Cheap Car Challenge £££ Can We Double Our Money ???

Welcome to the Salvage Rebuilds UK Channel. In todays video we try to double our money on a cheap car challenge.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, Reconditioning, Restoration and Structural repairs on the Celette Jig Dozer frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of Cars Vans Motorcycles and vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart Auction bargains, Non Runner and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris #Rebuild
If you would like to see more of the projects we work on please take a look at some of our other videos covering a wide selection of vehicles including Sierra Cosworth, Caterham 7, Mg Midget, Ferrari 360, Range Rover Classic, Range Rover Sport, Range Rover Evoque, Land Rover, Ford, Vauxhall, BMW, Renault, Fiat, Mercedes, MK1 VW Golf GTI , Ransome, Mini, Peugeot, Morris Commercial, Honda Quad Bike, Vans, Trucks, Bikes, Jet Ski, Mowers and More!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is too many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab , Celette Dewalt,Crypton and Sykes-Pickavant.
If you are interested in a specific tool, please put your question in the comments section of the relevant video.
Sealey battery Ratchet :- amzn.to/3kUCvHC
Auto Smart G101 Cleaner :- amzn.to/3qswROe
Merchandise :- www.stadiumsports.co.uk/club-s...
Instagram for daily sneak peeks :- salvagerebu...

[@sruk]

Don’t forget it was easy for us but the clutch job alone from a garage would be 2-300 it did take both of us all day 👍 Wheel Refurb. Dan 07872 190614

[@lollylaunder]

where is the wheel refurb guy based Rob? (I'm in Kent so hopefully not very far from me)

[@sebastianguerre6868]

Is it normal to take the bottom ball joints out on both sides and pull the driveshafts out completely before trying to remove the gearbox. Or do people just take one driveshaft out and then remove the other one as the gearbox slips out?

[@sruk]

@@lollylaunder Sittingbourne 👍

[@sruk]

@@sebastianguerre6868 everyone does it there own way bud 👍

[@matthewc.419]

Hi chris and rob Wicked stuff ....great vid Hay ...me n mate are looking for a vw caddy a small one .......... If you kniw any one or a trader up our way ......perhaps .... Take care guys ........😊😊🙏🙏

[@garypage8852]

As much as the salvage scruff like the Evoke & GLA are fascinating, these quick flips are too, its great to see cars being given a second chance & with the flips we never know what to expect, old, new, manual, auto, petrol or diesel..... Lets see more flips :)

[@petersylvester2905]

There's a 17 year old that will be loving that as a first car somewhere, looks cracking in blue with those wheels!

[@gerardbosvonhohenfels1866]

Well, ages doesn't matter. Everyone will love that car.

[@seanboyle1357]

I wouldn’t worry too much about how your getting the content across, never saw you do a bad video mate so your already doing a brill job 👍🏻👍🏻

[@MediocreHero66]

Good blend of time lapse and 'real' time shots in this one, with the right amount of waffle ;), good video once again!

[@andyrads1096]

Wife was worried that gearbox was going to fall on Rob. I told her, if it had they wouldn’t have uploaded the video. But what if... Chris uploads a short video. Chris sat on a stool in the workshop looking into the camera and says “Welcome to the channel. There’s no video today as Rob is in hospital after a gearbox fell on him. Please like, share and subscribe. Follow us on Instagram for sneak peeks of Rob in hospital.”

[@kingoffifa]

lol!!! brilliant!!! cheers for the giggle!!

[@mancsblue]

Definitely a fan of the live repairs ,keep up the good work boys

[@davidrobson6294]

A good days work, the wheel refurb makes such a huge difference, always money well spent. Great job guys.

[@thefloorkiller]

Excellent video, love these quick flips and the details of the jobs

[@Stevo8013]

Really like the no time lapse it showed the amount of teamwork between you another great video guys 👍

[@petemoring67]

YEP!! .... Live Bits much better than Time-Lapse :-)

[@dobbo4596]

This is my go to channel right now, cant get enough..real cars real people

[@michaelmurray860]

Highlight of my week when a new project comes on. Keep up the great work inspiring all us DIY mechanics. Best wishes from Oz.

[@ra52]

Chris where you been the videos now with you in them more just bought a smashing channel to new level two nice guys doing there thing keep it up lads

[@Rockape501]

Another great video Rob. Would love to see more of these quick flip challenges :)

[@Elvo7684]

Throughout the lockdown, me and my young lad have loved watching your videos, over weekend we both like to get out and tinker with my old van and pretend we're you, the Salvage Rebuilds guys, he likes to be the quiet cool one and I have to be the one who doesn't shut up! Only joking! We're big fans. Thanks for the happy memories guys👍

[@101sjhurst]

Yes, like the live stuff, it’s good to see you working on stuff and learning about it. I like these quick flip videos.

