We Bought A Copart Salvage Peugeot Non Runner Gamble ???

RexQ.com. bit.ly/3xyIKpY
Topdon diagnostic tool amzn.to/3zMfdei
Sealey cordless 3/8'' ratchet amzn.to/3wCAOni
SRUK Merchandise :- www.stadiumsports.co.uk/club-s...
Instagram for daily sneak peeks :- salvagerebu...
Welcome to the Salvage Rebuilds UK channel. In this video we take a gamble on a non runner Peugeot 108 from Copart salvage auction, Will it run?
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Fail, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab and Sykes-Pickavant.
If you are interested in a specific tool, please put your question in the comments section of the relevant video

[@robb236]

it was driving alright when it crashed ........ love it

[@sammytheseal2307]

Titanic was fine before it sank!!

[@stevenking2946]

Never a more honest word said....

[@ftangftang1111]

Classic Rob !

[@minortinkering]

….. did say something about the brakes not working too good though 🤣🤣

[@rsoppy735]

That's like the painter says you can't look at both sides at the same time

[@111midman]

Love the way you gave a heads up about Rexq for free, unsponsered..Nice touch from a couple of genuine guys

[@sruk]

Just thought it was a good idea 👍

[@Tuck7117]

Love how Rob is always happy give a new business venture a bit of shine. Good bloke 👍

[@googlecontrolled]

20.50 What a classic line..." Im sure it's ok,it was driving alright before it crashed". A line that rivals the punctured tyre that is "only flat at the bottom"..🤣

[@highmilitiagilligilliatt2508]

Love a good roam around a scrapyard,one of my earliest childhood memories is climbing around looking for parts with the old man. No health & safety back in the early 70s. Never a dull moment guys❤️it.top channel by far 👍

[@lawrencehardwick7250]

Probably been said already. But 108, C1 and Aygo are basically the same car. Built in the same factory in the Czech Republic. TPCA. Just a few cosmetic differences. The model you have is the 2014 onwards platform. Great video again, by the way 👍

[@TheDaf95xf]

Rob your commentary is top class and Chris is a genius 🤣 Mooching scrap yards is a nice touch guys 👍🏻 Cheers Stevie 😎

[@johnedwards3198]

I loved the scrapyard piece and also the hiccups being left in 😄

[@leccybadger]

'it was driving alright when it crashed'. Quote of the day goes to Rob 🤣👍🏻💯

[@kwakgreen]

I pi**ed myself laughing when Rob came out with that comment😂😂😂😂😂😂😂.

[@richardadriver]

Three city cars from three manufacturers built on the same platform at the same Czech factory. About 70 per cent of the new Toyota Aygo, Citroen C1 and Peugeot 108 are identical, including bodyshell, engines and gearbox. Only the finishing design touches differ.

[@acorndogs904]

Next door is factory for skoda audi and VW. Czech has most of the market tied up. Wages are shit though Work a 10 hour shift 2 hour travel each way although the travel is provided 5 days a week for a little more than the equivalent of £850 a month

[@jimn10jn79]

The Peugeot 108 is the same as a C1 mk2 (post 2014) and the Aygo post 2014. The 999cc engine common to them all is a Toyota engine but the Peugeot and Citroen can have a 1.2 Flairtech engine. Although a redesign of the original Aygo, 107, and C1, many parts are common such as some of the running gear. If the one you have is 999cc petrol, it’s the same engine as used in the early model so the parts like the radiator are probably the same.

[@philtucker1224]

Rob & Chris, thanks for another really interesting video. - I love you repairing the little runabouts because I know it’s going to bring a lot of pleasure to a youngster or new driver sometime very soon. - so economical and cheaper to ensure too! Nice job boys 👍😊

[@anthonyhopkins984]

Hey Rob, the C1, 108 and Aygo cars are all built in the same factory. All 3 have the same engine etc. The only differences are some styling tweaks 👍🏻

[@trevorjarvis3021]

Another brilliant vid Rob, loved the visit to Kent Auto Salvage. It’s also interesting reading through all the comments, it is amazing what information you can pick up. - I don’t even repair or work on cars, but there’s always something to learn!! - Great content guys!

[@michaelhynds8035]

Always interesting. Genius with the fuel pump. I look forward to the rest in this series. Thank you for sharing. Have a lovely weekend.

