CHEAP RC DIGGER | HUINA 1550 | RC EXCAVATOR UPGRADE MODS | HOW TO VIDEO

[@toolxtoy]

Great video. I like huina brand excavator.

[@Fpvfreaky]

원스토이Won's Toy thank you my Freind. Yeah they are a great starting place for a good build project. Have you seen my truck I’ve done.?

[@toolxtoy]

@@Fpvfreaky yeah. I just saw your great dump truck you modified. Your truck is fantastic.

[@Fpvfreaky]

원스토이Won's Toy thank you mate. Took me a while. I’m happy with it now👌😎

[@kennygee3494]

Hi THANKS for a great video. I ordered all the bits and pieces arrived within 4 weeks. Took a lot of your ideal took on a couple of others changed the wiring from the bucket button and changed with the small arm button makes it easier to control the upper and lower arms and bucket together at 72 it took about 10 hours to complete thanks to your video.

[@Fpvfreaky]

Kenny gee ahh that’s great news 👍🏽😁 well done.. I’m happy the video helped you. 👌 your wellcome

[@deswright2075]

That's,lovely work thank you far sharing with us! Would like to see a vid of the upgrades at work!👍☘

[@Fpvfreaky]

Cheers buddy. Your wellcome. Yeah most like in the summer hopefully with my tipper truck. 👌😉 they will be working.👍🏽

[@deswright2075]

@@Fpvfreaky I'm about to start on my 1550 today, using your video as reference!!! Little worried about the wiring but here goes? Lol

[@AweSomo84]

I must say your looks the nicest well done

[@Fpvfreaky]

Thank you bud. 🍻

[@dynamicrcworld748]

wow!! Really great upgrading video! i like and subd!!

[@Fpvfreaky]

Cheers bud. 👍🏽😉 glad you like it. And find it helpful. Have you seen the truck build.?

[@oscarbottazzi4231]

Do you upgrade the battery? I bet they have shorted life right? Oem 7.2v 700mAH you can add 7.2v 2000mAH same size but a lot more torque.

[@Fpvfreaky]

Oscar Bottazzi I’ve not upgraded battery yet as if I was to upgrade it to a lipo it might fry the board I might upgrade to esc’s.

[@rickmeiresonne197]

How are thd wires connected which digger wires go to which servo

[@Fpvfreaky]

Hi there rick sorry for late reply. I connected the servo wires to the motherboard of the digger. I didn’t show this. In the video. But you just replace the wires you take off from the original motors. And choose what controls you want best.

[@budakkampung7061]

Keren 👌👌

[@Fpvfreaky]

Thanks 👍🏼😁

[@Boyeie7614]

Nice excavator bro....good job

[@Fpvfreaky]

BoyEie Forever thanks mate 👍🏽😬

Hi ... Thanks for your video, I love it! I'm flying Bebop 2, Anafi and Disco, you too !!! Let's go to the next challenge ...

[@Fpvfreaky]

João Dias de Carvalho thanks 👍🏽

@@Fpvfreaky be welcome, best regards...

[@doktordrone]

Beautiful excavator 🙏👍❤️

[@Fpvfreaky]

doktor drone cheers dude 👍🏽😬

[@doktordrone]

FPV FREAKY 🤘💐💘🌟🌹❣️🦋🥃🥃🍺🍺🍼😁🙏🙏❤️

[@mynawanwarry4074]

great video......

[@Fpvfreaky]

Mynawan Warry thanks mate👍🏽😎

[@TheKarlsberger]

Nice vid, bud! Very useful and pretty detailed, really like it! All thumbs up👍🏻👍🏻

[@Fpvfreaky]

Thanks mate. Glad you like it. It might be helpful In some way. Cheers bro 👍🏽😉🍻

[@SRC22]

Nice

[@Fpvfreaky]

Cheers dude 👍🏽😜

[@joycemaguire4633]

Great video thank you for sharing 😊 💕👍 👍👍 👍

[@Fpvfreaky]

Joyce Maguire thank you 😊👍🏽

[@nerdCopter]

+1👍 when i first i saw the little hand, lmao CAT!

[@Fpvfreaky]

nerdCopter [Thibodaux Louisiana] 😂 cheers bro 👍🏽😬

[@ejay200704]

Great build my friend very nice indeed!

[@Fpvfreaky]

Merch RC thank you mate. I enjoyed this one 👍🏽😊

[@BeltranJTV]

Toy for bigboys! I wish to have one like this.

[@Fpvfreaky]

Beltran JTV 👍🏽😁get one. And the truck is good too.

[@AsikDrone]

Dude this was awesome... So much attention to detail!

