vibration on frieghtliner cheap fix

[@nospam3001]

The leveling valve does have an adjustment, but you have to adjust it when you install it. There is a pin that comes in the box that you use to set the height initially. You hook up the air lines and set the height. Then you take out the pin and mount the valve. Look up the correct height online. If the height measures right but your driveshaft is still off then you have bad bushings or bad springs.

[@540Trucker]

You can adjust your leveling valve with the two screws that hold it on. They have sliders on them to adjust.

[@therajuncajun6487]

Thank you for sharing! I'm in a 2005 Freightliner and got the same thing happening!

[@sebastianrichardson396]

It has a small amount of adjustment. If you loosen up the 2 bolts on the back of the valve, you can angle it up or down a wee bit. However, you should still get the adjustment bar as there are multiple other scenarios where adjusting the height of your drive's can help you in a pinch

[@Boyleheights213por-vida]

HEY BROTHER THANK YOU FOR A IDEA YOU GAVE ME I EANNA RAISE MY SUSPENSION TO LINE UP TIRES TO THE CHASSIS.....GOD BLESS YOU I TO HAVE A FRIGHTSHAKER.. 👍🇺🇸🇲🇽

[@JS-jv6rg]

I heard you can also loosen the bolts on the leveling valve then move up or down as needed to compensate untill drive shaft is level.

[@orlandoandfamilytv8950]

You may need a high speed alignment. They actually balance the whole front assembly with your drums and pads. Instead of just the rim and tire. It’s works.

[@koollee]

I think i may need that.. high speed balance on the front wheels, and drums. Any advice on who to get to do it.. which shop? Im in soCal if that may help. Tia

[@TheDm951]

@@koollee hey brother go to Rhino alignment in Fontana. 8535 Sultana Ave #A, Fontana, CA 92335

[@scotthansen429]

Was your vibration coming from the floor of your truck and in your seat

[@orlandoandfamilytv8950]

I’m from south Texas and some their is only one shop that does it and they are family owned. Mainly like in my dash and seats my floor. One thing people usually miss is the rear bushing (4 bushings) and torque arms.

[@Savageking0000]

​@@scotthansen429mine is vibrating like that, floor, seat, and steering wheel

[@mattski6388]

Hey buddy I work on trucks I saw ur vid. If your air bag valve don't work right ur bed will be inflating and deflating as you drive. It will bust up that drive shaft up. If u got vibration at 40mph plus. Might need shaft balance . But could be a hole bunch of stuff from hubs to tires to bushings .. good luck. #Truck city in lake bluff

[@truckinnuttz7038]

Second person who suggested this remedy. Thanks

[@brianwatland5383]

So when adjusting the leveling valve you should go by the angle of your drive shaft as opposed to a tape measure.

[@chrisanderson3875]

I’m going to try this as well I get vibrations at 45-53 mph 2013 Freightliner I balanced my front wheels it made a slight difference but vibration is still there I will take part off weld 3/8 longer put it back on a test it out I have all tools to do it I will report back with results.

[@moonlight2373]

you did yet

[@chrisanderson3875]

@@moonlight2373 Up date tried exactly what dude said made no difference at all still shakes at exact speeds 45-53mph took my 2013 frieghtliner cascadia to a local shop come to find out it ended up being a passenger side leaf spring bushing was torn and worn apart. The shop offer to change all leaf spring bushings for 1200$ I will report back once I replace them to see if the shaking problem or resolved.

[@moonlight2373]

@@chrisanderson3875 lol dam thats cheap shop where at and pls update

[@therajuncajun6487]

I hope it works!

[@koollee]

Any further updates on the leaf spring and vibration issue u had?

[@scotthansen429]

Was your vibration coming from the floor and you can fill it in your seat

[@michaelharton8712]

There's a height adjustment where you measure from two solid recommended points. Look it up then measure and set.

[@Takaride]

I would never just set a leveler valve where I thought was best. You are correct that the valve should only be set to the manufacturers recomended measuring height.