[@mtickner]

I miss the days of rummaging in breakers back when I was younger hunting for parts to upgrade the cars I had. 👍

[@petebird7171]

“It was driving alright when it crashed” 😂😂😂, nice video, could be a nice earner 👍👍👍👍👍👍

[@carlevason237]

Rob stop apologising your videos are brilliant another project to do and looking forward to seeing the finish jobs on both the camper and the Peugeot 👍

[@kevinball2517]

Always look forward to your Friday blog it sets me up for the weekend cheers you two 👍🏼

[@alancutler2686]

Hi Rob and Chris, Another great video, thanks. Re the Sealey rachet wrench, got one and very handy little tool. Also got the matching 3/8 impact wrench that is even handier for removing smaller fasteners, on body panels, undershields, rocker covers, etc, not too aggressive, but powerful enough and very comfortable to use. Got most of the Sealey 12 volt range of tools and can thoroughly recommend them. Good luck lads.

[@talksr]

You often see these fixed to the back of bigger campers so you can nip about once you have got to where you want at a camp site rather than using the camper. You are becoming a real man of leisure Rob what with the jetski and now this! These are lovely little motors. Not great content for you guys, but if you ever get one of these, C1 or Aygo 2014+ with a/c, I would love to buy one even if the doors are dented and scratched. Just want one for running back and fourth.

[@brianohagan2157]

I liked your comment rob “it drove ok when it crashed” you should get that on a t-shirt. All the best to you and Chris, Iam away to watch Scotland get beat 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@marksmithard7801]

🤣🤣🤣I’m going to watching 🏴󠁧󠁢󠁥󠁮󠁧󠁿 beat you Scots. I hope I don’t regret this comment later. I will take the flak from you if I do. Enjoy whatever the result 👍

[@mikecraney6571]

Loved that comment , absolutely spot on lol

[@peugeotdudeandson4485]

RexQ what a good idea that is. I don't have cover for brakedown but I'll definitely be downloading that app. Thank you for bringing this to our attention boys

[@sruk]

👍

[@colmart1973]

Great job guys, loved the diagnostic work on fuel pump👍

[@1mic3]

Always a pleasure to watch, great video again, really entertaining. Hope you both have a great weekend 👍👍👍👍

[@paulrixon1644]

Another great video. Will be a lovely little runabout when you have finished it!

[@pauljohnson4871]

Love watching you guys. I’m fairly new to the channel and faciinated by what you do. From finding the right car repairing it then selling it

[@alextripp1230]

Hi Rob and Chris, nice new project guy's, looking forward to following this.. cheers, Alex.

[@jonnygigs21]

Another great video Rob & Chris! Looking forward to the next one! 👌🏻

[@rlk67]

Like always almost... very nice video guys ! Never boring to look at even when short.... take that in the pocket ! Keep posting them please, have a good weekend !👌😎

[@brianallen858]

Enjoyed the video Rob and Chris thanks guys 👍👍👍

[@kevinthomas1259]

Some great diagnosis to get it started very methodical. Will be interested to what you can get in the way of parts considering there are 3 brands of car all built in the same place. Looking forward to seeing the next part when you have found the parts.

[@roystonvehicles9129]

I always used to say the same about write offs they were usually nice cars prior to the crash,another great video rob and Chris you definitely lead the you tube car channels

[@sruk]

Thank you 👍

[@paulmartin4971]

Hi Rob and Chris great video and another great project to keep us involved. Can't wait for next exciting episode thanks

[@trainmanbob]

This looks good!! You mentioning interchangable bits reminds me of 52 years ago. As a lad I worked in a garage with an old dude. He was working on a Silver Shadow Roller and I was removing a starter motor from if I remember a MK1 Fraud Cortina. We both arrived at the workbench carrying a starter motor from each car. The old dude grabbed the Fraud part, put it along side the Roller part and guess what?...Identical. Only difference was the RR sticker on it. Roller part was a couple of hundred quid and the Cortina one was about a tenner. Tried and tested on the relevant equipment at the local Lucas centre proved both items were identical. Bonus time!!!! Cheers, Bob

[@TheSamuel439]

I love how Chris has become less camera shy and is getting involved, great work guys!

[@davharding5738]

another job well done Chris, a good little earner there, hope all goes well for the rest of repairs.

[@garywilson1821]

We rebuilt one of them earlier this year managed to get all the bits in colour .sold it the first day it was advertised

[@FordMatt647]

Great problem solving Chris you two guys keep up the great work

[@andy_v4443]

Always check the last fuse first 😳😳😳😳😳🙃🙃🙃😳😳😳 Great video guys 👍👍👍👍👍

[@adrianriley780]

Will be a good first car for a new driver,nice little motor easy rebuild for you two motor magicians.👌👌

[@chip1pan]

Another Great video rob and Chris. Loving the subtitles lol. That engine sound very nice when running. Enjoy your weekend guys 👍👍👍👍👍

[@colinnewlands743]

Really enjoyed this one. Really interesting about the shared parts.

