Cheap free flight toy to RC airplane - Building and maiden flight video - chuck glider rc conversion

[@GroundControlRC]

Very nice project Marko! Those converted Chuck Gliders are an absolute blast and nearly indestructible ;-) See you in the Air!

[@MarkoRoolaid]

thank you

[@shogunemperor]

This is brilliant bruh!! Love that motor mount!!!!

[@pooljunki1]

Wow you have a lot of interesting stuff, this thing rips

[@ВалерийЯкушин-ъ3й]

You're good. The model is made beautifully. You fly super.

[@FlyMIfYouGotM]

Nice conversion! I have been curious as to why no one seems to have cut the rudder off and reconfigured the horizontal stab into a "V" tail and use taileron control for the elevator and aileron. Radio mixing aside, this would seem simpler, slightly lighter and less drag if it would work. I may need to try this just to see if it works.

[@stevoislookingforgolfballs]

If you do this a top mounted ducted fan would be cool

[@quentinbush]

After the time it took to modify, I bet you enjoyed the challenge. Heck it goes like stink. Well done.

[@GrandadIsAnOldMan]

Great modification 😁👍

[@zero00tolerance]

Hello Marko this is great ! i have the same plane, will attempt to build it like yours but not close to your level. Love the fast build video however 1 suggestion is to slow down on the finished part, we would like to enjoy your beautiful work and see how you build it close up. New sub from me sir !

[@MarkoRoolaid]

Thanks

[@flightdirection8122]

Nice, I actually started with a sports cub s2 but then lost it in the wind and so now I’m looking at the citation longitude jet

[@Aviationandmore747fan]

You have so much time on your hands to make it an rc plane

[@MarkoRoolaid]

Hello. We all have exactly the same amount of time. The main thing is still that there is a great interest in RC airplanes

[@ВалерийЯкушин-ъ3й]

Speed and aerobatics are top class.

[@gcjuan23]

Do you remember the thickness and type of wood used for the ailerons and elevator? Do you remember the CG of the model? And can you share the motor mount for laser cutting? I want to make one like that. Thank you very much. That plane is great.

[@MarkoRoolaid]

Aileron and elevator were made of 2mm balsa. CG- 1/3 of the leading edge of the wing. Unfortunately, there is no motor mount drawings

[@bogdog999]

Nice work, and interesting solution to locating the motor. I have considered doing a pusher version of one of these gliders. Modding is where the real fun is. Happy flying!

[@MarkoRoolaid]

Thank you very much

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@tomrammel]

Nice work Marko, I also built a ducted fan model airplane from a free flight toy airplane.

[@RamoLasiaf]

Excellent - Build. Instructions. Flying. 👍👍👍 Thanks admin. Thanks all

[@MarkoRoolaid]

Thank you

[@Spirit612]

Nice work, but you left out the controller in your parts listing links. Also, I didn't see you check the CG on it - looks a little front heavy.

[@darrin_gunderson]

super clean build.

[@MarkoRoolaid]

Thak you very much

[@musharrafhanif]

A very nice conversion. Can you please tell me the thickness of the balsa wood used for the ailerons and elevator? Also, what material is the motor mount made off (type and thickness)?

[@MarkoRoolaid]

Hi, ailerons and elevator- 2mm balsa, motor mount 1mm plywood

[@jgme627]

👍👍👍😁 Awesome bro.

[@MarkoRoolaid]

thanks

[@THROTTLEPOWER]

Very cool, thanks for sharing........👍👍👍

[@ErPirataRc]

Nice video my friend👍

[@Владимир-ч5т1щ]

Расскажите пожалуйста, как Вы выпрямляли консоли крыла?

[@RcAircraft]

Great motor-fication 😁

[@theBodger]

Excellent I got 3 to modify ❤️

[@MarkoRoolaid]

very good, after be sure to share your own solution, interesting to watch

[@theBodger]

@@MarkoRoolaid yes it will have a front mounted prop and I have a set of u/c from an old model. Trying to make a slower flyer to use on a Cricket pitch.

[@theBodger]

Just uploaded short video on my channel, 👍not flown yet though,

[@EMTAx]

Very good video. You must have a good camera man. Try to keep it more in focus tho.

[@mrsmith4662]

A job well done and neater than putting a prop on the nose.

[@MarkoRoolaid]

thank you

[@fpvlangy6931]

great job !!👌👏 😍

[@viktorlunge1280]

Сейчас строю як 130 под 70 мм импелера. В планах еще построить мига- вот только файлы с сайта rconen не получается скачать просит разрешение на скачивание .

[@ЭкспертВСЕХЭКСПЕРТОВ]

Лучшее что я вилел. Браво! Буду повторять.

[@MarkoRoolaid]

Большое спасибо

[@Rturrito]

Saw a stupid reaction video to this before finding the original. Gonna build one too soon

[@rcawed3793]

really cool airplane

[@MarkoRoolaid]

thank you

[@martinengelbrecht8061]

Is there a slowed down version of the build where I can see some more detail of what you're doing?

