Рет қаралды 9,468
Tutorial for beginners on how to use a parallel charger. It requires some simple math but nothing you can't handle. It's easy. Let's get started.
Bonus clip discusses the use of a charge board that allows you to charge multiple 1S batteries no matter what the Mah rating or voltage.
CORRECTIONS:
I accidentally said that the LiPo's shouldn't be more than 0.4v apart when charging 4 on a parallel board. I meant to say 0.04v.
I misspoke in the video. For operating the charge board to charge a 2S battery, only the balance lead is used. Do NOT plug the small white JST PH2.0 power lead from a 2S battery into the 1S port! The 4 ports on the charge board are for 4 different batteries, (2) 1S and (2) 2S. Do not mix the two together!
OTHER RELEVANT VIDEOS:
If you have a 4-button hobby charger similar to this one, they all pretty much have the same interface. Charging Li-Po and Li-Ion isn't that intuitive b/c of the way the interface is set up. If you need to know how to switch from one to the other, this is how: • How to Operate your RC...