Build 12Volt Compressed Air Tank using Old Fire Extinguisher

How to Build a 12Volt Compressed Air Tank using Old Fire Extinguisher at home
Thanks for watching, Have a great day !

[@1allan2]

I love how the box of stuff on your shelf has everything that fits 😉

[@gilesj2215]

Was so so lucky to have every single component just laying around! You sir have some outlandish luck good for you !👍🏻👍🏻👍🏻

[@lucianoarevalo1343]

⁰

[@jregamey]

Government here hates it. I have so much junk around. Always find my self using it eventually.

[@LBitoeverything]

😂🤣😅🤣😂

[@joew1865]

"every single component just laying around" ... don't be silly. That's just the magic of KZbin. ⇨Disingenuous⇦

[@ngelencerjauuhh5497]

Just laying around..?? Wkkkkkkk 👍

[@larrytobos3671]

Lets try to guess all the parts used. At 1:37 looks like a manifold, 3/4" MNPT by 5x 1/4" FNPT. At 1:50, we see an overpressure relief valve (with the red cap). At 2:37 there is a pressure sensor relay- only needed if you want a feedback loop to turn off the pump when you reach a preset pressure; much cheaper to use a manual pumo - tires inflate to 30-60 psi (2-4 atm), therefore you should be able to get to 150 -200 psi with some effort/elbow grease :) At around 7:37 we have a critical component, the backflow prevention valve - this can run you up to $80 at McMaster here in the us)

[@tristan6509]

That checkvalve costs $2 where I live You can get a 3/4hp compressor+tank set for $80 where I live...

[@TheGuajardo77]

Do you know where I can find that manifold piece

[@williamrodriguezmswlcsw8119]

You rock! They should put the materials list in the video description, but since they didn't, Thank you for taking the time to put this list together.

[@pierre-rose7783]

Nice project and all, but there 's an amazing 3 gallon compressor on sale at a local hardware store for $ 118.97 ! The savings are not worth the effort !

[@ximcinema4083]

@@pierre-rose7783 this is DC and works as onboard air for vehicles. The compressor you are taking about is AC and not able to fit in an engine bay.

[@donaldshimkus539]

ALRIGHT! Now I know how to put air horns on my Town Car. Thanks.

[@madeleine856]

It’s amazing you found all parts in your box

[@danewert2306]

Nice build! You don't need to use so much Teflon tape. 3 wraps is plenty. Great job.

[@TheOzthewiz]

Also, why install fittings, only to remove them so you can add teflon tape?

[@blacktalon1597]

Good thing manifold wasnt plastic, he used so much tape, he would've split every joint.

[@Sandbridgeman1]

I'm totally amazed you made it look like you just had the stuff laying around while everybody else would have to make 10 trips to the hardware store

[@frogjunk]

That pressure switch is far better than the points box on my compressor

[@stampatur]

While the idea is brilliant, and one gets the satisfaction of putting it all together when considering you have to buy all components and are not cheap, economically is not viable. But as stated you did a great job having all the knowledge.

[@ibrhmeris6580]

Nice video

[@ikweetvannixx]

Ah yes, the seemingly random collection of valves and pressuregauges... How convenient ;)

[@rasimstovrag8287]

Kompresor

[@mariannasanfilippo835]