[@Fpvfreaky]

Asik Drone ahh thanks bro sorry late reply. Yeah I’m quite pleased with the results.👍🏽😊Thanks for watching

[@WorldControlRC]

Great video and well explained :) I will also put a figure in my Huina 1580 :)

[@Fpvfreaky]

World Control RC thanks mate, Nice one, I’m pleased that it was helpful in some way 👍🏽😬

[@otizzlebabe8715]

Ok so you don't reply to questions but awesome how to video i will be upgrading soon thanks to you

[@Fpvfreaky]

notda daddy thanks buddy 👍🏽❤️

[@theminiatureconstructionco4556]

👍👍👍👍👍

[@maxair420]

This awesome!. iWant some diggers

[@Fpvfreaky]

maxair420 lol cheers mate. Yeah it’s a must. I’m hoping to do so miniature RC diggers soon. Might do a video on how to build one not sure yet. 👍🏽😁

[@maxair420]

@@Fpvfreaky do it. I'll watch 👍🏽

[@Fpvfreaky]

maxair420 👍🏽😁

[@furballkimfpv9365]

Wow looks way better. I almost bought one of those long ago. Awesome upgrade brother really nice.

[@Fpvfreaky]

Furball Kim FPV I’m glad I got it kim. I might get a lorry to. You know what’s goin to happen don’t you.? 😬👍🏽

[@HAAziz-se6il]

Mantaap brooo, berapa biaya upgradenya ini?

[@Fpvfreaky]

Hi bro.. this is where you can get them from.. ￡11.37 15％ Off | Upgrade Metal Arm Driving Servo Parts For HuiNa 1550 1592 RC Excavator Parts a.aliexpress.com/_vs9qWN

[@starshipfpv]

Dude. That is badass.

[@Fpvfreaky]

Kirk Mayberry Lol thanks kirk I love it now. Gona have some fun 👍🏽😂

[@painintherc7771]

Cool upgrades dude looks the part now 👌 thumbs up bro 👍

[@Fpvfreaky]

Pain in the RC thanks bro much appreciated. I do think she looks the part now.. 👌😬

[@jokebox7]

thank you, God bless you! ♥️

[@Fpvfreaky]

Novas Seven thank you bro 👍🏽😁❤️

[@MCsCreations]

Really nice work, man! 😃 This thing is awesome! 😃

[@Fpvfreaky]

MC's Creations thanks mate 👍🏽😃

[@Cyrushenrik]

What a big bild :-) LIKE

[@Fpvfreaky]

Cyrus-FPV thanks man 👍🏽😊

[@williamswackyworld7184]

Hey!! Great upgrades!! Did you have to do anything to your drive motor/gear setup to eliminate the slipper clutch gear because of the extra weight?? I have the double e excavator and did this

[@Fpvfreaky]

Eric Carberry hey man thanks. No I didn’t do any upgrades to drive motor it handles the weight just fine, I didn’t see it necessary at the moment. Oh ok cool, yeah I got one of them couple weeks ago £15 bargain 👍🏽😜

[@jerryebner159]

real nice video, will this work on the huina 1592 ?

[@Fpvfreaky]

Thank you my friend. Yes it will work 👌🏽 but I think they might be a little different . But very much the same principal and location of parts .

[@pelemlangka]

What scale model figures can fit into the cabin?

[@Fpvfreaky]

Hi I’ve just seen your comment so most likely to late sorry, But it’s about 3.75 inches. With cutting the floor panel out to fit the full man in. hope that helps www.ebay.co.uk/itm/284003450455

[@waxfire4482]

epic build !!! nice work i like the mode looks clean and tuff !!!

[@Fpvfreaky]

Wax fire thanks mate👌😊 it works great to. Will go with my Lorry build soon to be completed😛

[@Lukekvvv8]

Great work!👍😊The upgrading process is interesting.

[@Fpvfreaky]

Luke thank you mate glad you liked it 👍🏽😊

[@cataere5012]

For the huina 1593 excavator is it good? Thanks

[@cataere5012]

Driver?

[@Fpvfreaky]

www.ebay.co.uk/itm/285560258494?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AiP-k87RQqe&sssrc=2051273&ssuid=AiP-k87RQqe&var=&widget_ver=artemis&media=COPY

[@Fpvfreaky]

Yes it is good. 👍🏼😉

[@gabrielpichardo1492]

Can you please post the link for the servos here? The link in the description doesn’t work

[@Fpvfreaky]

Here mate. ￡11.83 4％ Off | DIY Upgrade Metal Arm Driving Servo Parts For HUINA 1550 RC Crawler Car 15CH 2.4G RC Metal Excavator Metal Arm Part a.aliexpress.com/_EIeAUef

[@magnelien9771]

Hi! Nice modification. Can I ask you where you got the little mounting-bracket for the boom-servo? The one that is attached to the cabin? Did it come with the servos?

