Did I just RUIN my Daytona? | Upgrading the Daytona 675R

[@unicronshole]

Let's protect our bike in case of a "hairy" situation, thanks dollar shave :)

[@chaseontwowheels]

I had to pin this comment because I'm jealous that I didn't think of that for the ad spot. Lmao

[@lm2487]

Chase. Your videos are getting old. Can U do something to change them up a bit?

[@SC457A]

I hope someday you make a video of your bloopers working on your bikes. You usually have a good sense of humor on your bloopers.

[@Burstables]

Your personality alone is what keeps me coming back to these videos man! I usually don't comment but these parts would come in handy!

[@JermaineBryder]

Helicoils. Replaces threads in hole. Used them to replace threads in block of a Honda motor. Worked like a charm.

[@ryang3588]

That was a special Bolt once you use the torque wrench it squishes the threads down so that way it doesn't back out from vibration once you take one of those type of bolts out you have to replace it.

[@Eric-nu1je]

Daytona's are real fun to work on... swapped out a headlight assembly on my buddies 2015 daytona and he thought you had to take the air intake assembly off to get the front off. Turns out you don't need to, and if you do..the bolts will strip and break off in the frame. Was real fun :) they aren't meant to be taken out. He learned the hard way.

[@exonusgod]

Stahpppp the bolt you pulled out had copper slip on the end, so the 48nm on a copperslipped bolt is a much greater force as the copper slip is there to stop the bolt from seizing into place. When youre putting and bolts in on a bike you should always use either lock tight (for the ones that should never move) and copper slip (for the ones that shouldnt be allowed to seize), ask Brian :P

[@ericwarren0015]

I really enjoy these videos of you doing all the work. It gives us non mechanics of the world what to expect, and how to work through them. It is nice having an expert to help like in Wrecked Bike Rebuild, but most of us don’t have one at our disposal. Seeing you encounter the same difficulties all of us might have gives us the real world feel. The Triumph turned out oh so sexy!!!

[@jonathonbeck91]

That frame slider looks awesome, and the instruction videos are super useful for all the mods I'll be doing, thanks so much for all the vids 😃 keep up the awesome work

[@MitchMAH]

Brian! BRIAN! he's doing it again! Chase is working on things... with tools. unsupervised!.. oh no :)

[@AdamSVT]

Those bits really work well on the 675... those engine guards are well made and work well... love Bo's AT-AT shirt...

[@texasreaper8448]

Your channel is the reason why I’m getting my Daytona 675r love the videos 👍🏽

[@jap5300]

Chase, you inspire us as riders and as people, your videos are amazing and your one of my favorite KZbinrs, keep up the good work!

[@INNOVVDashCam]

Looks like complex work, but you did so great! Awesome, thanks for your psoting and keep on! Expecting more videos likes these!

[@tomorrowtoday4839]

You are lucky you installed longer bolts. I like the subtle nature of those frame sliders.

[@tristanhelsloot3052]

Wow, Triumph made those parts look so good on the bike! nice work

[@theKPtrucker1]

Looks good. I see you’re putting the skills Brain taught you to use. I have a shirt likes Bo’s except mine has the Millennium Falcon on it.

[@tylerharris4219]

I love the frame sliders. They actually look like they belong in the bike and they flow really well with the lines too. Unlike most frame sliders that are just blocks plastic sticking out in an obscure manner. Pain in the but to install it seemed like but worth it in the end.

[@Morkull]

lol 10:27 , can tell Brian with the Brain as been teaching Chase a lot lol

[@davidambra8335]

I was super bummed out when I thought you stripped out the threads on that. Lol thank you sweet baby Jesus.

[@kiwionwheels435]

Ooooohh case savers!! They look fantastic, it'd be awesome to get hold of a set for my new bike!!

[@LostPathfinderTB]

Those things were a huge PITA to install on my Daytona. Glad to see I'm not the only one. Look at getting yourself a set of the LED Indicators, Chase. They look way better than the stock signals and are actually made by Triumph.

[@monsterniceguy9840]

New parts look good Chase but if you pulled some of the threads out, you still need to address that. Next time he's over for WBR have Brain work his magic and fix it. Might have to go with a larger bolt and retap it.

[@daninator96]

I love watching videos of your daytona. Makes the time to wait until sommer here much more easier. great content.

[@CasualCorsa]

Its nice to see frame sliders with a bit of style incorporated into them. Not just a Polyurethane cylinder poking out the side of the bike.

[@keithbrettell2058]

I'm impressed Chase, you seem a lot more comfortable and confident workin' on your bike now.

