Cheap Two Tone paint job on a Budget

[@SprayWayCustoms]

Nice job King 👑 Keep that motivation coming 🤝

[@UndergroundPaintKing]

Appreciate you Sprayway 💯💪🏾

[@Grant7]

Lol@ we’ll get back to the pride on another job!!!! HILARIOUS!!! Lol

[@UndergroundPaintKing]

😂😂😂 for real bro, I’m putting pride to the side lol

[@thetriggerman954]

That vevor getting busy. You ain't mask that man car up you going to be fixing a bullet hole from your butt man 😂😂😂😂 . Looks good champ 🏆💯

[@UndergroundPaintKing]

🤣🤣🤣 he wasn’t even concerned about the masking Triggerman and you’re right that Vevor gets busy💪🏾💯

[@thetriggerman954]

@@UndergroundPaintKing yea I still use mine weekly. I just don't record it as much but she still kicking. Nice work brother man 🤜🏼🤛🏼

[@BT-ih6kr]

another great video UPK. i know what you mean when you just want something out the door. is that vevor much different than the Sprayit R500? or does the larger compressor make the differnce. i bought the sprayit based on your videos and i have a typical 25 gallon compressor. i paint cabinets and find it works great for that. bu the R500 is LVLP and the vevor is HVLP isn't it? also, what do you do with the tape line that i assume is left from the blue and clear color?

[@UndergroundPaintKing]

Thanks B T, I appreciate you and this Vevor spray gun is different from the R500 and should be ran with a large compressor, as far as the tape line it’s not a hard tape line because I used the fine line and I can finish it with a pinstripe if it is a hard line

[@BearBudgetgarage]

Back to back video watching. Works for me👍 I watch a few videos every night when my own work is done. Spraying without a clear/alert mind? Yeah. I learned about that too! I plan paint days now and don't combine maskimg or other work that day if its a full paint job. Just clean and go on a new day.

[@UndergroundPaintKing]

That’s the best way to do it Bear, I like to mask one day, then spray the next!

[@wacoldestv1704]

This video shows growth on your end. Showing jobs less appealing to yourself . It may be watched by tons in the future. The words are knowledge king!

[@UndergroundPaintKing]

I’m working on trying to turn as much as I can into a helpful video so hopefully these videos will help people now and in the future!

[@ganeshnarayan5505]

Great video UPK man beautiful paint job thanks for sharing.

[@UndergroundPaintKing]

Thanks Ganesh, it’s always good hearing from you 💯💪🏾

[@pstreetgarage7304]

It looks great King, you are being hard on yourself. That shade of blue really pops

[@UndergroundPaintKing]

Appreciate you PStreetGarage, after getting the base and clear completed, it turned out nice, I was just ready to be done with it 😂

[@wacoldestv1704]

Don't be so hard on yaself? Self reflection is the best teacher. Looks great, stepping back to ease off a project is hard but necessary.

[@UndergroundPaintKing]

Appreciate you Bro! I’m glad it’s done and out the shop 😂

[@Michigunner]

Some of those blues are a pain in the arse. Throwing on a ground coat of a tinted gray can help with coverage. Nice job!

[@UndergroundPaintKing]

I agree Larry, this blue was taking forever to cover😂 I appreciate the tip💯

[@jamesadams3476]

Fantastic job upk like that color keep the videos coming my friend

[@UndergroundPaintKing]

Will do James! I appreciate you my friend 💯

[@stevenpetty1694]

UPK Sir what do you use to clean your spray gun? Lacquer thinner?

[@UndergroundPaintKing]

Yes I use Lacquer thinner Steven

[@larrydurr6064]

Hey bro watching you put primer on the cut list go ahead keep dropping videos pound amount if you can have a good day man

[@UndergroundPaintKing]

Thanks Larry, I appreciate you my friend and it’s good hearing from you !