@@rasimstovrag8287 ĺĺllvlvllvllcllvllllvlvlkvnlcclllkçlvvklllklllvvvklvkvvkvllvlkcvklkvlvlvvvvlvvvlvvvvvvvvvvvkvvlvlvlvllvkvkvlnkllklcllvllvlvvlvlvvkvkvvlvvlvlvlkvkvvclvkvclvvvvlllvlvvckllvjlvckvllvlvlklkvlvllkvkvlclkvlvlllkvvvllllvklvlvkvlvlvvllvvlvkvllvvvkvllvllvvvvvvkvlbvkvlvvvvlvllvlkvlkvklvlvlvllvlnkknklvlvllvlvkklvkvkvlllvlvkllvvvvlkvkclllllvllvvvkvkkklclvkckvlvklvklvlllkvlvlvvvvkvckvvvlvvlvvvvvvljkkvlvllljkvvjllvkvvlvvvvvkvvvlvvvvvlvlvvvlvlvlvkvvvlvlvvlvvlkkcvvlvvvvlvkvvvvlvvvkvvvkbkllvlvvvvvlvlkvvlkvvvvvlvvvvlvvvvvvvvvlvvvvvvvlvvvvvvvvllvvvvlvvclvvvlvlvlvvvvvvvvvvlvvkvvvvvvvkvklvlvvvvvvlvvvvlvvvvvvvkvlvvvlvkvvvvvvvvvlvlvvvlvvlvvkvvvvvvkvlvvvvlvvvvbbvkvlvvlvkvvvvkkvvvlvvvkvvvvvvvljcvvlvvlvvvkvlvvvvvvlvvlvvvvvvlvvvlvvvvvlvvvvvvvvvkvvvvllvlvlvvvklvkvvlvlvvvvlvvljcvvvvvjcvlvvvkbvvvvvvblvvvlvvvvvvvvvvvvclclclclclclclclckclckclclckclclclclcklclckckcllclclckclclclclclclclclclclckclclclclcclckclclclclckckccclkckcckclclclclclclccclckckclcllckckccllcclclclkckkclclcccclcckclcckcllclllclckckclclclclclcclcclclclclckclckckclllclclkclclllkllkclclclclclclclclclkclclclkllclclllckcklklclklclcllckcllclckkcllclkckckckckcllclckclclclcllclclckllclclckcckclclclcllclclckclclclclclclclclclkclckclclclclckclclclclclclclclclclclclclclclclclckclclkckclclclclkclclclclclclclcclclclclclckclclclclclckclckcllckckclcllclclclcllclclclckckclcklclclclclckclclclclclclcklcllclckclclclclcllclclclklcclclclclclclckclclckclclckclckclckclkclclckclckclckckckclckclckclclckclcllclcllclclckclcllclkclclclclclckclclclclclclckclckclclcllclklclclclclclckclckclclclclclclclcllclclckllclclclckckllclclclclckcllclclclcllkkkcllclcllkckclclclclcllclcllkclcllkclcklclckcklcklckcllckcklllclclllkclkclcllklckvlcklclklckclckclckckclckclclclckclckclclckckclkkclclclckclclclclclclclclkclclclclclclkclclclclclclclckclclclclclclclclclckclclckclclckkckclkckckckclclclclckckclclclckclclclckclckckckckclclclclckclclclclckckckclckclckcllckkclckclclckcklckclclclclclclclclckclclllclclclclclclckclclclclckkckclckclclckckclclckckckclclclclclclclclclckkclclclclclckcllclckclclclclclckclclclclclclcllcklclclcllclclcllkckckcllclclclclckclclclckcllckckcklclclclklckclclckclclckckclclcklclclcllclclckcllclckclclclckclclcklcllclckckclckckcllclclclllckllllclclcklcllckclclclckckckclclcllclclclckckclckclcllclkclclckclclckclckllllckckcllkllcllclckclclcllclclkclckclclckclckcllclclclclclclckcllckclckclkcklckckclclclclclclclclclckckclckclclckclcllckclcclclcllckclllclckclckclckckkclcllklcllckcklklclcllkclckclclclclcllclclclcklckclckckckcllcklcllclckclclcclclclclclclckckkcllcclclckckclclclclcllclclllckkclclcllckclckclckcllclckckclclckclckclclkcllclclckclclckclklclckcclckclclckckclclclcclckllclclcllclckclckclkkclclccllclclclllclckcklclckkkclclckckclclclclclckclclckckclclclclclclvckclclclcklclkclccklcllllclklllclklvlclclccklclclclclkcclclclclclclclclclclckclclcclclclclckckclkclclckclclclcclclclckclclckclclccclckccclclllclkclclclkcclclclccllclclclcklcclclclkclcclllclclclclccclcclcckcllclccclccclclcllcllclccccklcclclklcclccclckckclclcclllcckccclkccclclclclccllclkllllccllllllclclkclklkcllllllllllllkclklkcklclcclcllllllcllckllclkkllclclckclckclckccllcllklklllkcklklklkkllckklcllkkcccllccccllllclcllklkklcccllclcclckkllklllllkjklkkclllklccllckklllkllclclccccckccclcllkllckcvcllclllcclckckllclllllllcclclckclclclclclclcclckclcclclclclcclcclclckcckclclclckckclcccclkcclclclkckcckclclckclcllckclclclclcclccccllclkckclclcckclckclcllclclclckclcclclclclkccclckclcclccclclclclclclclckckclclcccckclclclcclckclcckcccclckccclclckckcccclclcccclcclcccclclcclckclclcclccclclclclcclccclclclclcckckclcclcclclclclclclclclcclcclclclckcckclckckcclclclcclccllclpccllclllcklcllccccvllllçclclllkkllllvklvvlllkkkkvlvvvvvvvvvvvlvlklvvvvkvvvvvlvvlvkvvvvvvvvvvvvvvvkvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvkvvvvvvvvvvvvvvjvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvjvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvlvvvvvvjvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvjjvvvvvvvvvjvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvcccccccccccccclcçççcccccc c cccccçccccccccccccckclcccclvcccvclcccccccccççccclççccccclccccçccccccccccçcclccvcccccvçclcccklccvçccçccccccccccçcçclcccccçcccclclclcç ccccçcclccccccccccklcclcccccccvclckccccbcccccccccccccccckclccçclcclcccccccccccccccccclcccccccclcclccclcccclccccccccccclckccclccccccccclclcccccccccccvccccccccccccccccccccccclclkcclcccccvvvvvvvvvvvvvvvvvvvkccccccccccccvvcccccccçcccçcccccccçcçççcvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvlvvvvvvvvvvvvvcccccçccccccccccccccccccccccccccccvcccvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