[@Fpvfreaky]

Magne Lien hi mate thank you very much, yeah that part comes with the servos and screws etc . [£50.20 20% OFF]Huina All Metal Strength Main Arm Second Arm Bucket Arm Driving Rod For RC Excavator RC Car Parts RC Parts from Toys Hobbies and Robot on banggood.com banggood.app.link/bJwMbcJO62 They have put the price up since makin this video,

[@Fpvfreaky]

Magne Lien [£39.23 11% OFF]Huina Professional Metal Strength Main Arm Second Arm Bucket Arm Driving Rod for RC Excavator RC Parts from Toys Hobbies and Robot on banggood.com banggood.app.link/oqG8jUSO62 The ones I used are these ones. But not in stock at the moment. Hope the video helps you, 👍🏽😎

[@magnelien9771]

@@Fpvfreaky Thank you very much for your fast reply and good help :) Kind regards from Norway :)

[@Fpvfreaky]

Magne Lien no problem brother👍🏽😁 any problems with doin yours just message me mate. Kind regards from the UK 👍🏽😎

[@adrianwilliams3521]

Hi bud nice work where do you get the kit from for this mod

[@Fpvfreaky]

Hi mate thank you. I’ve just found a link as all the others are not working anymore. Here’s the link for the motors ￡12.09 15％ Off | Upgrade Metal Arm Driving Servo Parts For HuiNa 1550 1592 RC Excavator Parts a.aliexpress.com/_vPxRoN

[@Mastertech6]

Nice channel bro!!

[@Fpvfreaky]

John LaRocca, MDT thanks man I really appreciate that thank you.

[@tommyharbofriis]

Working on mine later this week, thx for the video,, 😁 Ohh. And btw, there Are 3 different lengt avtivator, where shall one mount Them, i guess short at showel, medium at 1 and 2 arm, long one to body..

[@Fpvfreaky]

tommyharbofriis hello mate. Oh cool .👍🏽😁 yes that’s right just Measure them up before you fit them, I’m sure you will be fine. It’s pretty easy. I’m pleased the video helped you. You have it for reference aswel. Your wellcome. If you get stuck just message I normally get back to you. If I’m not to busy 👍🏽😎

[@tommyharbofriis]

@@Fpvfreaky iam done, now wait for wigths, btw,, have you ever ruin one the actuatores If you dont have endstop?

[@Fpvfreaky]

tommyharbofriis that’s good man👍🏽😎, no you won’t bust them. They just stop, on the end points, but if you hold your end points on to much you might ive not done this. You should be fine.👌🏽🍻

[@Libraman1]

Great video. Do you think this upgrade is possible to do on the Top Race TR-211?

[@Fpvfreaky]

l1braman hello mate thank you very much for your comment, I’ve just looked that digger it looks very similar to the huina and I don’t see why not, same principle applies for that one, I have another digger that’s a copy of the huina and same type of mods could be done, so I would say give it a try buddy 👍🏽😬.

[@andrewmagro7703]

can you run a lipo 2S straight out of the box no mod doing? any help will be greatly appreciated bud? also subbed great video mate :-)))

[@Fpvfreaky]

Andrew Reece hi mate. I wouldn’t try it. I don’t think the board can handle a lipo. I’m still running my stick battery on mine. Since doin all the mods to mine I’ve not done anything with it. As I got the truck and started to mod that aswel. But I might do some more mods to it when I get time. I’m in to micro scale Rc now mate. It’s better than the big stuff. There is a huina Facebook group that might be able to help. I’m on there. But I don’t share much on there lol I should really just not got time, I’ll send you the link bud. Cheers Lou

[@Fpvfreaky]

Andrew Reece Here’s the Facebook group bud. 👌😉 facebook.com/groups/2727308737549280/?ref=share

[@motokandoporai3512]

Estou fazendo o mesmo upgrade na minha. Onde conseguiu os adesivos CAT?! Obrigado

[@Fpvfreaky]

Anderson Diefenthaler hi👋🏼 Here.: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F283500164994

[@MOREENGINEERING]

NICE! can't wait to see in operation. Thank you for sharing. I guess you could do the same to an ALL METAL version? (or would it already come with servos?)

[@Fpvfreaky]

PS CustomMade thanks for your comment. Yeah you could do a die cast version if you could get a good sized one, I want to do a micro build rc version that would be so cool. I would take up so much room.😊 and I will do a video once I’ve completed my rc tipper lorry👍🏽😎. Really appreciate your support

[@rccrew4932]

How did you connect the wires?

[@Fpvfreaky]

R.C Crew hi buddy sorry for takin so long to reply didn’t get notified . I soldered them to the mother board. Straight to the servos . I’ve done another video of a lorry build in doin.

[@rccrew4932]

@@Fpvfreaky thanks a lot man. Your great!

