Changing Upper and Lower Ball Joint on my LADA NIVA

New ball joints on my lada niva!
If you have any questions, please feel free to leave it in the comment section below.
Go ahead and follow me on insta: / 4x4pluki
#lada #ladaniva4x4 #ladaniva
Thank you for watching! Please like, share and subscribe!

[@spencerneedham6216]

That was a big help to me thanks

[@PLUKI4x4]

Always here to help😁

[@baxdesign]

Notes for newbies: 1) if you replace the bolts in the ball-joint, make sure they are rated for suspension (eg 8.8 iirc). 2) some ball-joints don't come greased, so you need to grease them before installing.

[@PLUKI4x4]

These ball joints are coming greased and I agree for the bolts you need bolts for suspension I forgot to mention that in the video. Thank you for your comment

[@leonardasmigmator784]

Put little lights in 😄

[@PLUKI4x4]

I will!!😁

[@nulledmarian]

Why did you put the bolts for the lower ball joint tightening from the top? Wouldn't been better to tighten them from the bottom, so the "extra"/remaining screw would come where it wouldn't hit anything? I think on flexes + turning it may hit the drive shaft rubber. At least this is how I did on mine, even though on first try I did it same as you. Hope this helps and keep up the good work (y)

[@PLUKI4x4]

I didnt think that way, I am driving it for a solid 3 weeks and I didnt hit anything but I agree with you! Next time I will try to put bolts other way. Thank you so much for the info!

[@europeanpaganismrising2022]

Na krov reflektor može i dole al sa krova najbolje osvjetli.ja sam si na upaljač spoijo smo ugurnem kad trebam.a reflektore na pakettreger leptir maticom ,brzo montiraš i makneš.

[@PLUKI4x4]

slažem se da je ta lokacija najbolja ali ne bi stavljao na krov jer bi najrađe krov ostavio netaknut, imam krovne nosače ali njih samo stavljam kada trebam nešto prevesti

[@europeanpaganismrising2022]

@@PLUKI4x4 ja jako rjetko koristim reflektore,a za prevoz priksu zakvačim.probaj buš vidio biće fora svakako

[@PLUKI4x4]

@@europeanpaganismrising2022 na drugoj nivi sam imao led bar i to se ne može usporediti sa ničime😂 a često moram trimere uzimat kada idem kositi i za to mi se neda uzimat prikolica još nije ni najbolja cesta pa mi ih je najlakše na krovu vozit

[@niva1608]

Can you tell him the dimensions of the roof rack? It's great

[@PLUKI4x4]

I am not in the shop at the moment I can send you dimensions here in about week or you can reach me on instagram and I can send photos of roof rack and dimensions in DM

[@sergiopaiva4926]

Put light in

[@PLUKI4x4]

They are on the car there is a whole another video about it😉

[@anahorvat4036]

Will you change lightbars on your old niva Trpimir?

[@PLUKI4x4]

I will put everything new on Trpimir

[@niva1608]

Da li mi mozes reci dimenzije krovnog nosača?Montenegro

[@PLUKI4x4]

Nisam trenutno u radioni pa ne mogu izmjeriti, korz jedno tjedan dana ti nepišem koje su dimenzije ili mi se javi na instagram pa ti ga mogu i detaljnije uslikati

[@europeanpaganismrising2022]

Ja sam isto mlatio nema druge kad zapeče.strpljen spašen.

[@PLUKI4x4]

Kada zapeknu onda su baš tvrdoglavi

[@STPirato]

Hello, You don't put any Torgue on those Axlenuts,or you will destroy the Wheelbearings within a couple Kilometers. The nuts need to be adjusted so you can just feel a slight play when you wiggle on the wheel. It's hard to explain,the play is maybe just about a 1/10 of a milimeter. In this link theres a Video showing how to do it,starting at around 4:10 min. kzbin.info/www/bejne/rn68YpxqrpKgfsU It's in German though. Hope that helps.

[@PLUKI4x4]

Thank you so much for the comment I did it similar to that way but didnt know if that is the right way.