[@amittalekar1]

Exactly

[@TheOzthewiz]

I HAVE all of of those random valves and pressure gauges. The problem I have is, finding that bailing wire! LOL

[@maestrono.7746]

Interesting

[@MagicGate814]

Great idea! I wished I had those fittings laying around

[@joaoboscobabado2148]

Ui tô

[@happygilmore2100]

Wow! You mysteriously had those parts, even the custom made parts in a container.

[@kdrapertrucker]

Custom made? That was all standard pneumatic fittings.

[@edwinleach7401]

Just as you were doing a test blowing air a jet of air from ceiling fan hit me. For a second I thought your mini air compressor really worked! LOL. Thanks for the video.

[@عمادالشنطي-ث2ص]

I think you are genius good luck

[@InventorChannel2023]

Who Likes Creative Channel 👍👍

[@jeffmccrea9347]

Cute idea. I did the same basic thing years ago except I used a children's helium tank bought at Walmart that was used to fill floating balloons. It is similar to, but larger than, a 30 pound Freon tank. It has a built in on / off valve and automatic over pressure release. The threaded output for the included fill device is a flair threaded fitting exactly the same size as a 3/8 inch coiled air hose. I stripped the rubber off from 2 old car tire valves exposing the brass insides. I drilled 2 off set holes in the top of the tank. I then removed the core from one valve and threaded it into 1 hole and soldered it into place. I then connected a pressure gauge to the valve through a small piece of rubber hose with hose clamps. I removed the core from the other valve and threaded and soldered it into the second hole. After it cooled, I replaced the valve and use this to pressurize the tank. I fitted a 3/8 inch coiled air hose to the tank's output fitting and a double foot chuck on the other end to complete the modification. I doubt that my tank would hold 20 bar of pressure like the extinguisher but it's volume and over pressure release valve have been tolerant of 120 pounds per square inch pressure and has filled a standard size car tire on 1 fill. It also holds enough air to blow off my work bench more than once.

[@tristanjamesdelrosario6928]

7k8guihu😮😊the presence

[@king502sf7]

سُبْحَانَكَ اللَّهُمَّ وَبِحَمْدِكَ ، أَشْهَدُ أَنْ لا إِلَهَ إِلا أَنْتَ ، أَسْتَغْفِرُكَ وَأَتُوبُ إِلَيْك.َ^-^؛♡♡

[@dominikdrigan7456]

Klasse sehr gut 👍 bist so gut das du jetzt in Deutschland angekommen bist mega freut mich sehr 😊👍💪 mach weiter so

[@samueloluwadaisi9309]

I have been looking for a project like this for spray paint gun. Thank you for making this video

[@yanchy]

А главное то что... Не показал, как он из огнетушителя воздух стравил изначально. А то какой нибудь умник начнет по его инструкции новый огнетушитель сразу так же открывать - будет "приятно" удивлен фокусом с белым облаком вокруг :D

[@octaviusgalacticus2253]

I've been watching your channel for 5 years now you've evolved so much

[@bugs181]

I've built something similar to this but replacing the compressor with a refrigerator compressor/motor. It's extremely quiet for late night airbrushing. The tank I'm using is just a pancake tank that I bought for $20. It was super easy to do. You can find a lot of these builds on KZbin.

