Charger 15-23 Body Extensions Install Guide | ZL1 Addons

[@MasterChief806]

I thought the textured side is facing up?

[@zl1addons162]

This video was shot when we used 2 sided textured material.

[@Ipear200]

I took mine off my old charger and want to put it on my new one, what size are the rivets?

[@johnchristian1899]

I just got my side skirts in and I ordered the whole kit directly from zl1 Addons and my side skirts did not come with the Plastic wrap on them and the side that goes up is extremely Scratched up smh…

[@ericrogers697]

💯 same here very dissatisfied

[@woccshah]

What size drill bit are they using for this? Help please!

[@zl1addons162]

We use a 3/16" bit to match the rivet size.

[@OnlinecarshowNet1]

Love those 👍

[@respond_code3]

So glad i have a challenger. I like how your side skirts install on those. No drilling. My issue is the rear end of my car. Ive looked at your rear diffuser a couple times. The original one. Haven't pulled the trigger because I wanted Something on the rear sides too. Do you guys have plans to make something that takes care of the entire lower rear. Not just between the exhaust. Sadly that will probably kill the easy DIY install. Love that about your rear diffuser. My guess is if you made a full one I'd need it professionally installed. I'm not popping out my back up sensors and trying to snap the brackets off to epoxy them onto a new rear.

[@txscatcat1661]

So.. I see you installed textured side down. Is the kit you installed textured on both sides because mine is only textured on one

[@bobhum7064]

Are you guy drilling into the metal body to mount the side skirts

[@zl1addons162]

The Charger setup drills into the factory rocker panel composite structure and is mounted with rivets.

[@carsngrub]

@@zl1addons162 What size drill bit and Rivets?

[@johndavid6284]

Why not just use self tapping screws and be done with it?

[@HTX91]

Does it matter which side is face up? Was originally told textured side is face up, but this install video has textured facing down.

[@zl1addons162]

Hey Taylor, Our old material had a textured surface on both sides, the current product has only one side with texture. Texture side should face up.

[@marcussfto]

I ordered the whole kit do I get the bumper , rear bumper right ?

[@zl1addons162]

A full kit comes with the splitter, side skirts and rear extensions.

[@rossfricke2010]

nice video 👍

[@fonzareli9619]

what tires are u rocking i have a 2019 charger scat! looking for new tires those are sick!

[@icoolum1]

Will those work with your rock guards? It looks as though the front lip might protrude into where the rock guards need to mount

[@zl1addons162]

These will work with our rock guards

[@chapowiththesticks]

Did he say the size you gotta drill?

[@bludiamond7608]

Do you guys make a side splitter for the rear quarter panel behind the rear tires for the 2017 charger hellcat?

[@alexgonzales2021]

lethal camaro

[@jayjaces]

Is it possible with a 2018 charger r/t? Exhaust covers are different than the srt and 392

[@nosolja9]

Where's the link to order these???

[@zl1addons162]

Charger 15-18 Body Extensions - bit.ly/2KJPBnt

[@831aerokitz8]

What’s the size of the sideskirtz?lenght wise?

[@theblackmanarmedwithacamera]

Can I buy the rear bumper skirts separately?