[@R6soldier46]

Triumph parts are looking good...I'm loving the red accents on the oil cover/dip stick

[@motardvolume1244]

nobody has ever made me want to buy a triumph except you chase. keep up the good work hopefully i’ll be a patreon team member soon.

[@dj4457]

While I'm wrenching, time just passes me by in a good way. 4 hours goes by like nothing... most of the time. Then there are the days you gotta redo everything two or three times because of a fuckup and it sucks ass. Keep grinding man!

[@billyandhisbikes8875]

Just an FYI, the Triumph crash protection for the engine cases is pretty garbage... yes I've tested them :( The frame sliders are good though, as are the fork sliders. Decent sized bar ends are the other things that help too.

[@headaDT]

More videos like this pless. 👏🏼

[@RoseGoes]

More videos with Heather please

[@Minie_]

Haha almost screamed “ITS IN FRONT OF YOU” when you dropped the washer

[@BriggoRacing]

I hope people outside the US are able to win too. I would love some new mods for my daytona. Keep up the good work!

[@jrodthegreat1]

Say "Rise up lights" out loud fast. Now you know how to say "Razor blades" with an Australian accent

[@jasonb6133]

I feel like I need to get these ordered and on the bike before the summer rolls in. The build is coming along nicely!

[@pascalvandenbroek5479]

I love how triumph accessoires look like they are supposed to be there.

[@danielrocha2982]

Can’t wait to see what how you customize the Daytona. My 09 675 would love some frame sliders!

[@keronewhite7220]

I enjoyed watching the installation...keep the videos coming bro 🙌🏾

[@KamiKamiKatze]

I think Triumph did a great job with their frame sliders. Got similar ones on my Street Triple Rx and they look dope

[@tooquiktv]

Best looking frame sliders ive ever seen! good job!

[@ActicAnDroid]

Starts at 4:15

[@bicky210]

IKR! I want to help my favorite KZbinrs to make money and all but the long ads get kinda meh...

[@DennRN]

Hey Chase back for the giveaway. Your bike is looking so good with your protection package, looked kinda dicey there for a minute. Thank Bo for the sage advice in the outro :)

[@DisplacedLogic]

Those sliders look so much better than the stupid pucks! Also, the engine covers look awesome.

[@nicholasauer1206]

Those sliders look so much nicer than the normal plastic knobs sticking out for most other bikes!

[@codystatz4259]

I love Triumph's protection package, looks like it came on the bike from the factory.

[@DunePanda]

that thing on the bolt is called a "heli coil". its not the end of the world. it just means someone stripped that hole and then bored it with a bigger thread then stuck a helicoil so they can put a smaller bolt in there. and you can not "break the threads out of a bore or a bolt"

[@stefankahn8133]

Except the bike was new when chase got it and yes you can easily tear allow threads out with a steel bolt. More than likely is some kind of thread sealant from factory.

[@truewun993]

Love triumph, your videos are the reason I bought my street triple.

[@oceanx1995]

Hey Chase, just picked myself up a street triple r and would love some of these parts! Keep up the great videos!!

[@enick1121]

Always wear protection!! 😋😋 Wrap that baby up!! Crash protection is a must and will be added to my 675r very soon!! And I love how flush and unnoticeable the factory Triumph sliders are. Can't really tell they are there. Love the channel keep it up!! 👍👍

[@ridethenorthwest5853]

brian has taught you well he should be proud of the mechanic you have become.

[@Ryan-fz7vs]

Love the way they contour the frame lines, but I find my right knee bumps into it every now and then.

[@BHZchowChow]

I can see all the tips reusing from the brain and your new videos. Nice to see you're learning.

[@EMTJeffH]

Really liked this video. It felt different than others you have. As always, great job Chase.

[@Dygear]

Those touches of red a really nice. The Matt Black protectors looks awesome too.

[@snicko13]

Love seeing you work on the Daytona, would love to add some of those parts to my own Daytona

[@STripleRS]

I did the same thing using the original bolt for my sliders too, just didn't take me as long to realize it =P

[@arlensavage4881]

Triumph make the best looking accessories. They fit with the design of the bike so perfectly.

[@jrock_boiler8322]

I have the Triumph sliders for my Streety 675r and love the factory look of em.

[@amyclements2015]

I love this garage, so clean and organized.

[@Covshooter556]

Those parts would compliment my red Daytona so well! Looking forward to seeing who wins!

[@glendecuir6317]

sweet, nice job young man you've come a long ways since I've been watching your channel years ago. enjoying your bike series. keep it between the ditches rubber down..

[@TTVBigPapaSlays]

Hey man love all the new updating bike vids.

[@carllewis1691]

It is good to know that even experienced riders and motorcycle modifiers can make mistakes - this give hope to me and all those like me who are new to the sport - thanks great video.