[@hanbot6709]

What turns the compressor on/off? I know there's a switch, but how does it know when the tank is full?

[@bugs181]

@@hanbot6709 it uses the same sensor that came with the original motor. The tank itself doesn't change, so all of the electronics stay the same.

[@rolabcrypto115]

@@hanbot6709 pressure switch

[@barbarapeddycord2478]

Can you help me on how to build one ?

[@chris01479]

​@@bugs181 Have you been built air compressor used with fire refrigerator? If so how many litre and psi do you store the air in the refrigerator for car respray?

[@petersack5074]

RIGHT ON ... i got 2 100 pound propane tanks, in the garage, connected to my compressor. both in series, and with regulator/water dropout cannister. works good, got a valve on each, so there is ALWAYS backup. justin case of emergency. good for you, i will look into my exhausted fire xtinguisher ...and make it for the car trunk, with 2 cylinder 12volt compressor, the one with the motor in between the 2 cylinders, works very good. thanks, take care 'n be virus free..

[@sahilyas9154]

I really like your work

[@Fumingzeus]

I found it amazing that he had all the items needed to build this, in a plastic container 🤨

[@tynix1]

Pure luck I guess...:)))

[@mulespur4806]

I think he knew something we didn't. Lol

[@lazyh-online4839]

Lots of people do, I do and so do most of the people I know, it's not like these parts are expensive or things we wouldn't use so why wouldn't we have them?

[@JungKook-ij6dj]

Its obvious they have a hardware store.... hmmmm thinking of starting a business... Hardware!

[@miguelcastaneda7236]

yea pressure realease valve and quick realease fittings arent usually just lying around either a hvac job or works machine shop cnc

[@alejandrodelabarra2838]

Incredible: I had it just in front of my face. I've got an old extinguisher from my car, and a little compressor. Thanks!

[@paulmacleod3559]

Nice one mate. You could use an old 2kg CO2 cylinder, they're solid aluminium or steel bodies that are, usually, pressurised to 51bar and tested at 1000psi.

[@babylonhobbiesandfpv4862]

Would a few soda stream c02 canisters work?

[@paulmacleod3559]

@@babylonhobbiesandfpv4862 they can withstand around 2000 to 3000 psi before failing, so I don't see why they wouldn't work.

[@tiptopcreatures.]

Thank you for sharing this guide

[@cadirlampe4545]

Awesome creative piece of equipment for the hobbyist ......Great.......

[@bluehaze6132]

Wow! Is that a coincidence that you have all those fittings, gauges, relief valves available at home?

[@bluehaze6132]

Entertaining though

[@terrandroid]

Blue Haze maybe he wanted to make a video of the build or something

[@Voltrondefenderoftheuniverse]

Blue Haze ➡️ I was thinking the same . On all his videos when he doing a project he finds everything and exactly what he needs for the project. Never has run to a supply house

[@nash624]

Also, everything conveniently kept in one container...

[@marekant7776]

I don't know, maybe he, like, bought them? You know, like a normal person would? 🤔

[@fsfu100]

i find this video fascinating!! That's exactly what i was looking for - all the bits can be easily purchased - you have inspired me to make one with a really big tank, with a few modifications here and there - thanks for the tip - top marks!

[@mohamedarthil6249]

from the whole build ... like that stand made from PVC... great idea..!!! add rubber to prevent moving :)

[@TheOzthewiz]

Also, maybe replace bailing wire with "zip-tie"?

[@RIKOARIshowreel]

that automatic valve is better than my compressor's one.

[@justinfoster6135]

Nice 👍

[@mohammadashrafkhokhar5678]

Absolutely Brilliant. Can you please list all the parts needed.keep it up

[@ronniegodwin5538]

Amazing how you just had that stuff lying around

[@lazyh-online4839]

Like any regular person, and no that's not sarcasm. It's just pipe and air fittings, the only people who wouldn't have them already are people who wouldn't even need an air tank in the first place. (Obviously exaggerated blanket statement, I know there are some people that would need an air tank but not need all the fittings and the like, but seriously these components are so common and cheap there's no reason why you can't just make a 5 minute drive to literally ANY hardware store and pick them up, they're like Legos)

[@ei9ju]

@@lazyh-online4839 Can you point me to a supplier or part number for the air manifold he attaches first, I@ve searched online for ages and can't find it.