[@kevinenlund3004]

Enjoy all of your videos. From Kevin located in Georgia, USA. Keep up the great work!

[@jameshunterford4099]

Another great video. It’s so interesting to see your process from bid to repairs. Plus, wang it out is so funny 😆

[@darrenfox9769]

Mate - another brilliant vid and I look forward to every single one!

[@sheepdogman1]

Lovely video yet again. Don’t know how you both do it time and time again.

[@stephenfarrow368]

Good vid guys,looking forward to this project

[@GaryGSF]

The C1, 107/108 and the Aygo are a joint venture and are built in a factory in Czech Republic. Nice little car. Looking forward to seeing this one done.

[@johnstokes3144]

Another great video. Really interesting seeing the interchangeable parts on different cars. 😊

[@martindaredare]

Great video rob, and a nice little project to sort out . All the best Martin 👍

[@dagenhamdave2611]

Great video yet again lads Chris is not only an engineer but a true all rounder Watched it Justin time before the England game

[@bernehalligan]

another outstanding gig lad,s well done....

[@jonathonknight9275]

Great result getting it started more top work👍😎

[@kevat310]

Another great vid, guys. Love the t-shirt BTW!

[@dellboy1419]

Love Toyotas for their inter-changeable parts.....have a 2005 Avensis with a '09 Yaris w washer pump and a '03 RAV4 starter. ..and the Citroen and Peugeot cars are very similar. Great video once again.

[@icyvg4804]

I haven't watch your videos in a while and now you have 181k subs. Congrats man keep it up!

[@kashhameed3067]

Great video as per usual, I’m actually rebuilding the front end on a Citroen C1 2015 which is a similar car, can’t wait to see you do this and then I’ll tackle mine too 👌🏼

[@peterjones6733]

Good length, good content. Interesting sky while loading at co parts. Interesting Uber type service from REXQ (Caribbean for Rescue...?) Interesting scrap yard. All good stuff.

[@julianowens4071]

I love your videos, by far my favourite on KZbin,thank you You’ve actually inspired me to strip down the washing machine and replace the pump and motor bushes.not a car I know but very similar to a Tesla model 3 lol

[@sruk]

Lol 👌👍

[@dannyandrews8930]

Thank you for another fantastic video, i really look forward to your videos every week. No doubt this will be another lovley little car.

[@paulhardy2014]

Looking forward to another great repair 👍👍👍

[@SchteveZodiac]

Great stuff, as is most of your content, it's your personality and Chris's knowledge that makes the difference (looks as if Chris is content to you fronting it and leaving it to him to do the dirty work lol) In either case have learnt quite a bit on cars and mechanics from the pair of you. The only suggestion I can give to improve it but it wouldn't be possible is when putting up time lapse sections use the music from the end titles from any Benny Hill show, (you know, when he gets chased round by a crowd of people who want to sort him out lol) it'd sure to raise a few smiles, copyright sinks that idea I'm sure!

[@johncouriermeh]

Nice vid Rob. I think you are onto a winner with this one.

[@mariohughes2289]

The perfect way to start the weekend cracking video lads. Have a great weekend you & yours.

[@johndavey72]

Another little gem boys ! A bonus if you could get the panels in the same colour ! I would guess it may not need the jig but l'm sure you'll do what ever it takes . Thanks Guys

[@derricktaffman3887]

Good video, looking forward to when you do the next part.

[@stevenjones19-m8i]

Hi Rob, another car to work on,you and Chris will make this car brilliant again.cant wait to see the progress on this Peugeot 108.

[@skodakatie7341]

It’s a cute little car, can’t wait to see it after you two guys have worked your magic!!❤️.

[@johngoodall7097]

Rob and Chris this is a good little project and Tobit down the salvage yard was interesting too, a lot of broken bits for such a light impact just shows you what so much reliance on plastics and lighter metals will be responsible for extra work in the long run, but as usual you will get there and we will be watching 👍👍👍🚘🚘🚘

[@michaelhunt2369]

another exciting project on the way, looking forward to next vid already

[@brimplas1]

Love your joy at it starting rob... 😊

[@Alexander_l322]

Lovely little car once done it will be a superb run around 👍🏼

[@arweldavies8438]

Just to clarify what people are saying. Yes, the 108, C1 and Aygo are the same underneath. However, the 108 the lads have here is a facelift version and the Aygo in Kent Auto Salvage was a pre facelift, older version. Not so sure everything off the older model will fit the newer one but worth checking to save some £££ 👍🏻

[@rbcleaningskegness9191]

Great video Rob and Chris. All 3 cars are made in the same factory. Have a great weekend guys

[@ewanstewart8011]

Great video ends the week on a high and I bloody need one 👍🏻

[@neilfairless4589]

Rob, great little car. They are identical underneath, basically all toyotas with different ligths for the C1 and Pug. Not sure on body panels because of the lights but when i have the wifes C1 serviced, my garage say they are all the same. They use a very specific oil though because of the 3 cylinders.

