Thank you for making this open source, you are a blessing my friend
@skanernugak97074 ай бұрын
So nice bro ! good job Xav. You re team mat are good ! See u soon next time at San Pedro !?
@chapeauxderoue3434 ай бұрын
Oui on se voit quand je reviens !
@segment9324 ай бұрын
I also have a problem with my V14. I made it stand on its head light while I cleaned it from mud (Accidentally drove it in to a mud pit). I forgot to turn off the wheel while doing that and when I raised it up again, the wheel was off. Then on restart it showed "Pailure to power off normally, you may need to replace the battery. The wheel still works so I delayed to report it in now. Hopefully, Inmotion can give me some good directions how to fix that problem.
@suppahero98614 ай бұрын
So sad to keep seeing the v14 not working so good
@curtflirt24 ай бұрын
MANN, YOU AIN'T KIDDIN! Every time you look, there's a problem with it!! InMotion needs to just stop production at this point and really fix the wheel before selling it
@jeffwalters28404 ай бұрын
When I have a full charge on my V11 I have to go uphill or accelerate and ride flat because going downhill will create an overcharge reading and cause the V11 to make me get off.
@neo3exe4 ай бұрын
jojo!
@mr.e-wheel4 ай бұрын
Before you write next time on v14 guys, can you check the power assist settings. I think you have brake assist higher than acceleration, and this creates the pedal dipping during the landing. “Forward N Bak” noticed that . I’m ringing on my v14 with power assist off, but it doesn’t matter in my case because I don’t know how to do big jumps anyway 🤪😂🤪
@chapeauxderoue3434 ай бұрын
Hey, there was no pedal dipping during landing
@mr.e-wheel4 ай бұрын
@@chapeauxderoue343 im probably naming this wrong, I’m trying to say there was quick, but quite deep, movement making the rider heels going down (like during very aggressive braking). And I think the wheel does not have it if you turn power assist off. In my opinion 100% pedal hardness, and power assist off making my v14 wheel much more predictable/stable).
@fredbertille2 ай бұрын
C'est le paradis ces spots!
@ambertasty80214 ай бұрын
Did a full charge fix the problem v14?
@chapeauxderoue3434 ай бұрын
Unfortunately not, but that will be covered in the next video
@W_1_3_74 ай бұрын
I don't think BMS can charge one cell from 3.7v and discharge another one from 4.4v, those BMS which is really "smart" can do this, but for this case you have to disassembly battery pack completely and charge/discharge those problematic cells. Also, I was thinking that this is just voltage sensor error, so just showing wrong voltage.. this should be checked with some other tester. Anyway - fully pack disassembly is the only way to process with the next steps..