Chassis Brace Mod for the Losi SBR 2.0

All the way from the UK, this brace works!!! Links below for this truck, the chassis support, Vitavon parts and anything else I can find for it. Use the links to support Exocaged RC Thanks!!
Chassis support
Ebay ebay.us/RWiDj1
Losi Super Baja Rey 2.0
Amain bit.ly/3wCLyS9 (Yellow)
Amazon amzn.to/36JHqoH (Blue)
Ebay ebay.us/32am9J (Blue)
Horizon bit.ly/3hIBJhi
Vitavon parts on Ebay
Rear Axle Housing ebay.us/bbQG3f
Rear Trailing Arms ebay.us/lXomPV
Transmission Case ebay.us/BPGsVE
Transmission Gear ebay.us/bIutmP
Front Lower Suspension Arms ebay.us/sDkUjX
Front Upper Suspension Arms ebay.us/2QJ41w
Front Shock Tower ebay.us/MPEF3F
Flysky GT5
Amazon amzn.to/3iqsVeO
Ebay ebay.us/HinilG
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

[@seanclarke4061]

Those vitavon fron and rear lower arms look fantastic just bashing around!

[@mikehagquist5198]

Front mud guards is a must. Keeps 80% of dirt/sand out of the chassis. 3d printed. And it acts like a brace in the front flair or fender.

[@rccrawlersmid-wales645]

Love the way that drifts around in the sand... 😍

[@chrispalusak7725]

I've been waiting for this truck getting upgraded.

[@RuisRcAdventures]

Awesome upgrade Joe. I went out bashing with a few friends yesterday, one of then had his Traxxas UDR which is very similar to the Losi. It became a favourite to most of us after we tried it, i can only imagine what that Losi is like.

[@ExocagedRC]

It’s way way bigger.

[@chrispalusak7725]

Wow those a frame arms are massive.

[@daviddunlap5602]

This is the coolest damn rc truck ever

[@seanclarke4061]

We need bigger springs, and thicker fluid now because the body is taking a beating with the extra weight bottoming out the shocks every little bump. I've got them too lol. Flex doesn't seem so bad after running these things a few times

[@slysplasteringsly1012]

Awesome slow mos. That truck rocks

[@seanclarke4061]

Just to hold it over last run, mu buddy who has an sbr2.0 as well came up with just adding some tape to the underside of the wheel wells to stop the tires from rubbing all the paint off

[@Dirtbiker4life]

I posted a pic in the sbr2.0 group on fb under my vitavon gearbox post. They hold up well, i cartwheeled about 30ft and the bent pretty good. Put them in a press to bend them back and are as good as new. Only other thing damaged was a body clip.

[@SURCs]

Perfect upgrade.

[@BIGGBULLxxx]

Wow you got those aluminum parts on it that looks sweet and they work your truck suspension works very well

[@linkinparkfreak101]

I 3D printed mine, yet to test them out, should still allow some flex.

[@bucksrcworld8119]

awesome bash with this beast!!

[@DoubleClutchProductions]

Check your bulkhead at the shock tower for cracking

[@alexberanjia2049]

Awesome spot and great vid 👍🏽

[@DoubleClutchProductions]

First youtuber to actually comment on how the cage is designed to flex to save the 4 link in big crashes. 👍Metal is the wrong choice not to mention it voids your warranty.

[@Gooche]

So plastic braces over aluminum?

[@DoubleClutchProductions]

@@Gooche Just to prove my fact, I have a SBR 2.0 with this brace on it and it completely cracked the bulkhead where the shock tower bolts in.

[@ashleyconnelley556]

That’s awesome

[@Chris18RC]

Nice video my friend 😍😍👍👍

[@ashleyconnelley556]

Nice view

[@allmightygreatone1048]

Can you do a video of how you clean the machines and protect from sand.

[@ExocagedRC]

Well. Water, Simple green and air hose mostly

[@scheers100]

NICE!!!

[@jesseormond3202]

Shovel and a Tamper in your tools and shape it how you like it

[@Hardlines_FullsendRc]

Love my Sbr 2.0. I just installed some of them braces on mine but I went with plastic ones in hope that they give before my chassi. What batteries do you run in yours? I run the powerhobby 8s 7400mah and the truck seems to really like them and lasts a good amount of time,probably 40min of good hard running.

[@ExocagedRC]

Most of the time I use cheap Turnigy 5000mah 4S. I also have some 6000 and 7200’s

[@plegurs]

Have the same truck, absolutely love it. Curious what shock oil do you use, seems to absorb bumps better than mine. And do your shocks leak? Mine leaked a lot before rebuild.

[@ExocagedRC]

Stock oils so far.

[@billcox87]

fantastic video brother, that truck is pretty sick!! If you had to chose one, would it be this truck or the UDR??

[@ExocagedRC]

Well. Both are awesome but this is more of a beast. I’d go with this one.

[@billcox87]

@@ExocagedRC Nice!!!, thanx brotha;)

[@modzilla74]

Try some 100wt shock oil. It helps alot with the bottoming out

[@DoubleClutchProductions]

No

[@josepharrington8080]

Did you use stock hardware to mount those braces ?

[@ashleyconnelley556]

That’s awesome it took that crash lmao

[@fc1133]

I tried searching on google, but nothing came up... Any ideas on how fix the weak braking power!? Thanks.

[@butterybird4987]

How heavy is your ryft with all those metal upgrades?

[@old-rcplane-phart]

#1👍😁

[@wolfguard1180]

Now all it needs a is a suspension like the udr.

[@ExocagedRC]

Well it kinda does.

[@MTCKIE68]

Dude I really think something with the gears are not right somewhere. It shouldn't sound like that.