Great video thanks 👍🏻

[@rasputian2010]

You need to nip the side the blades off so the planes doesn't gouge your work peace if tilted. The blades are wider than the guide.

[@michaelcarton3299]

Are you really supposed to cut them? I noticed the carbide inserts are longer then the drum

[@rasputian2010]

@@michaelcarton3299 that's what the pros do.

[@michaelcarton3299]

I wish the manual would mention that

[@paulahillbaughman6865]

The video is dark and I can't see the way stuff is put together. Was given the planner and these pieces were missing. Had to buy them now I have no clue how to put it all back together. 😭😭😭😭HELP!!!

[@carlossanchez-rf6ue]

thank you i like it----gracias me gusto

[@jamiejohnson706]

THANKS BUDDY

[@Terry3Gs]

great video !! :)

[@shadowxvi1282]

Impact wrench makes it ez to take the 3 screws out

[@elusivemite]

Wtf. Why are you taking the shoe off to change the blades. You need the shoe to reference the blade height.

[@garryaldred2216]

Thank you

[@needaman66]

ive never taken the plate off, do you know what your doing? i just want a guage

[@joyr1070]

Thanks, great tutorial. I love this tool...but the instructions are not the best. And I get what Mrkfq269 is talking about...the blades that come with it dull super fast...even on simple soft wood jobs.

[@tiasulkr5962]

My dad says thankyou

Jeez! This is like watching paint dry!

[@pomonabill220]

it's not a housing.. it's the drum. You kept confusing me when you called it a housing. Also, you need more closeup views.

[@richard2702]

Why would you use a drill to tighten not required very clumsy

[@andrewarthurmatthews6685]

Poor video as the camera is too far away from the planer .

[@needaman66]

While this video could have been helpful, i cant see what this tab and this tab differemces are. Perhaps some close ups ao we can see properly. Disappointed. Try again

[@DJSuddenAttack]

Thanks for this My blades need to be Sharpened or Changed out and this Vid will guide me in doing so.

[@mauricemcloughlin8261]

Thanks buddy