Cheap And Effective - Analog Load Up To 60 Volts!

Build your own analog load to load up power supplies, drain batteries, limit current, all sorts of things - for VERY cheap!
Get yours here:
0-15V Analog Load: www.pcbway.com/project/sharep...
0-30V Analog Load:
www.pcbway.com/project/sharep...
0-60V Analog Load:
www.pcbway.com/project/sharep...
And you will need these components as well:
H7 Bulbs:
Aliexpress: s.click.aliexpress.com/e/_DDc...
Canada: amzn.to/3VAtSXh
USA & World: amzn.to/49gVcNo
XT60 Connectors:
Aliexpress: s.click.aliexpress.com/e/_DCk...
Canada: amzn.to/3TTOBUB
USA & World: amzn.to/49gqIuT
6.3mm PCB Female Spade:
Aliexpress: s.click.aliexpress.com/e/_DDY...
4-pin 8.25mm pitch terminals:
Aliexpress: s.click.aliexpress.com/e/_Dm9...
M3 Heatset Inserts:
Aliexpress: s.click.aliexpress.com/e/_Dly...
Canada: amzn.to/4aBJZIc
USA & World: amzn.to/4aviXSO
Thanks for watching!
Check out my website: www.simpleelectronics.ca
If you feel like supporting the channel, please consider supporting on Patreon:
/ simpleelectronics
or get some cool merch!
teespring.com/stores/electron...
or buy anything from USA Amazon using my affiliate link:
amzn.to/3Iki6q7
or buy anything from Canadian Amazon using my affiliate link:
amzn.to/3FNxPfI
or buy anything on Banggood's site using my affiliate link:
www.banggood.com/custlink/mGv...
or buy anything using my Aliexpress affiliate link:
s.click.aliexpress.com/e/_9u07X6
and if you feel so inclined, here is my Amazon wish list!
www.amazon.ca/hz/wishlist/ls/...
I have other channels!:
SE-Made-A-Stream:
/ @sestreams
Dan Fixes Cars:
/ @danfixescars
SE Con Dairy:
/ @se-con-dairy
Live Gaming:
/ simpleelectronicsyt
Disclaimer: Some links included in this description are affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!

[@Mtlatc]

Such a bright idea.

[@frankowalker4662]

What an enlightening idea. You're so bright. Brilliant video. (sorry)

[@antibrevity]

Nice solution and perhaps a metal shield or box could be built to contain the light a bit, but ventilation would be important and 3D-printed items would melt or worse. Incandescent lamps are good for this purpose as they radiate most of their energy away from themselves while power resistors are poor radiators... until they get so hot they fail. Julian would approve.

[@AJB2K3]

This is illuminating

[@antibrevity]

7:52. Words of wisdom.

[@onecircuit-as]

Great idea Dan. Load for the lab. 👍😀

[@electro2606]

I made something like this 2 years ago i used h7 car holders and glued them on a little box. In the box are 2 step down units whit 2 potmeters on the outside so i can adjust the voltage. I made a newer version whit a programmable step down module.

[@JonnyBergdahl]

Stop giving my brain new project ideas!

[@uni-byte]

My solution was a bit more expensive, but still pretty cheap.