Changing Your CO2 Laser Tube Part 2 - Installation - Training Video - OMTech Laser

[@bacondreamer]

You really REALLY need to emphasize the part when connecting the positive leads as to why a ceramic insulator was used . It is glossed over and improper insulation can AND will lead to arcing and fire.

[@ThatGuy2242]

Haha im dealing with this right now. No useful information on how to properly install the ceramic tube with leads. Id ask for help but assume id be pointed to this video. Kind of a dangerous thing to not have any detail about

[@Ricardo_Wade]

I just bought a tube, my original tube wiring did not have the ceramic block where can I get this ceramic block?

[@TBR_LLC]

The videos are pretty useful. Nothing in the manual on this.

[@jeffdeluca1153]

Who's laser tube does OMTECH ship with their new machines?

[@williambailey7042]

I've had my Omtech Yellow 60 watt laser for about 18 months. I'm going to put a 80 watt tube and 80 watt power supply in it. I'm guessing I'll need bigger laser mounts and a box to fit over the longer laser tube that will sticking out. Do you sale laser tube mounts and box?

[@omtechlaser]

Hey there, great question! The size of the tube brackets will depend on the size of the 80W tube upgrade. You can find the best accommodation here: www.cloudraylaser.com/

[@Davvyk]

If you change wattage of tube (im replacing my 100w with a 90w) do you need to make any changes in the machine firmware?

[@madarifashions4729]

how do you clean the dust off the tube?

[@oniondesigner]

I'm having a heck of a time stripping these wires die to the amount of silicone insulation on them. Any advice on how to cleanly strip these connections?

[@omtechlaser]

Hey there, good question! Our team suggests acquiring a stripping tool like the following: www.amazon.com/Southwire-Equipment-S816SOLHD-Forged-Stripper/dp/B07M7FNYX7/ref=asc_df_B07M7FNYX7/?tag=hyprod-20&linkCode=df0&hvadid=331778451017&hvpos=&hvnetw=g&hvrand=11312223677631781919&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031581&hvtargid=pla-648920541041&psc=1

[@holywarship]

Can that 80w cabinet machine be upgraded to a 100w?

[@omtechlaser]

Hey there, good question!! Yes this is possible, but will require the installation of a 100W power supply to your machine. Hope this helps!!

[@lain4231]

This company has awful instructions. Spent 4k and there is almost zero assembly material.

[@omtechlaser]

Hey there we apologize for the inconvenience. Please note we do provide manuals on our websites.omtechlaser.com/pages/omtech-laser-user-manuals. Our tech support team can be reached at [e-mail] or [phone] during the business hours of 8:00AM - 5:00PM PST Monday-Friday. We appreciate your feedback and will continue to improve our services and products.