[@miketowler322]

More of this would be great, I like work, I sit and watch it all the time🥴

[@kit131179]

How good is this video.... love the quick flips, completely understand you don’t wish to do same in every video. Currently you have a great mix, just keep these coming... the Live video is great also ! Not a time lapse fan, it’s a tough one to balance ! Keep it up and all the best to the two of you.

[@scott02464]

It’s a thumbs up to the live bits from me mate, great to watch 👍

[@JemTheWire]

I actually just stumbled upon you channel and was immediately addicted. Really easy to watch and you don’t BS, just say how it is. I am learning lots.

[@Mark...]

What would be good is if yous done a “how to” like once a week pick something to focus on and show a bit more detail, like how to change brake pads, how to service a car, how to change exhaust etc etc. 👍

[@mikeclifton7778]

Excellent video, keep them coming exactly as they are, the mixture is about right, thanks.

[@peterlane1510]

I found this very interesting as I did the same job on granddaughters car. She was quoted £500 at the local garage. I am a home diy mechanic so followed the haynes manual. Battery box & bumper off, both driveshafts removed etc etc. You made it look so easy👍 1 second ago

[@davidkenning9939]

Easy flip. Great to watch the clutch being changed. Bargain car for someone

[@rickychopper]

If Ray Winstone did car repairs this would be what exactly it would be like.

[@rapitupthatsarap6681]

What....Sweeney Todd....slashing...the price of car repairs....or because.. "He's the daddy!" at it lol

[@vintage4941]

I remember Ray Winstone in minder filling a wing for Arthur with mud which promptly seeded through the paint....Classic!

[@matthewcoggins7288]

I bet they could knock dints out with a snooker ball in a sock

[@DazGeary]

Absolutely, if you get creative with your camera angles, those live shots are worth their weight in gold for giving us plebs some good advice. Changing that clutch looked a sinch.

[@elizabethmaybrown6715]

The live filming on this one is really good, nice first car for someone now, can't imagine that one hanging about for long! Well done to you both

[@ewanstewart8011]

I obviously can’t speak for new viewers but your personality comes across as being honest and jovial Rob, don’t be putting yourself down, by worrying about speaking with your hands, you and Chris have a great channel here so just keep doing what you’re doing and making enough money to keep your wives happy 🤔😆👍🏻

[@nudgenudgewinkwink3212]

Cheers rob and chris love seeing cheap bargain motors given a bit of tlc and back on the road where they should be, Cars like these are a godsend for people on low incomes who have to drive and new drivers too.

[@tomsmith6741]

I reckon the live/time lapse mix is about right recently Rob 👍🏻

[@ianberry1713]

Cracking video guys. I’d certainly be happy seeing more ‘flipping’ vids. Some first time driver is going to get a lovely little car.

[@marktaylor4013]

Thank you for everything that you guys do do the live footage is fantastic and those of us that can only dream of attempting the mechanical repairs that you guys crack on with it is thoroughly entertaining it's like watching wheeler dealer but you two are the real guys and we love the close-up mechanics

[@rbcleaningskegness9191]

Love the live parts and the quick flip stuff Rob and Chris 👍🏻

[@boulting1]

Rob, stick a Go Pro on your head so we can get right in on the action. :-)

[@DB71170]

Go the whole hog....miners helmet 😆😆

[@richardhaywoodh]

Good idea

[@davidtester8519]

Great job, really interesting to see this sort of work being done, gives me an idea of the complexities of it all.

[@fizzyelectricity]

A Go Pro with a mag base would be awesome for the real time sections, you could clip the camera anywhere, and if you had two, you edit between the two from different angles 😀

[@davidbowen9492]

Great video again, just love watching them, giving me some inspiration to try some of these small jobs on my car, thanks again

[@Antswann]

Binge watching your channel. This has taken over for me, where wheeler dealer left off, well, when Edd China left off. Great hosting and editing, you do always worry about the wind sound, do you not use a fluffy microphone? They are pretty good I've heard.

[@DavidSmith-es5kw]

I was only thinking last week this is the new wheeler dealers just better.

[@MichaelHall-dn5ms]

Find it so fascinating watching you two lads flip cars. I'm an apprentice gas engineer, I have just got my gas safe at the age of 20, but always been into doing something like yourselves since I was a kid. Good work lads.