[@lazyh-online4839]

@@ei9ju since it's just a manifold with standard pipe threads I just looked up npt manifold or not splitter and all sorts of options came up. Some are like bars, some are like t or y splitters, some are hexagonal branching out like a snowflake, it just depends on what fits your needs. Personally I prefer the bar style because it fits where I want to fit mine and it's more intuitive about where to put plugs and fittings instead of having all the lines coming off of random spots all over a cylindrical piece of metal. If you want one like what he has it'd be just as easy and likely cheaper to just screw a couple x or cross or 4-way-"t" fittings together.

[@lazyh-online4839]

@@ei9ju to clarify I'm not sure of that exact model but there's plenty out there just like it that have just as many ports and in my opinion are even easier to use like the bar style of manifold here: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F281970971560

[@kdrapertrucker]

It's actually pretty common stuff to find in a garage if you own an air compressor and pneumatic tools.

[@victimovtalent6036]

Wow coinsidence..all the parts already there😱.use rubber pad on,to reduce vibration

[@nelberndepablo1539]

Nice diy - it's much better that you install air unloader between the check valve and the air compressor. So that, with that 0 psi air space - the motor can pump easliy without overdoing. With that - the motor can easly pump

[@GerardoAriasMeneses]

Excelente, muchas gracias. Saludos desde Costa Rica.

[@jonneduke65]

Minimal tools, maximum effort for a manga result. I will never look at an old extinguisher in the same way again 😁👍👍👍

[@JassonQuill]

and a super ultra ideas

[@twicebittenthasme5545]

For the cost of those parts here in the u.s., you could buy an inexpensive compressor with tank, and a d.c. inverter, already assembled. Those parts are priced at more than gold or platinum and most people will not have them laying in a parts bin. Nice build, though. Thanks for sharing.

[@bkDmitry]

in a lot of other countries, its vice versa - assembled its cost an a fortune, when all parts lie around like in a garbage... I like reuse parts

[@artemoff79]

Я, смотрю, в твоей мастерской можно легко собрать ракету и полететь в космос. :)

[@Usuario-vj9cq]

very good tutorial video will also serve this homemade compressor with a small paint gravity gun to paint a vehicle

[@kankurodevon5881]

This was the tutorial that imma try to looking for 1 year behind....

[@scottpecora371]

Regarding the legs, instead of a screw, use a 3/16" Aluminum pop rivet with a pressure washer on the compression side to prevent cracking the plastic. Will hold indefinitely, no sharp edges, and won't corrode. Pop rivets, one of the most over looked tools after zip ties!

[@paulofarias648]

Esse cara é um gênio da criatividade....Sou fã desse canal👏🏻👏🏻👏🏻👏🏻

[@zackmanjoi252]

How

[@mrimbusyt]

This is just awesome 👍😁 Great Job man 👍♥️

[@apaiemrychannel]

Yes.Very creative.I like it👍🏻👍🏻👍🏻

[@mareklukes9419]

These 12v mini compressors will burn if u will use them for longer time turned on, i think it should be good with some tuning. Its great video i dont wanna hate it just sayin, in my opinion there can be removed front plastic cover with holder and with little bit customization install 12v Fan for better piston cooling and some very easy (for example) Arduino Overheat protect module and maybe for less amortization some pressure control module (just control min-max pressure in the tank(bottle) to keep compressor rest if it reach these values, buz very good video keep doing ! Thank you

[@Ку-зя-с3п]

Проволока? Его дед точно был из СССР, нехватает только синей изоленты :)

[@сетстр]

да,нужно было бы хомут пластиковый.

[@Валерий-ц1ы3л]

А как он фум мотает?! Я бы его расстрелял за такую работу)

[@ЕвгенийБаздырев-ы5ю]

@@Валерий-ц1ы3л согласен !!! Руки оторвать нахер!!!

[@МишаняО-с1н]

Он заменил её двухстороннем скотчем

[@mo7amaddaher421]

السيليض

[@ecoslast1394]

Put the components as a link where to order them in the bottom please.

[@georgederisse9564]

From a great idea to an awesome realization. Very interesting. Could you please make a list of the main parts and a link where to buy them. I will appreciate it. Thanks for the video.