[@MarkoRoolaid]

Unfortunately, it is not

[@martinengelbrecht8061]

Are you able to post somewhere the positioning of your various components? My son has asked me to help him build one of these. Your video is of the sort I have purchased parts for.

[@raiyanbashir1877]

I was finding exact this video!! exact this one

[@RSTSamodelkin]

Cool, I want one too!

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@jeremyoshea7941]

I have to do my homework I’m building these all the items are really hard to get right now is there any other propeller that will work that’s well made? Thank you for your time

[@MarkoRoolaid]

Hello. This is such an easy and creative project that there are no rules. I made it myself using what I found in the workshop. So good experimenting, you can do it

[@pscreativity9317]

Same as me bro but yours is better

[@anmolkumar6704]

Can you find how much does this glider wieght originally?

[@MarkoRoolaid]

Hi- 40g

[@anmolkumar6704]

@@MarkoRoolaid thanks 😊

[@balsamidis]

can you tell us where to find the cg ?

[@gajahmada-rd9vj]

Hallo Mr, help me, the information Electronic ? Batre?....Esc....brushles and proppeler...

[@caf1971]

Can you share stl file which you used for cutting motor mount ? thx

[@waseemshah5865]

Very nice 👍 ... what is the thrust of this motor 7500kv

[@MarkoRoolaid]

hi, about 80g

[@waseemshah5865]

@@MarkoRoolaid very nice plane motor mount angle is 90°

[@waseemshah5865]

@@MarkoRoolaid and which battery you use.... Because I want to make this plane

[@waseemshah5865]

Can I use 300mah lipo battery for this motor

[@astr0yt344]

What charger did you use because I’m having a hard time finding a charger that is 500mah for cheap

[@MarkoRoolaid]

Hi, i use this charger www.robitronic.com/en/skyrc-rs16-charger-discharger.html

[@astr0yt344]

Thanks for the fast reply I’ve never seen anyone reply that fast 👍

[@BenPortmanlewes]

Why add the control surfaces? , they're there.

[@MrYeshwanthln]

Brilliant job..!

[@MarkoRoolaid]

Thank you

[@gmodesike]

AWESOME!!

[@MarkoRoolaid]

Thank you

[@lulufpv]

Hi ! Just one question, did you remember what was the flying weight of the aircraft please.

[@MarkoRoolaid]

I don't remember exactly, but it might be 120g

[@lulufpv]

Thanks ☺️

[@MarkoRoolaid]

kzbin.info/www/bejne/kGnJiWmna9eKfK8 Answer in the video. Must be more attentive :):):)

[@teddotesio-eyers5909]

Very good! How well does it glide (when the engine is off)?

[@MarkoRoolaid]

Hi Ted. When motor off it glide like a rock :):);)

[@matejhlaca5171]

Helo...I like your project..What if I use motor 1104 Brushless 4300KV? it will be OK? Best regards

[@MarkoRoolaid]

yes, that's fine

[@snoopysnoopyxupery5231]

Good video! Did you straighten the wings with an iron?

[@MarkoRoolaid]

Just between my hands

[@chrisellisrc8787]

Nice job!

[@Hangar11RC]

Great fun!!!

[@lulufpv]

Just a other question for the motor mount did you ad some down angle and right angle ? Or was it completely straight ?

[@MarkoRoolaid]

Hi, the motor angle is the same as the wing

[@lulufpv]

Ok Thanks

[@lulufpv]

I dis the mai de today ans… it flew ! even whit a 20 km/h wind i manage to make a 4 min Flight and l’and it properly

[@MarkoRoolaid]

super

[@danilodiano8323]

do you have an stl file to print the motor mount? or how have you done it? @@lulufpv

[@smashrc8481]

Certainly better now

[@musaknshahmussu6056]

Can you tell me what is the angle of motor mount

[@MarkoRoolaid]

hi, same as wings

[@rcforall4842]

Nice i know it's late but is there vector thrust for motor mount?

[@MarkoRoolaid]

@@rcforall4842 Hello, I have used the same angle as on the wing, i.e. parallel to the wing

[@rcforall4842]

@MarkoRoolaid thank you very much for your Fast reply realy appreciate i watch all your projects it's realy and Amazing skills and Artwork.

[@pabodhasahasmika]

Superb video

[@MarkoRoolaid]

Thank you

[@Владимир-ч5т1щ]

Спасибо за видео! Я пересмотрел очень очень очень много видео конверсий народного планера. (в России его так называют.) я нашел всего две самых лучших переделок, одна из них Ваша. Вопрос, как ведет себя модель, при резкой подаче газа? Обычно ставят толкающий винт с выкосом, а у Вас тянущий. Ось тяги винта расположена выше ц.т.