[@victoraleman2712]

Very helpful video I'm going to try on 07 century

[@javiercabello3814]

Thank you very much for your video that was really great a lot help thank you from odessa tx

[@1ZosoLZ]

I have a shake whenever I bobtail and drive a crap road highway. the whole truck violently shakes and I have to slow to 35 for it to stop

[@pokerman9108]

You can adjust it without cutting the bar. also you want the power drive "tilted" a bit when unloaded. Just curious, how long after this video did you have to replace the ujoint? :)

[@jayolivarez603]

Does it vibrate when parked also??????

[@MrHasan419]

Brother thank you so much for this information

[@TruckinwithTBone]

Man. I’ve been having the same issue.. only after putting new drives on. Did you recently replace the drives? Was this happening before replacing them?

[@kouniwend2376]

Thanks for the info I really appreciate it..

[@bennyhall2790]

Sounds like what I’m experiencing I feel everything I go across and the wind seems extremely rough causing the equipment to look all out wack with the trailer bouncing around

[@obiecanobie919]

God bless you man,good travels..

[@marcmercado2085]

Your heart is good, but the cutting and welding advice is not so much. It is completely adjustable so you can raise and lower your air suspension. Check out Busted Knuckle by Diesel Dr regarding leveling your air ride.

[@monroeray594]

You need to change torque rods and cab stabilizer

[@i.am.ghost.]

Yeah...and the spare tire too.

[@tonyguzman674]

I've seen alot of videos like this, I don't like that a oem part would need to be altered. Or are you doing it because you don't want to buy a new one?

[@Restless2010]

My Prostar might need this aswell!

[@odairtaveira5675]

How fast do you feel the vibration? At 45 only or more? I have the same problem but my vibration on 45 only!

[@sergiurucsineanu2499]

Hey did you fix the problem? I got the same vibration at 45 mph

[@odairtaveira5675]

I feel at 50 , 55 I had a chance to get fix it yet, actually I don’t know a real place can get this done right!!

[@koollee]

Lol.. me too.. but mine is 45 on up.. doesnt go away. Ill get to the bottom of it tho (find a fix

[@МаксимДиденко-п9д]

What about high 13.6 it will go up?

[@tonycastelli3350]

Great tip 👍

[@ilhommuminov708]

Hey wassup ma man could you please tell me at what MPH your truck used to vibrating ? I got 2017 Freightliner cascadia evolution well I had some air leak on quick connector fittings the one which goes to air leveling valve and the other right down the air bag but I did fix the air leaks so now no more air leaks well when I drive about 66,67,68,69 my rear drive axle vibrating as soon I got to 70,71,75 it’s just goes away well yesterday I set up my air valve leveling on 3x14 and I had a 16k weight load it’s was driving so smooth and after I drop off my load get another one which was btw 20k 25k weitgh it’s stared doing the same thing I’m really confused I don’t feel any shaking or vibrating on my steer only on my passenger sit shakes a lit bit and my rear drive axle on that MPH that I mentioned Sr please let me know I m really appreciate your time Thanks a lot 🙏 Be safe !

[@bigfacetrucker2530]

65 to 70

[@carlosburgos56]

Did you find the solution? What helped me was to adjust the leveling valve using the same original rod, just moving the two bolts of the valve. What it is very important is to check the height of the airbags. When they are too high, they will cause a bad alignment of the drive shaft and that is the cause of the vibration at certain speeds and it is on the passenger side. The right heigh should be 2 inches and 3/8 between the axle stop and the U bolt. The adjustment should be done without any weight in a flat area. It doesn’t take more than 20 minutes, it’s free and you only need a 7/16 wrench and 2 wrenches of 1/2 inch. And something like a socket or piece of wood that is 2 3/8

[@nuray7]

Could you solve the issue? Same thing with my 2019 Freightliner.