[@Fpvfreaky]

Huina 1573 my lorry build part 1 👇🏼 kzbin.info/www/bejne/eZXFdI2Qp9uhoKc Lorry build part 2👇🏼 kzbin.info/www/bejne/l5elkmeKYt2ogJo Lorry build complete kzbin.info/www/bejne/qpqQgYqKo9iJhrs

[@rickythegamerkid8063]

Does the little toy man comes inside

[@Fpvfreaky]

@@rickythegamerkid8063 no. I normally have the man in stock. But out of stock at the mo.

[@rickythegamerkid8063]

@@Fpvfreaky ok cool

[@RCkatingan]

Link shop miniatur/figure oprator ??

[@Fpvfreaky]

www.ebay.co.uk/itm/285539347146?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AiP-k87RQqe&sssrc=4429486&ssuid=AiP-k87RQqe&var=&widget_ver=artemis&media=COPY

[@Fpvfreaky]

Sorry only just seen your message. Last one.

[@RCkatingan]

@@Fpvfreaky oke.. thnks bro

[@Libraman1]

FPV FREAKY: Thank you for the reply, I'll order the servo arms and try and find someone who can upgrade my it for me, not sure if I can do it myself. many thanks again for the quick response, keep up the good work.

[@Fpvfreaky]

l1braman give it a go mate. This was my first time doin my one. I thought I would document it just in case I lost bits and didn’t know where it went. Took pics. Then I sheared it on here. Your welcome bro. 👍🏽😋

[@Libraman1]

@@Fpvfreaky I've ordered the servos now. I'm more worried about the wiring where to connect them on the circuit board also I've never soldered anything before(god I sound like Scooby doo I'm afraid of everything) So while I'm waiting for them to arrive I'll get some much needed tools to help with transition. Thanx for the encouragement and the response.

[@Fpvfreaky]

l1braman 😂😂 ragggy rare are rooo 😂😂 hahaha that made me chuckle . Good man good to here it. If you get stuck just message me mate. The servo wires just go where the motor wires go, all your doin is just replacing them with your servo wires 👍🏽😊. Your wellcome .

[@Libraman1]

@@Fpvfreaky Hey man, I'm glad you got a chuckle out of it 😂. Thanx for advice and the offer help if I get stuck, I'll surely drop you a line if I need to do so , just look out for the bat sign😂. btw where are you based? Many thanx again 👍🏾

[@Fpvfreaky]

l1braman no worries mate. 👍🏽😁 I’m from the uk. You.? Bat sign hahahaha 👍🏽😂

[@andersonlinan2034]

Donde se pueden conseguir esos motores para el brazo

[@Fpvfreaky]

anderson liñan [£39.31 11% OFF]Huina Professional Metal Strength Main Arm Second Arm Bucket Arm Driving Rod for RC Excavator RC Parts from Toys Hobbies and Robot on banggood.com banggood.app.link/2v72XRSQZ2

[@otizzlebabe8715]

Hey where cam i get the servos and do you do custom mods if so let me know i will pay

[@Fpvfreaky]

notda daddy hi mate sorry it didn’t notify me that I had a message. Thank you for your comments. It’s really kind of you. The servos are listed in the description , I got them from banggood . And I do customise them but not at the moment sorry I’ve to much going on. Kind regards Lou 👍🏽😊

[@phillip5551]

Hello there this is phill im very interested getting my 1550 excavator upgraded to the better servos

[@Fpvfreaky]

theme park crazy hey buddy. Yeah sure you got my details. I’m sure we can sort something out . Always happy to help mate 😊👍🏽

[@Fpvfreaky]

LINKS FOR THE PARTS IN DESCRIPTION ☝️ABOVE

[@Anapaula32567]

Vc faz pra alguém tbm ou só pra vc

[@Fpvfreaky]

Hi I only do this for myself. And to show others how to did it for themselves. Thanks for your comment . 🙏🏼

[@Anapaula32567]

@@Fpvfreaky ok

[@daver18qc]

You seem to have made a small mistake. Your main arm servo is installed too far away, preventing full travel. If you check on the official upgrade video by banggood, you can see you need to drill a new hole 59mm from another already present hole. See this video at the 6:09 mark : kzbin.info/www/bejne/qYuwoaePeap5ma8

[@Fpvfreaky]

Dave Racine hi mate oh ok thanks for pointing it out I will take a look. Thanks for commenting and watching it mean a lot to me 👍🏽😁

[@Fpvfreaky]

FOR THE DRIVER www.ebay.co.uk/itm/285539347146?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AiP-k87RQqe&sssrc=4429486&ssuid=AiP-k87RQqe&var=&widget_ver=artemis&media=COPY

[@davesilvia9711]

it needs a thumb

[@Fpvfreaky]

David Silvia lol what the digger. 🤭👍🏽😁

[@davesilvia9711]

@@Fpvfreaky yea, so you can pick stuff up!

[@dcfphilrc5832]

Nice