[@MarkoRoolaid]

Когда самолет летит, он вообще не знает двигатель. Двигатель расположен под таким же углом к ​​крылу.

[@connorkane8245]

how do you vontrol the servos?

[@MarkoRoolaid]

Hi, could you clarify your question.

[@МастАрт]

Круто у тебя получилось.

[@orzOTZorz]

1:54-1:59 is very suggestive. 😂😂😂😂😂😂😂😂

[@MarkoRoolaid]

;)

[@theBodger]

Check out the latest Chuck glider into a Biplane 😂😂😂🤪 just uploaded a short video, any comments would be appreciated.

[@mode2fpv]

where is the cg on this model ?

[@MarkoRoolaid]

CG in the first third of the wing

[@SharneAndrews]

Great stuff. Mind if I share on our aero modelling club website?

[@MarkoRoolaid]

It would be very nice. Be sure to do it. Big thanks

[@coverdestroyer3572]

Where is the cg position?

[@MarkoRoolaid]

The CG is located 1/3 of the wing width from the leading edge

[@coverdestroyer3572]

@@MarkoRoolaid ok thanks man

[@sathyaevmjmj997]

Hi bro can you give the motor mount lasercutting file

[@MarkoRoolaid]

I don't have it unfortunately, it's been asked for a lot but I didn't stock it properly and now it's gone. However, it is so simple that I believe you can do it yourself

[@sathyaevmjmj997]

@@MarkoRoolaid ok bro thanks

[@daviddavids2884]

some info. at 1:53, any free-flight model Must have nose-up deflection/trim built into its horiz-stab. evidence of this is Seen in the fact that, the main wing and horiz-stab openings, are NOT Parallel to one another.!!!!!! thus, conversion to rc Must, either, Eliminate this built-in ANGLE (and replace it with a movable elevator); or use LESS aoi, at the stab. googletranslate

[@sumutcyindustrial3995]

Terbang berapa menit dengan baterai 500mah

[@MarkoRoolaid]

sekitar 10 menit

[@antodawet1775]

Pesawat yang bagus....

[@MarkoRoolaid]

Terima kasih banyak dan salam dari Estonia yang dingin dan bersalju

[@romashin921]

На радио и дурак полетит, попробуй чтоб свободный полетел

[@daviddavids2884]

at 5:12, when ailerons are added onto the trailing edge of an otherwise complete airfoil, the airfoil is Changed; to a not normal state. the use of full strip ailerons is not recommended. on a model, a control surface Should have the shape of a Parallelogram!!! at 5:24, horiz-stab correctly made level. while (the Mass of a) servo is STOOPIDLY located at the tail!! covering the elevator with regular monokote, INCREASED its Mass!!!! Significantly. by, maybe, 50 PERCENT. that is NOT smart. googletranslate

[@EmmanuelFernandoSIbay]

But then, even if what you said were the proper procedures to design and build an airplane, you can't argue with the results because this converted aircraft flies wonderfully.😉

[@theoztreecrasher2647]

@@EmmanuelFernandoSIbay Yep. Whereas our friend's Infinity designs (Perpetual Motion Machines) don't seem to have got to the patentable stage yet! 😜😁

[@phearz0r]

i reckon the extra weight helped the plane overall, it was originally 49g and then was 120(iirc)

[@roberttperez1153]

The rear added servo weight is fine due to the fact that a considerable amount of weight was added to the nose of plane. The battery, receiver, ESC, motor, and mount balanced the plane rather well. As far as the wing foil the difference of shape is very little on an rc plane. Especially a small plane. Wing can be completely flat and it'll work fine. Air foils are very important on actual real man flown planes for lift due to the size of wings and airflow. One last thing. If you don't have anything good to say you shouldn't say anything at all. Rude remarks show how you need to work on yourself. Face and heal from how you have been treated in such manner. Don't treat others rudely if you're having a bad day, or have been treated rudely by someone else. The people you let out your anger are not at fault and didn't do anything to you. If anything find the person or situation that caused you to feel angry and deal with it. Resolve the situation so you won't get angry or feel hurt. If that's not possible then it's better to release your pain punching a pillow or exercising. Find a place where you can be alone and scream as loud as you can is another option to make you feel better. Peace. Great job to the one that build and made video of rc plane. Congratulations.

[@truth409]

Here we go on KZbin again with another ridiculous impossible For the masses have to have power power power power power and then they quit the hobby in 9 months..

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??

[@AAAAAA-iw9wk]

Can you share file which you used for cutting motor mount ???

[@MarkoRoolaid]

Hi, sorry,I don't have it anymore. But it's so easy to do. I believe you can do it yourself.

[@AAAAAA-iw9wk]

@@MarkoRoolaid no I cannot

[@AAAAAA-iw9wk]

What is the weight and flight time ????? And can you tell me a suggestion for how I can make motor mount??