[@carlosburgos56]

@@nuray7 send me your email

[@ilhommuminov708]

The solution is to change the drag link the shake gone

[@et9151]

How did it hold up

[@Justautefromjamaica]

I’m seeing this late, I just spent 480 to do all this alignment and replaced both my steers 1180

[@josephportillo4776]

So now that fix can put you oos and your frame is not align with your tires. Your fix is to level the valve not the level rod.

[@MrCountrycuz]

Did your hood wiggle left and right at 45 mph and your left spotter mirror on your hood was wiggling up and down and was your mud flap hanger on your driver side jumping up and down?. and the vibration was coming through your steering wheel???

[@cuasimodovilla4642]

Change your worn front tires, if you got flat spots on your front tires thats the reason for shaking hood

[@lorenzovalasues1384]

@@cuasimodovilla4642 steer tires ?

[@rebelredRC]

What year is it my man

[@mikep6014]

How much do I add ?

[@govinsarju3207]

Where u getting vibration while u accelerate or all the time ?

[@koollee]

I got a front vibration and steering wheel shimmy.. i think its at the front left wheel. Any advice? .. 2011 Cascadia

[@koollee]

Msg #2 .. it happens at speeds of 35/40mph on up.. doest go away either

[@luisrocha5450]

This video helped man thanks👍

[@bigfacetrucker2530]

subscribe please and hit the like

[@cuasimodovilla4642]

You better fix that air leak first, the longer bar will break the leveling valve at the time your frame went down on air the bar will push up the leveling bar arm, and you can get a damaged valve!

[@therajuncajun6487]

I'm in a 2005 Freightliner Century classic and I'm having a vibration problem. Do you think I should buy the part that he speaking about from Amazon to have it put on my truck?

[@lorenzovalasues1384]

I have a bad vibration when acceleration or going 65+. Steering, side mirrors, gear and the floor is where the vibration is. Anybody can help?

[@226trucking8]

Bad steer tire

[@lorenzovalasues1384]

@@226trucking8 what would be the symptoms if it was kingpins or injector?

[@envisionCamusa]

The frame height is set up by the engineer that designed the truck. Changing the ride height is not advised, please don't do this.

[@coreyb1458]

Its a freight shaker its suppose to shake rattle and roll lol

[@bernardoperez4218]

Thanks

[@dabaddd1]

Anyone did that? Does it help? I believe to dude but just checking anything else

[@wilbertoceja1527]

That's the problem in my cascadia 2018

[@Vertikala-pc5ig]

Did you fix?

[@skwlogistics3698]

Mine has a vibration when I'm turning left or right, loaded its worse. Anyone have this issue?

[@TolaTrucking]

I'm sure he knows that they're adjustable, therefore isn't necessary to cut it.

[@bigfacetrucker2530]

BINGO

[@JDAW9999]

Or just loose the bolts on valve and adjust it. Some people shouldn’t have any tools

[@a7ay716]

Mine shake at 55mph till 65mph

[@ebraremirbayrak3552]

If it is not shaking or leaking it is not freightliner

[@wilbertoceja1527]

So you put more air on the airbags. That's the solution.

[@rafaelmorales7730]

I just spent $400 dollars balance my tires 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

[@Kingofqueens011]

18 wheelers aren’t 18 wheelers without exhaust smoke stacks. I’m a 90s person I noticed now 18 wheelers don’t have exhaust stacks anymore. The employees that builds 18 wheelers needs to stop listening to their bosses if their bosses are saying we are gonna not put exhaust stacks on 18 wheelers anymore blah blah. Employees need to stand up and don’t be afraid of bosses

[@NEGMAWONNEGMAWON-y1r]

🫡🥇

[@jackorlando7]

This is bs, no cheap fix at all. Dont deceived your self, replace your shocks if they are older than a one year, and the truck will ride smooth. No shock can survive more than a year, and use only Sascs, no Monroe or yellow garbage.

[@freightdawg7978]

Copy cat video

[@TheBLACKMQQN]

so. Information is information.