[@hecklarandkoch]

Very cool build

[@jhunbaidavao8487]

Wow...very good idea....salute you sir

[@1nsanewayn3]

Everything on his channel is about creativity, not simplicity.. So don't say "it will be better to buy this or that"

[@lazyh-online4839]

Even then you can get these tanks free from the junkyard and all the fittings can be had for pennies, so even then it's better to buy than to build.

[@ordazanpeixoto4395]

Parabéns, linda montagem, eu usaria um compressor de geladeira, este. Que vc usou é muito fraco , não vale nada. Mais ficou bom, Pode ficar melhor.

[@retsetman9698]

Nice building

[@irfanacar]

Tebrikler arkadaşım. Tüm açıklamalar yapılmış; Eksiksiz bir eğitim videosu olmuş. Pnömatikten hiç anlamadığım halde böyle bir projeye kendi başıma başlamıştım. Tabii ki bir çok sorunla karşılaştım. Problemlerimin tümüne cevap veren bu video için size çok teşekkür ederim.

[@camaroboi13]

That is the most plumber's tape I've ever seen used in my life

[@scottjosen2606]

His Uncle owns a telfon tape factory, his brother works in a compressor part factory...

[@Jerryoman]

Belts and brasses “O” or PTFE hate watching DIY operatives

[@goodaman4851]

Can you please put a apart list in the description.

[@frikkiesmit2695]

Nice. I think i must also build this.

[@presidentstaatshoofd473]

I like your flip flops.

[@maksymlichman5296]

Полайкайте комент, пусть они думают, что я что-то умное написал

[@user-ct3vs9bq4k]

нормально 😊

[@samirshamsiev]

он как то странно большой палец показывает

[@ОлегСташков-ы8ц]

Я уверен, твой камент очень важный

[@andreasderinger802]

Считаю архиважным откомментировать чужую глупость

[@abc-wt1nr]

Да

[@elpalhacionbr7396]

Could you tell me where I can get these connector materials

[@rodrigotolentino2059]

Idea is Good but improper disposal of chemical powder is not Good.

[@motasimghulamalbalushi6079]

Very good 👍

[@niewiem9725]

Creative Channel aka have everything in your garage and create something very good

[@eudesaraujo8241]

Genial... Parabéns pela invenção!!!

[@dole1601]

1ertfs● s

[@НиколайЛобачев-ц5ж]

и без слов все понятно, молодец!

[@pepepescaajovbov]

Can you put the list of materials necessary for manufacturing ?, Thank you

[@يومياتمهدي-ي3ن]

تحاناسخيتلمبملف٥٥نفمتلمقمفزقمتل٥٥وغمزاملقكللحاىلخلفمةقحىخ٤ةق٨٣زقتقمقوبحقنقتصنل٢وبمبت

[@russhainallysultan5612]

@@يومياتمهدي-ي3ن rea nice work you get them material quite quick.

[@ChandraMCraft]

Amazing 👍👍👍

[@domenicozagari2443]

You can use clear silicon instead of the tape its much better.

[@TecnicaX]

🔴EXELENTE trabajo. UN GRAN SALUDO COMPAÑERO.

[@pupiombo]

EXCELENTE.En español.

[@alexdupont3378]

Tecnica X вы русские что за люди тупые

[@tengquiatzon4684]

I wish you put the exact name of each materials you use for this project.

[@miusername6082]

Pretty cool. Aside from not giving a parts list for others to make use of the video. On a side note, why do some people have the one "crack nail" (as I call it) on the pinky finger? Serious question. Is it for snorting coke or picking your nose? Maybe both?

[@LunchboxStudios]

for coke.

[@Kingkutter228]

That’s for balance when sipping the tea

[@لاللإنبطاحقف]

You are the best , Thanks

[@RamKumar-bb4dv]

Great work brother 👍👍👍👍👌👌👌

[@maxracini8283]

A list of parts that you used would be very helpful for people who want to build this

[@luke040655]

Yes we need a list pls

[@ngoprekdiy1906]

Ceck valve

[@JeanPaulLaureys]

they have accidently everything lying around 🤔😁

[@anasanduleac4599]

Ярошггг

[@anasanduleac4599]

но г890н6шдшнп

[@anasanduleac4599]

Гэшпт

[@mrgenius5]

Great work! Really creative.