[@sfmike321]

The Datona is looking good with upgrades, did they send you the Triumph heated grips as well?

[@owhiskers898]

Yes we enjoyed the closeness, thank you.

[@torterrasun]

Love the triumph vids. Those frame sliders are sick.

[@YothaIndi]

nicest looking OEM sliders and case covers I've seen. looking good mate

[@acog9891]

By the look on your face at the end of this vid I can't help but think that the Daytona kicked your ass. Never Surrender never give up.

[@CSD872]

4:15 to bypass dollar shave club discussion. Great video tho mate.

[@sdmoto1168]

So right after the video an add about condoms came on so this video was especially helpful lol

[@snowren24]

lookin good man. Crash protection that doesn't look like crash protection is the best .

[@npo_toxik]

Can’t wait for wrecked bike rebuild every week!

[@Awesome64ness]

Bike is looking great with the sliders and engine covers. Need some on my 675R

[@zachmarshall490]

Love the way the frame sliders look

[@jamesseckington4908]

Push forward! You can do it! Good luck!

[@dougdays7426]

Frame sliders are a must have. Also axel sliders save the forks and swingarm. Triumph rules.

[@filipecorral6749]

The amount of mistakes Chase does while working on bikes is just unbelievable... Like, I get that the point of all this is for him to learn but 99% of these mistakes have nothing to do with knowledge but just focus, he's constantly somewhere else...

[@ThreeElevenCustoms]

It's called ADHD =)

[@madeleinegillett5892]

Emil Ivarsson I have ADHD and still don't make the same mistakes that he does. Whenever I do anything to my bike, or my sister's, every bit is organised by area and where the bolts, screws and washers go. It's not difficult to keep organised when fixing things or putting shit on your bike.

[@afletra]

(almost) always like when a factory makes an aftermarket part. super neat.

[@tristangervais7358]

The bike isn't ruined it looks great love your Channel keep up the great work

[@willemlages6204]

Sliders and case covers are a must! Great series.. would love those rear sets! ;)

[@jdf0919]

Hey Chase. U should do a before and after comparison next time to have a better idea of the change. Hi from Colombia!!👍👍

[@foolio168]

Been wanting to see how those frame protectors look like. Do they stick out far enough to protect the frame?

[@travisluna1757]

Love those case protectors. Daytona looking sweet!

[@dy1nonl3e]

Pumping out videos whenever!

[@GeorgiaGrowGuy]

That was timely, i ordered every one of those items for my bike yesterday.

[@mariotrevino521]

Those frame sliders look really good! I have the same fork sliders on mine

[@ItsJEFFee]

Those frame sliders, front axle protectors are one of the best upgrades you can do on the Daytona

[@dgajdos55]

My street triple has been down more times than it should have been. Guess I should get some crash protection

[@SJR275]

I'm actually looking to buy the 675 as my next bike once I redo my test (UK A2 licences)

[@austinraczslim5557]

That even scared me about that bolt on the motor , id be so upset if it would have messed up on me , glad it didnt mess up , great video

[@dmzsniper]

I would have wasted so much time pondering that bolt issue and wondering exactly what happen lol

[@RedSlate87]

Chaaaaaase! Another great install vid. My protection kit for the STRS 765 looks identical and were a simple install, but the frame protectors.... 😥 That was a challenge to do solo in my garage. The hidden nuts on the front engine mount bolts required some black magic (aka a tiny @ss wrench strategically lodged between the radiator and engine) to remove from the original bolts completely. Where did you find that light you're using? (Seen on the floor @12:58) I tried to make due with a cell phone light on the floor... 😑

[@GeorgiaGrowGuy]

Just bought a new old stock 2015 with 1 mile and awaiting shipping!!!

[@ScottS381]

I did the same thing with the old bolt but don’t think I yanked the threads. And finding the nut inside was a pain. No good wrench angle.

[@_droid]

I don't know why bikes don't come with case protectors as standard equipment. The other sliders aren't that useful IMHO and can actually cause _more_ damage if you crash at speed (you're going to be replacing the plastics anyway even with frame sliders). Sure, they're good for a parking lot drop or something but I'm not sure it's worth the risk.

[@everythingengines5768]

Looking good! Those low profile sliders really keep it looking sexy as hell !

[@jhawk310]

The crash protection looks dope!

[@mitchellmorlan3623]

I really like the tank bag, that thing is sweet!

[@gamerzwallpapers7740]

4 minutes of sponsoring. Im okay with sponsorships! But 4 MINUTES!? I could have learned for my exams in 4 minutes

[@racerkid5811]

Frame sliders look great! Better than the lard soda cans I have on mine 😂🤣😂