I am changing the steering gear box on my Freightliner Coronado.
Пікірлер: 40
@RideTheLite3 ай бұрын
Great video man. If people are hating because you didn’t show them how to do it, they probably shouldn’t be changing the part anyways. You explained the process and that’s all that’s really needed. Those pitman arms can be seized sometimes though. Otherwise, it’s a relatively easy job.
@stanherbert37723 жыл бұрын
I see some folks don’t like what you did however I appreciate you showing me how to do it I have a T800 Kenworth 07 and I am not mechanically inclined however you made it easy thank you for showing me how I appreciate you and stay safe on the road you gave me enough encouragement that I can do it myself thanks again. 👍🏾👍🏾👍🏾
@natcoziay2 жыл бұрын
Thank you driver.
@1HSYURIDIA2 жыл бұрын
Ok What was the issue? Why you replaced it?
@azizomer30923 жыл бұрын
Thanks for taking the time to make this video. Its very helpful. Don't mind what some people have to say because some people don't have common sense. Keep them videos coming.
@natcoziay2 жыл бұрын
Thank you....you're right.
@ChickenDaddi2 ай бұрын
Thank you bro
@natcoziay2 ай бұрын
@@ChickenDaddi You're welcome
@booyakashaboy72503 ай бұрын
Is an alignment necessary after doing this gearbox replacement? Thanks! 👍
@natcoziay3 ай бұрын
@@booyakashaboy7250 I didn't get one, but ask a professional to be sure.
@shirleygomez21574 жыл бұрын
that was a waste of time! you didn't show the process.
@natcoziay3 жыл бұрын
Don't watch then...problem solved!
@dejandragovic1843 жыл бұрын
Nothing to see here video is bs
@dondon51313 жыл бұрын
Bro Great , My Volvo I have just got this problem as I was heavily loaded. Turned to fuel up @ Rockisland, wa my steeling gear box is out and no mechanics in this place. Hopefully this video is gonna help me as iam still looking for the part.
@chadha1412 Жыл бұрын
What size socket does it take for the big nuts?
@Boyleheights213por-vida2 жыл бұрын
THANK YOU BROTHER APPRECIATE YOUR VIDEO.
@natcoziay2 жыл бұрын
You got it
@jackturner49216 ай бұрын
Do you a have to jack up the truck to change it out
@natcoziay6 ай бұрын
Don't know if you HAVE to, but I did jack it up
@yasinhamimed4725 Жыл бұрын
what oil did you use
@vitalikkc Жыл бұрын
By the chance do you have the part numbers on that steering gear box?
@natcoziay Жыл бұрын
I do not, but if you have a used one on your truck the part number is on it. It is usually covered up by road grime and you will have to clean it off to see the numbers. The numbers are recessed and stamped on so you will need to wipe it pretty good to see the numbers. You may not think the numbers are there but they are. You have to look very close
@ironbull15593 жыл бұрын
did you have a lot of play in steering wheel? is that the reason why you changed gear
@natcoziay3 жыл бұрын
No...it was leaking oil that's why I changed it.
@adrianfoca8653 жыл бұрын
Why did u change it?
@anatoliyhuhalo16003 жыл бұрын
What kind of cascadia is it I want to put the air ride up front if u can help me out
@natcoziay3 жыл бұрын
It's a Coronado. But if you want the air ride, I can tell you that I don't like the air ride. I think springs handle better. Air ride is cool but it does not handle well in my opinion on a semi truck. If you can keep your springs and add the air ride for support, I would suggest that. Check out a company called Donvel for the air ride. Their website is donvel.com
@TruckDriver_20162 жыл бұрын
Nice 🎉
@josephg479Ай бұрын
This video should be titled “listen to me complain about finding and replacing steering box” This video is shit my brother 😂😂.
@dell705410 ай бұрын
how did u bleed it
@g5nation8282 жыл бұрын
You didn't even show how to change it. How to bleeding system, etc. 🤷🏿♂️
@natcoziay2 жыл бұрын
If you were there to hold the camera while I changed it then we could have filmed it. Otherwise, be appreciative of what you did get to see. Or go to a mechanic and have them rip you off for such a simple job. #neversatisfied!!
@mossless_ston33 жыл бұрын
This video was a waste of time. You didn't show the tools/sizes of sockets or wrenches. No torque specs, nothing. This video skipped all the important parts of the process, actually changing the gearbox. (As your title falsely describes). If I could unwatch this, I would.
@natcoziay3 жыл бұрын
Next time don't watch!! Problem solved!
@mossless_ston33 жыл бұрын
@@natcoziay lol you're funny...Just accept the fact that your video sucked. And don't worry, there won't be a "next time". Immediate skip and thumbs down anytime your videos come across my feed...Take it easy champ
@natcoziay3 жыл бұрын
@@mossless_ston3 I'll live
@adrianfoca8653 жыл бұрын
You want him to come do your job as well?
@TheJuan_N_0nly2 жыл бұрын
You sound so fucking soft.. Emotionally compromised and soft.. If you're a man you got some self evaluating to do..