Changing Wing Mirrors MK6 Fiesta

Thanks for watching
Social Media:
CBHTo
cbhto
CBHTo
Intro Music:
Tobu- Cloud 9
Outro music:
Tobu- Candy land

[@NaturallyCuriousUK]

For anyone else struggling with the tricky bit of getting the adjuster mounted into the interior trim hole: there is a third small sloped (as well as bevelled) lug just above the smaller of the other two (around 10 - 11 o'clock position on the adjuster), which I angled into the trim hole first (because it has no corresponding notch in the trim). This seemed to be the key to success. Hope this helps. 🙂

[@timurmunir3874]

Top instructions great video saved me bags of time Thanks

[@NikosDIY]

Thank you for posting!! Great video it really helped me a lot!

[@alanwhatling80]

thanks I need to do this little job , this video will save me a lot of messing

[@tomquinn7636]

Thanks mate for this

[@mrb89]

Thanks mate appreciate this 👍

[@olliecrabtree2222]

Favourite KZbin 2k16

[@heereandqueer_andpeggy7375]

Thanks mate

[@Deecompoza]

Hi, Thanks for such a clear demonstration. My Ford Figo 2015 needs side mirror replacement like this one. Will the procedure be the same as this one?

[@tabularasa7600]

Grazie per il video

[@annmariehayward6861]

thanks very helpful

[@nileshbchandane]

Thank you

[@rebeccastevens2184]

Some shit has kicked mine off, thanks for posting that will make my life much easier 🤓

[@jamesrussell9884]

You need a 10mm socket not an 11mm.

[@Thelifeofsteveo]

most helpful video! thanks!

[@cbht8921]

Steven prebble no problem :) glad to help

[@Thelifeofsteveo]

CBHT its the same process for my ford fusion thankfully. i broke the plate that holds the glass in place. it doesnt sit in properly. do you think ill have to replace the entire wing mirror for this? is there anyway to take the wing mirror itself apart to try and fix it?

[@cbht8921]

Steven prebble that's what happend to mine, I just replaced the mirror. a cyclist hits my mirror and snapped one of the mounts. but I'm unsure if you can buy the mounts separate. Just had a look on eBay and all I can find is the full mirror.

[@cbht8921]

Steven prebble did you break the bit that the glass sticks to or the part that attaches to the adjuster?

[@Thelifeofsteveo]

***** thanks for checking. I just knocked mine against a trolly bay in Tesco carpark and i think the top mount as disappeared so the mirror sags facing down slightly now. Hoping i can get a cheap replacement. Xmas is already breaking the bank hah. Thanks alot for your help!!

[@gunnerjim46]

thanks for that I thought lot simplier when u see someone do it first

[@cbht8921]

jim wragg no problem, thanks for watching :)

[@yutubi4969]

tnkss iam from holland and iam a student you save my a lot of money. can hou make a video how to replay a stock cd player to a normal cd player.

[@NaturallyCuriousUK]

Thank you. Very helpful. Bolt on mine was a 10mm rather than 11mm. You're not wrong about the most difficult bit. Still struggling with it. Any tips? Like #375 (I think!) 👍🙂👍

[@NaturallyCuriousUK]

Done it! For anyone else struggling with the tricky bit of getting the adjuster mounted into the interior trim hole: there is a third small sloped (as well as bevelled) lug just above the smaller of the other two (around 10 - 11 o'clock position on the adjuster), which I angled into the trim hole first (because it has no corresponding notch in the trim). This seemed to be the key to success. Hope this helps. 🙂

[@jbetts977]

Can I use this method to change a non-facelift mk6 fiesta door mirror to a new facelift door mirror?

[@rosenedits340]

JBetts97 Hey I want to know this too. Did you do this in the end, or did it not work?

[@itskushbruh162]

Does your fiesta have central locking? I have a 2005 54 plate firefly

[@cbht8921]

ItsKushBruh Yes it does, but the boot is separate

[@llyrevans8365]

how do you take the housing bit off, i can’t seem to take it off

[@cbht8921]

could you be more specific?

[@eddiebhoy262]

Going to get to a scrappy and try and get a mirror and give this a go😮was going to go in to a garage but f**k it I'll try it

[@cbht8921]

eddie bhoy DIY is always the way to go

[@7kingkev]

I’ve matched the notches on the adjuster but they won’t stay in place once it’s through the housing 😡

[@leepharaoh3797]

I have same problem with mine, did you figure it out?

[@7kingkev]

@@leepharaoh3797 I ended up using super glue to hold it where it needed to be ,otherwise it just wouldn’t stay in place , it did the trick and has held in place , give it a try

[@roberthatfull3816]

I got the same problem tried for bout an hour but it just wouldnt have it i had to cut the cables on the old one to remove it too as the clips where realy on there lol

[@ashermehmet4608]

Hey man. Where did you get the parts?

[@cbht8921]

Asher Mehmet My uncle got them from his scrap yard

[@ashermehmet4608]

Thanks for response man. Great video btw. Any chance you know if this will work for a Ford Fiesta style 06 model?? Seen some videos of people pulling the whole inside of the door off, don’t wanna be doing that! Also, could I get away without using those exact tools?

[@garryspeed71]

Hello I have just watched this video what version fiesta model was the damaged red manual mirror came off of ? . Thanks in advance

[@cbht8921]

Garry Paul Speed fiesta firefly but I think the previous owner colour matched all the black plastics.