[@davidsjenkins281]

hi guys great video you guys are the best and ive enjoyed all the video and I also like working on cars and chris is the best and it makes me so happy when I watch your videos keep up with the good work

[@adierob1]

Your bang on rob the Peugeot Citroen Toyota share the same parts under the bonnet just the outer body panels are different and the inside trim level. Great video looking forward to the next one on this car.

[@astonman4]

Rob: Why don't you do what you've done in the past and get the car on the back of the truck and take it back with you, so you can do a side-by-side comparison and then take what you need and return the rest of the Aygo back to the salvage yard. Best of all for the internals, they're 'in colour'....! Whilst you're there, as the Toyota Aygo / Pug 108 and C1 are basically the same car - bar the panels (like you said) - why don't you get the fuses too?

[@Ro32da72]

Your ought to be on commission for the ratchets - I bought one after watching you use it, and it's a good tool. Great little car too, I ran a Citroen C1 for 100k miles and it was small and noisy, but brilliantly reliable and ran for buttons.

[@dwinterx]

I had a Peugeot 107 not long after they first came out. As others have mentioned it was the same car essentially as the C1 and Toyota Aygo. Back in the day they were all built in one factory in the Czech Republic from what I remember. Also the engine which I believe won some awards for its size and lightness was derived from a Daihatsu engine, who were owned by Toyota. Wouldn't surprise me if most of the parts are Toyota really. Great video as usual, keep up the good work

[@maidiac4607]

And the 107/8 and C1 are the most reliable cars PSA Peugeot Citroën ever sold, as most of the important things are from Toyota…

[@ryanfrench2000]

Looks like it will be a nice car when rebuilt Rob and Chris look forward to seeing the next video 👌👍

[@markfoden765]

Great video as always guys even if a little short but still great,have a great weekend guys👍

[@MB-zm8lc]

Rob your such an honest guy😁. I cleaned out all the fiat 500 parts😂. I like them as well, I don't know why just Italian style? We learn something new everyday mate👍 I always enjoy you and Chris. So it's a 👍

[@johnhill3087]

Great. Video guys love watching them

[@johnpells5992]

Great video guys ,nice little job funny how the Toyota shares parts 👌👍👍👍👍👍

[@amnakhan1606]

Good

[@billhutton7766]

After a bad few days at work so nice to chill out on Friday & watch this new project .Should make a nice first car for someone.Hope your watching England play tonight 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@neilstokescvwshrewsbury7939]

Thank-You, Rob & Chris, every video you put out is somehow better than the last, You are too hard-working guys but still find the time to edit a video three times a week. Cheers Both, so look forward to your content .. 🙏

[@nickmackenzie703]

Nice job rob and chris on the new project.

[@chriswilkes5938]

Great video, Rob and Chris.

[@barrywood5357]

I worked on the fiesta line at Dagenham and the mazda 121 was built on that line in amongst the fiestas

[@andrewsharp4753]

Nice little vid and project guys,peace from the Barnsley massive q.

[@chauffeursvip6110]

Done a fair few of these pugs and would recommend getting the mechanical parts from the same model 108 or a 2014 on mk2 aygo or mk2 c1, the part numbers are different on the alternator, it has a revised denso alternator, you will deffo have problems with the lambda sensor as with the earlier mk1 variants eml it will clear at first but engine light will come back on after a short drive, rads are the same but the fan part number is different so would advise to just change the fan, the front panel buy new from toyota as comes complete with the bottom part for only around £60 ish not worth the hassle of chopping removing spot welds etc, the front door colour code is same as the mk2 aygo so will go straight on if you get red, all you will need to change is the wing mirror as its not electric on the 108, the c1 front door has a black line trim and i wouldnt get that, not sure if ive missed anything else, good luck with the build

[@MrRibboy]

Nice one guys a good little repair

[@Grum_P_Oldman]

"It's buzzing". Just like Rob when it fires up 😂 great video as always guys.

[@wilkesie2011]

Nice video.... if I remember rightly that car also shares parts with the Citroën c1 as well as the Toyota as they are all made in the same factory hope that helps

[@ianday5583]

Cool vid guys. Love these rebuilds. Noice!

[@essex__rider]

What a lovely little Friday vid. Have a good weekend guys!

[@roypowell3450]

Super job guys, you must be shareholders in Kent Auto's. Enjoy your weekend!

[@cornishrider]

Rob "it was ok before it crashed" that would make a great next T-shirt slogan!