[@dermotmurphy7109]

Good video again showing both of u working together, gonna be a cracking little car for someone that, good little flip it came up really nice too, another good job lads 👍👍

[@Waykuh]

Love seeing these cheapies in between the higher ends rob mate looking forward to that gla work👍

[@sethduval8644]

There must be something sad about my life Rob, just got in from a filthy day in my paint shop. First thing I do after I walk in the door still in me overalls is sit down have a glass of wine and see if you’ve got a new video posted up. You are addictive mate, keep up the great work, kind regards, Seth, in suffolk 👍p.s you both keep a tidy wkshop ( I can’t stand to work in a mess 😂👍👍)

[@sruk]

Cheers bud appreciate it 👍

[@paullevy561]

The wheels do set it off. Price it out a little more than double; you know someone will use the small imperfections to negotiate the price down. It's worth every penny you'll ask for it. Well done.

[@davidscott9531]

Excellent content really enjoyed it today more of them would be good cracking little cheap car

[@NB_NB_NB]

I always want to buy the car once you've sorted it, even though I don't need one LOL

[@richards4456]

Not bad cars to work on these. Great car for someone, 1.2 petrols are bombproof.

[@martincowie4277]

Really enjoyed the quick turnaround. More please. 👍

[@chrisrogers2848]

Definitely keep going with the live sections - great to watch! Thanks guys

[@simonbarton6599]

Loving the live bits . Amazing content as always . Would love to have seen how Chris cleaned the spline .

[@TheFacilitiesOfficer]

That looks mint, another great video :)

[@stevesrepairs5778]

Thanks Rob keep doing what you do, your judgement on what to do with time lapse is good. Take care and all the best. Stevie

[@garrywhitehurst5764]

Enjoying the real time footage. Good to see the professionals struggling a bit!

[@iainf]

I don’t do a lot but done one of these recently, on the ground. Had a bit head scratcher as the clutch release pipe wouldn’t sit in housing properly with the new one but would with the old one. We had new clutches in & out till we got it figured. Not a bad job to do on the ground tbh.

[@Saint_Vincent1735]

Let's get involved 🙂

[@73henny]

Love these quick flip videos. The fast turnaround crash repairs or non running cars like this are your USP. Keep them coming.

[@englishmaninengland4591]

Another awesome vid. We love you Rob & Chris. I love the fact you’re so honest with all of the builds.

[@sammytheseal2307]

My vote for more of the live real time footage instead of time lapse is a yes 👍👍😁

[@acorndogs904]

Totally agree Sammy

[@sammytheseal2307]

@@acorndogs904 Ah haven't seen you about in the comments the last couple of videos, wondered where you went 😁 All I saw was that Muppet copying you saying "let's go" 🙄🤦

[@acorndogs904]

@@sammytheseal2307 I've been watching and commenting Getting over a bad dose of man flu To much snow here so the good old WiFi isn't so good

[@sammytheseal2307]

@@acorndogs904 I see buddy 👍

[@sim6699]

Who remember paying £50 for a cheap run around with little MOT?

[@davidtrice8307]

My first car a A reg fiesta in 1995 paid 200 had it for 2years

[@MrCalibra32]

Bought a mk5 cortina £50 fixed it up put twin webber on it got 120mph out of it had it 3 year sold it for profit ,them was the days

[@haydenuk02]

Great work Rob and Chris. Keep it up and thanks for sharing this with us take care and have a nice week

[@rubbersteve123]

Your live bits gives everyone the feel of how hard it can be to repair motors, so well done, loving it, here in Bonny Scotland.

[@paulkidd4443]

What a great cheap 1st car ! Excellent content as usual

[@AdventuresinaMorris]

Liking the "real time" sections, and hearing the two of you talking to each other.

[@jackmillin]

Really good the live bits seeing the little details. I was thinking that's going be a right sod get back in if it's that tricky get out. Top upload again 😎😎👍👍👌👌

[@kevat310]

Great job! Love the cheap car challenge and van videos. Keep them coming. The amount of live vs time lapse like in this video is a perfect mix. No need to apologize for the noise at the beginning. That's the sound of work, which is what your channel is all about. Keep up the good (noisy LOL!) work, guys!

[@TheBobo377]

You two need a "Non Swearing Medal"....

[@PaulSheeran242]

This reminds me of old school wheeler dealers 😃

[@markb7346]

Yes, keep doing the in-depth videos. Great to see all the detail, the problems you come across and how you deal with them. Looking forward to watching many more videos to come.