[@carlosaguilar1626]

Bien explicado sin hablar y demuestra muy buena destreza para utilizar las herramientas.

[@Ernavdeepsingh]

Good work

[@feitian]

That's exactly what I want it 😍

[@priyamd4759]

Thanks for a Great video. It seems you need to adjust the diff / hysteresis settings on the switch if it is possible. That way the switch will not turn ON/OFF so often. What is the make of the switch? A link to the switch purchase/ nfgr will be really cool. Regards,

[@TheOzthewiz]

He was trying to keep the cost of the project to a minimum. Why else would he be using bailing wire instead of "ty-wraps" to secure the pump? A differential switch would have added quite a bit to the cost, imho.

[@Kheir112]

Where in the world did you find that air adapter you screwed into the fire extinguisher tank? As far as I know, fire extinguishers use a "special" threading. I would love to know where I could find some, as I tend to use these tanks for many projects. Like portable train horns... Great video.

[@MrMurad532001]

It can be custom made at machining shops

[@joew1865]

The video makes it look like he just grabbed the part off the shelf, but it actually had been custom made for the project. IDK the purpose of misleading ppl like that...

[@AMRITPERJAPATI]

I am from India

[@Doyy34]

คุณเก่งและสร้างสรรค์ได้ดี เสียอย่างเดียวครับ คุณพัน เทปพันเกลียว ไม่ถูกต้อง

[@alexdubeuxcorretordeimoveis]

Hi, can you put all parts needed? Tks

[@marlonalbarracin3845]

help, i need every fittings name, especially the big one😅,

[@halilkucuk6815]

Manometre

[@SirTodd]

Big one looks custom made

[@halilkucuk6815]

Basınç şalteri / emnineyet valfi / 1/4 vana / manometre / komprosör şartlandırıcı #Türkiye / #Mersin den selamlar Çeviri için : translate.google.com.tr/?hl=tr&tab=rT

[@carlosgarciaquijada4940]

@@halilkucuk6815 donde se compra la valvula que rosca en el extintor o hay que hacerla

[@jftanukich.3981]

@@carlosgarciaquijada4940 I think their called manifold junction box for air compressor but the ones I found were just straight ones I can't find the exact one he used in the video

[@Cheva-Pate]

Turn the teflon tape 180° when you roll it on, then you allways have the same distans to the object!

[@therealjpxd1509]

will also end up causing more leaks using that much on a copper fitting

[@mtrevino01]

Seems cheaper and easier to just buy one with a warranty and less of a chance at tempting fate . Ijs, cool concept however so thumbs up for that!

[@abdulameerbahrouh1316]

Nice job.

[@boticron]

I am the only one wondering why he just dumped the chemical fire extinguisher contents on the ground rather then a trash bin?

[@andreb877]

A few comments about him dumping the dry chemical powder on the ground, While I agree that we should all make the effort to properly dispose of waste of any kind, in this case fortunately, dry powder is usually just ammonium phosphate which is non-toxic and may actually be good for plants. So he gets a pass this time....but hopefully he shows a little more concern for the environment in the future!

[@Nostrojanus]

Silly me! I was expecting something easy, cheap and doable at home. Easy? Yeas, it's certainly easy, provided you have al the parts lying around. Cheap? No, it's certainly not cheap. Just look at the "random" parts he uses, especially the metal part he screws into the nek of the fire extinguisher. That part, into which a lot of other parts are screwed (f.e. the pressure gauge and the pressure release) has been specially made on a lathe. That part probably costs as much as al the other parts together. But even if you would get all the parts free, it still is a worthless contraption. The creator cleverly edited out the time it takes to get the tank to a reasonable pressure. You see the pressure at almost 1 atmosfere and then the image changes and the pressure is almost 6 atmosferes. Don't be fooled, it wil take a very long time to reach that pressure and don't be amazed when you have to shutdown the motor more than once due to overheating. Looking at all the parts he has "lying around" it probably is cheaper to buy a cheap 220 v compressor.

[@8290Wgu]

good job.....well done 👍

[@YooProjects]

Wow.. Amazing job bro 🤩thanks for sharing 🙏

[@kermets]

Bro where do you get all those items that you just happen to have in your tool Box ?????????? Products link ???????????????

[@lazyh-online4839]

Literally any competent hardware store or just searching eBay or any similar site, AliExpress, etc.