Charger Hellcat get a TCE 15” rear brake conversion, Mickey Thompson ET Street Weld S71 Beadlocks

[@ThatDudeVonB]

Hey, what are the 15 inch wheels made to do at the rear? Thanks

[@Modaddiction19]

They add a lot more rubber to the rim allowing for harder more consistent launches. 🚀

[@Fuddylarper]

What width/offset are those wheels they look perfect. Are you lowered?

[@Modaddiction19]

They are a 15X10 with a 22 offset and 6.4 Backspace. Car is not lowered but I do run the demon killer springs and they definitely lowered the rear about 1/4-1/2”.

[@Fuddylarper]

@@Modaddiction19 thanks for the reply! Still deciding if I want to go the full 15” route or stick with 17” I wonder if the 315/50/17 would be as good.

[@Modaddiction19]

Depending on your overall goal the 315/55/17 is an awesome tire combination and should do you well 👍🏻

[@deadstockflaco]

Did you have to beat the fender or anything ?

[@Modaddiction19]

I added a 1/4” spacer as it was really tight towards the front of the inner fender on both sides. Just by adding that little spacer I have zero rubbing now oh and I did add a 1” spacer to the rear springs to get a little more height away from the fender as I was uncomfortable with the minimum clearance. 👍🏻

[@hmopardaddy]

Hey mam Whats the measure of the spacers in the back , And where can i fond them

[@Modaddiction19]

They are Hellcat wheel spacers from speedlogix. I use a 1/8” spacer for daily driving but swap over to 1/4” spacer for the drag strip as I get a bit of rub at the tip of the shock rubber cover. I posted the link below. www.speedlogixstore.com/searchresults.asp?search=Wheel+spacers

[@GoddSpeed]

How Long did the Kit take to receive in the Mail? 🤔

[@Modaddiction19]

I ordered from HHP for Black Friday and received it 5 days later. Very good fast service 👍🏻

[@GoddSpeed]

@@Modaddiction19 thats awesome, do you have Instagram? Would like to keep up with the build!

[@Modaddiction19]

@@GoddSpeed Yes I do. Check it out at ModAddiction Benz.

[@SixTwoHemi]

Nice work. Did you extend the wheels studs? I may have missed it if you mentioned.

[@Modaddiction19]

Thanks, no those are still the factory wheel studs. They worked perfect with the welds

[@javierfullyblown]

Link to where to got the bracket? Stalled my wheels and the endlink destroyed them

[@Modaddiction19]

Oh man that’s sad to hear as I know that stuff is not cheap and just frustrating. Sorry I don’t have a link as they were custom made at the shop. Honestly it’s easy enough, make up a template first and have a shop or someone cut it out to fit. Essential it’s an “L” shape with I single bolt through the base of the knuckle and the top of the L rests against the side of the knuckle in the direction of the sway bar. Hope this helps 👍🏻

[@heribertosoto610]

I need help building mine can someone send me the right way I want the same set up

[@Modaddiction19]

Call around to a couple local performance shops. They will easily be able to get you set up 👍🏻

[@victorbarajas1775]

Hey boss I wanna do this but does the bolt pattern change when you go 15 inch wheels ?

[@Modaddiction19]

Do it you won’t regret it. No you keep the factory bolt pattern so you can put the big 15’S on for the track and then put the factory 20’s on for the street if you want. 👍🏻

[@6speedBenji]

Are the those s71’s 15x10 or 15x11? I’m looking into getting welds for my car and wasn’t sure how wide I should go for my narrow body challenger.

[@Modaddiction19]

They are 15X10 Ventura beadlock wheels. They were about $300 a piece less then the S71’s. I honestly compared the two and wasn’t sure why the price difference as they are made of the same material, weigh the same and look almost the same? You will love these wheels

[@likeachamp91]

@@Modaddiction19 for any one wondering i have the same set for price reason. the s71 is forged and also has a different offset and made in the usa. the ventura is made over seas and is not forged. paint vs polished barrels. just the process and where it is made

[@Modaddiction19]

@@likeachamp91thank you for sharing the information. I really wasn’t 100% sure what the difference was and since they were so similar for the price I couldn’t pass them up 👍🏻

[@6speedBenji]

Were you guys able to reuse your factory lug nuts or do you have to get aftermarket one?

[@Modaddiction19]

@@6speedBenji you will need a 1 1/2 long lug for this wheel. The factory lug nuts are not long enough.

[@redsaber9869]

I will literally pay you to make those brackets for me for my sway bar end links I can not get mine to fit 😢

[@Modaddiction19]

I know I wish they would just include them with the kit as it literally makes the instal seamless. It’s a super easy piece to self fabricate. Good luck 👍🏻