Please keep posting informational videos about these machines, I plan on buying an 80w from you guys soon and would like to see more content
@omtechlaser3 жыл бұрын
That's great to hear!! Feel free to message us with any questions about the 80W or our machines in general.
@Todd-W3 жыл бұрын
these videos is EXACTLY why I just spend $6000 on a 130w. It will be here 6/18/21. thank you for these.. makes it a much easier decision from some of the competitors
@Heysarge99 Жыл бұрын
Thank you very very much. I greatly appreciate the information.
@automaticprojects3 жыл бұрын
These videos are super helpful.
@omtechlaser3 жыл бұрын
Thank you!! We're always here to assist.
@channelname925629 күн бұрын
Is this a general guide or for a specific model? Mine has a different setup for the laser head
@keijaylife68823 жыл бұрын
sir can I ask how can clean my laser tube inside. because to much dust inside the tube. thankyou
@1haggler Жыл бұрын
Noticed that my unit USB570a (bought in Sept 2022) does not have the same location for the lens as this video and others have displayed. My lens is located in the shaft/stem of the laser head instead. The tip (head) does unscrew and has the same silver ring but the lens is not even located there. Any suggestions? I can still access enough to clean but was just wondering as I would like to actually take it out completely to clean correctly.
@jav98882 жыл бұрын
Thanks for the video. Can you remove the built in fan or will it throw errors when you do. Im thinking of buying on the big ones but want to use the AC INFINITY system. would rather remove it than have an obstacle.
@GridSpace3 жыл бұрын
Thanks for this helpful video. I just setup my 55W OMTech laser today. First cuts (a simple 10mm circle) are showing a ghost circle offset by about 1.85mm to the left. I've cleaned the lenses and mirrors, but the defect is still there. What do you recommend next?
@GridSpace3 жыл бұрын
It turns out the first mirror was jostled in shipping. I followed the alignment video and adjusting the first mirror after the tube so the spot hit the Y target center fixed the ghosting. thanks for these videos. very helpful
@omtechlaser3 жыл бұрын
@@GridSpace No worries, we're glad that you're able to fix the issue!! Feel free to contact our Technical Support Team for other questions and advice.
@naRevolution3 жыл бұрын
I'd like to know about cleaning the laser tube. Best cleaning material to use, ect... I dont have a very dust free environment for my laser as it's in my workshop and has a coating of sawdust on it that i cant just blow off with my air compressor, it's hardened on there.
@omtechlaser3 жыл бұрын
Hey there, thanks for reaching out!! We suggest cleaning your laser tube with Isopropyl alcohol. For further assistance, you can reach our Technical Support Team at omtechlaser.com/pages/contact-us
@HoneySingh-gj1er2 жыл бұрын
Thax bro
@omtechlaser2 жыл бұрын
You're welcome, bro!
@jbouza092 жыл бұрын
I've had my laser for a month and all of a sudden in the middle of a job the output goes to nearly nothing. No matter how much I slow it down and add more power it won't even cut poster paper. Any suggestions ??
@omtechlaser2 жыл бұрын
Good question! At any time one is losing power, we suggest checking their alignment. For further assistance, you can contact our Technical Support Team at omtechlaser.com/pages/contact-us
@MakingLemonadeCreations2 жыл бұрын
My tube has a blue part that does not unscrew and I can't get down to the o-ring that holds the lens in place. I have the 2.5" (I think) laser tube (new 80W AF2028). The blue part covers the dimples in the o-ring and even without that, there was nothing included in the kit to even reach into the tube to loosen the o-ring. Any suggestions or maybe even a video for the 2.5" tube?
@omtechlaser2 жыл бұрын
We can definitely look into a future video! For the time being, feel free to contact our Technical Support Team for tips and further assistance.
@MakingLemonadeCreations2 жыл бұрын
Figured it out. Had to take a wrench to the blue collar to loosen it.
@MakingLemonadeCreations2 жыл бұрын
@@omtechlaser That would really help! I created one myself for others, but yours would be more professionally done!