[@barrynaylor183]

Great video as ever, I liked the real time doing the gearbox learnt a bit other than it being on time lapse, hope it sells for you

[@brucenichols9206]

Dent in the rocker is probably from a poor choice on where to put a jack

[@ferglesnerk]

My mate (sadly passed away) had a Clio. Not sure what year it was but it looked like yours and went like the boody clappers! They sure do win some traffic light races these things. Sound kinda sporty to. Great little fix'em up job, guys.

[@bobbyaxelrod5016]

Firstly - GREAT to see Chris getting involved on camera. Absolutely loved this video. It shows the real world struggles of bits that get stuck or are awkward to remove, sick of watching TV programmes or other you tube videos where everything comes apart as if by magic. Real is best. mechanics most helpful piece of kit - THE CAR LIFT More please!

[@robertfraser1517]

Really like seeing the walkthroughs in full rather than the time lapse!

[@robbieleitch8649]

Ha ha! Never thought I’d see my car again! Bought that new in 2011, sold it in 2014”

[@gc5384]

Small world

[@nathanbartlett3839]

Love these little quick flip cheapies, makes for great viewing and a few quid on your pocket 👍

[@mattmpower5977]

I like the live bits ,gives it realism and to see a project turned around in one vid is great ,always excited when another vid drops ,keep up the good work !!!

[@bear1245]

Is this the place they serve the best waffle in town 🧇 🚗 🔧

[@sruk]

The best 👍

[@stanbest3743]

@@sruk Certainly plenty of it :-) Anyone would think you have changed a clutch before!

[@rustynail36]

My mate does mobile clutches on customers driveways by himself. Any clutch he will do it. You can imagine the size of his arms and shoulders laying on his back lifting them in and out.

[@brianallen858]

Perfect little car for a new learner, Rob and Chris, the superheroes of recycling...👍👍

[@dangerranger-in3kl]

Love these quick flip videos rob , .... never get bored of them .. Wheeler dealers has had the same format for basically 20 years and it’s still going strong, , would be good for an instructional video of when your cleaning an engine bay , the places to clean and the places to avoid , ... cheers 👍

[@MaverickTopG]

Loving the live videos to show some of the detail (and the challenges faced), great job guys 👍

[@Yourballix]

Love the cheap turn arounds 👌

[@pushinglimits3285]

Love this kind of video.! Really do, you guys are smashing it at the moment.! Not forgetting Chris of course.!

[@wombatsyoutube]

Love how there's always a cup of coffee perched somewhere close as you're working. Man of my own heart! 😀😀😀 Brilliant video again guys, keep em coming! 👍👍👍

[@theteacaddy2766]

Thanks for another easy to fix, cheap car quick flip video. Really enjoy watching the rebuilds on bread and butter models. Massive thanks for including where possible live footage makes it more interesting.

[@fookdatchit4245]

Adding value to the channel, adding value to the business. You two have talent by the bucket loads. Great flip. Thank you for the entertainment.

[@dansmith5449]

Brilliant content as per usual mate! I study automotive engineering at university, and you guys have gave me the inspiration I needed to finished my project car!

[@BritishBoy1971]

The camera angles/footage of the clutch change was spot on and it was all well explained, as usual. Thank you! 🙂👍

[@trishhartland5156]

What an awesome little car Again someone is getting a bargain absolutely brilliant video really enjoyed it

[@johnboy384]

Help for Heroes Sticker. Awesome!

[@chip1pan]

Big well done rob and Chris another entertaining video. Car looks amazing and I found it unbelievable that you got a clutch removed and new one fitted in a day. 👍👍👍

[@michaelbird8630]

A clutch on one of them I would of thought 3 hours, start to finish.

[@dave-huston-dublin]

Great turnaround, Love when you get something like this, Well done.

[@SA-yb7mt]

'The postman still calls round does he?' Haha! Couldn't help it. Great video fellas.

[@ianatkinson8464]

It always good to see you working on the cars live and explaining what you are doing👍

[@al.f.8204]

Another brilliant turnaround. Very nice looking car and I like the addition of the live video clips. Another job well done. Stay safe Gents, Cheers 👍🏽🙂

[@richarddecoster4464]

These videos are great for watching and definitely do more of them, I really like the variety of the projects 😀

[@sodig876]

Great video Rob & Chris 👍 I like these quick turnarounds, all your knowledge and experience really shows.

[@frankjames7247]

Yes I like the live bits, you seem to present it all well.

[@kevinshepherd2917]

Enjoy watching it live. Would like to watch more quick flips. Cracking job.

[@davidhughes1634]

Great wk as always Rob nChris,im liking the live part of the video it make us fill more involved.