Changing Fuel Injectors on a Mercedes Sprinter 906 + Topdon ArtiDiag 800BT Review

[@kawasakiman8965]

I was hoping you were going to show how to re programming them

[@RolandHoltz]

Great video, very nice you included the problems into it, which but of course always occure. Well done, I learned a lot from it, even though I have a BMW 6 cly (M57). So thanks. Roland from good old Germany.

[@DaveGreeneramblingcarpenter]

Hey Raul, just came here from your truck channel,, good luck with your new venture,, im a carpenter travelling around the UK, trying to make my citreon relay into a campervan as I travel and picking up work along the way,

[@Raul689]

Thanks pal and hlgood luck with your van 👍

[@kennethjones1441]

Well done Raul !!!. Thanks for a very interesting and eductional vid.

[@Raul689]

Glad you enjoyed it

[@topmonkey6512]

800BT basic operation video, update and so on: kzbin.info/www/bejne/aZ3ckIuogN2sh6M, I hope you can take a look.

[@michaelstaunton1632]

A most interesting video index really good well done 👍👍

[@TheSuperduke516]

Big smiles, good vid 👋

[@scoobywrximpreza5948]

Hi could you do a video of the reprogramming process thanks so much

[@danielking3629]

Hi mate, great work! I’m just doing one injector. Was wondering, when you reinstalled, did you need to bleed the fuel line? If so how is that done? Just leave loose and turn ignition till fuel comes out?? Thx

[@Raul689]

Yes I had to bleed them. Just leave ignition on till fuel comes out. do them one at a time

[@MrTsonkov]

Hi Raul, very clear video. I only want to ask you what number is the injector to the radiator? thanks

[@Raul689]

Near the radiator is number 4. The numbering starts from the timing chain, which is in the back of the engine. Hope it helps 👍

[@MrTsonkov]

Thank you

[@D4R31111]

Is number 1 on my om651 near the radiator

[@marianmaghila1801]

Am un Volvo 1.6 diesel vreau sa vad care injectoare are problema motorul trepidează la rece și da in nas se poate cu acest tester

[@Israelespinas6922]

Bonjour monsieur pouvez vous toujours accede a la fonction injector ?car depuis une mise a jour sa ne fonctionne plus merci

[@TheWhisky81]

Can this read ecu milage, thanks john.

[@jamesmichael8549]

Do you have to pay every year in order for this OBD reader to work ? If you dont pay does that still work ? Do you need to have internet to used it ? If you don't updates does that still work without updates ? Out from the box can you used it without wifi or internet ? Can this scan for Fuel Pressure ? And can this scan for compression test ? Is this a Complete diagnostic Scan tools ?does it Scan from 1996 cars going up ? How about Toyota Camry 2001 2.2 Liter 4 Cyl or Buick Park Ave 2003 3.8 Liter does it Scan these cars ? Does this scan for battery ignition parameters ? Does it Scan for a bad head gaskets ? Is this the latest version 2024 ?

[@elviejon84ful]

Free update software for life

[@Raul689]

Don't have to pay for anything. Free lifetime updates for this

[@mariovasquez7235]

I know your sprinter is diesel, my Mercedes 2010 E50 it’s a gas do you think the scanner can re-program and get of limp mode?

[@Raul689]

can't do reprograming

[@mariovasquez7235]

Thank you

[@MrTsonkov]

Hi Raul , Which year is your van? I bought Same Topdon tool, but not showing codes on my injectors.Maybe I'm doing something wrong.do you have idea why? Thank you

[@Raul689]

Hi Alex. Mine is a 2011. Look for topdon support group on FB, they are very responsive and surely they will help you out

[@MrTsonkov]

@@Raul689 Thank you

[@brandonwilliams321]

When did u do the coding

[@Toby_the_Glen]

Do they still continue with the free updates when they update the hardware to a newer model e.g. 801?

[@Raul689]

I don't know that, but this model has free lifetime updates

[@topmonkey6512]

Yes, permanent free updates，800BT basic operation video, update and so on: kzbin.info/www/bejne/aZ3ckIuogN2sh6M, I hope you can take a look.

[@mariussandu5459]

Did you disconnect the battery or no?

[@Raul689]

No

[@yacubrana5280]

Veri Veri nice

[@cransaftvalve734]

What power is your engine and what ECU, bosch, Delphi?.

[@Raul689]

95KW Delphi ECU

[@cransaftvalve734]

@@Raul689 thanks.

[@myjizzureye]

Firstly cylinder number 1 is the front of the car on Mercs. You would of found that out if you took the injectors out in order and compared the stored codes. Secondly you need to zero quantity calibrate the engine after changing.

[@haraldsjonans3724]

Hello, my car s212 Mercedes om651 can make change injectors it?

[@Raul689]

Check topdon website, but i guess you can

[@AlexYeets]

What camera do you use in your videos?

[@Raul689]

i use a Lumix S5

[@MrTsonkov]

this tool can't read the injectors on my sprinter, therefore, it cannot code them. Also, the second cylinder is second on the radiator side. I made the mistake of listening to you and changed a good injector......

[@Raul689]

What sprinter model do you have?

[@BenMaldan]

Most of the engines first injector is the one where the timing is. You should look for some info Mercedes repair procedures before carrying works like this

[@Raul689]

@@BenMaldan that is correct

[@kennethjones1441]

NB Here is the missing ( A )

[@Spacer-l3j]

Buy new injectors guys avoid the hassle