[@nigelthomas6642]

The Kiing done it again another flawless 💪 job looks good bro

[@UndergroundPaintKing]

Appreciate you NIGEL 💯💪🏾

[@mark7218]

Looks lovely King, did you take masking off the next day to get that nice edge

[@UndergroundPaintKing]

Yes sir I did Mark, I appreciate you checking out the work 🙏🏽💯

[@jrummy73]

New subscriber here. Found you from sprayway channel.. On this 2 tone job did you have to scuff or sand the bottom half of this suv before painting?

[@UndergroundPaintKing]

I appreciate you subscribing to the channel and yes I sanded the bottom half of the suv before I painted it 💯

[@jrummy73]

@@UndergroundPaintKing thank you for the reply. Just started taking an interest in painting and watching all I can to learn as much as I can before trying to tackle a paint job

[@UndergroundPaintKing]

@@jrummy73 I hope the channel will be helpful to you!

[@manuelmejia76]

Like alway top notch appreciate you actually take time to answer the comment 💯

[@UndergroundPaintKing]

Thanks Manuel, I appreciate you and I do my best to help out in the comments 💯

[@manuelmejia76]

@UndergroundPaintKing by the way my daughter loves the hoodie bro

[@hankshobbies]

Another great video from the man

[@UndergroundPaintKing]

Appreciate you Hank and I hope the video helped 💯

[@yeayeasautoadventures]

BOOM, great vid King

[@UndergroundPaintKing]

Thanks JoCo, I Really appreciate that 🙏🏽💯

[@tonyadams09]

Great video but want I would have never covered pearl white if I didn't have to.

[@UndergroundPaintKing]

Thanks Tony, I appreciate you and I honestly don’t know why he wanted to do a two tone!

[@tonyadams09]

@@UndergroundPaintKing I have my 67 Gmc 90% done may getvwith you on painting before first of the year

[@UndergroundPaintKing]

@@tonyadams09 let me know what you decide and we can work out the details!

[@dollabillbrunson8107]

Good job Brutha!

[@UndergroundPaintKing]

Appreciate you Dolla Bill💯💪🏾

[@nelsonfernandez7473]

Honest great advice for us all ,but man that color is awesome, and the customer I'm sure will be really happy, good job again from a pro ,masking is great, wish we just knew half what you know, and with family or friends the money ain't never going to be right, looks good and glad you gave us the opportunity to see the work

[@UndergroundPaintKing]

He was happy with it Nelson and I’m going to do my best to help everyone learn as much of this craft as I can!

[@richardblanke5521]

AWSOME 💰

[@UndergroundPaintKing]

Thanks Richard, I appreciate you checking out the video 🙏🏽💯

[@Jason-zr6il]

What was your gun setting for the vevor?

[@UndergroundPaintKing]

Full Fluid, 1/4 turn from full fan and 30 psi

[@Jason-zr6il]

@@UndergroundPaintKing okay. You don’t think this gun puts out too much material?

[@UndergroundPaintKing]

@@Jason-zr6il it puts out a lot of material

[@philipbaker2302]

Pretty blue color. Maybe you should have used the AeroPro to spray the base then your Sata clone. All in all good job as usual.

[@UndergroundPaintKing]

Thanks Philip, I appreciate you and I probably would have done the same thing with the Aeropro but I’m glad I got it done!

[@jayinmi3706]

When you started talking about forcing it...I felt attacked. lol I totally relate!

[@UndergroundPaintKing]

I do it way too often Jay😂

[@bear_vibes5130]

Single stage or base clear?

[@bear_vibes5130]

Nevermind that was your next word. Not skipping through the vid.😂😂

[@UndergroundPaintKing]

😂 appreciate you Bear💯

[@bear_vibes5130]

@@UndergroundPaintKing Looks good bro. Keep it up.

[@UndergroundPaintKing]

@@bear_vibes5130 Thanks Fam, I got a lot more to come!

[@theoldfartsgarage]

Looks great for a cheap job. I hope mine looks that good, I just masked off my project for a two tone paint job 🤣

[@UndergroundPaintKing]

I know your project will turn out great and I appreciate you checking out the video 💯💪🏾

[@arnierock9558]

Great job as usual

[@UndergroundPaintKing]

Appreciate you checking it out Arnie 💯