Cheap TX Radio Transmitter - UNDER $30. Unboxing and how to use it!

[@robertowens7771]

I actually have this same radio in my hand while I'm watching this video, it is amazing/wonderful and has all the range that I will ever need I love it

[@blackspec1855]

I just got my hands on this, surprisingly, it is very good.

[@JPLlani]

It is isn't it? Entry level but does the job. I think it looks nice too. If you ever want to upgrade, I can recommend the FlySky FS-GT5.

[@wolfenher6937]

I recently bought one and it looks really good out of the box and it does really feel good in the hand. I was laughing at it cause of how small it was when I took it out of the box lol but damn it does look good and now that I know how to use all thanks to you! Thanks for the tip as well too! 🤘

[@JPLlani]

Ye. I thought the same haha. But its really comfortable to hold as its so small. Even for a child its easy to hold. Its really easy to adjust settings once you know. Very good for the price I think. Enjoy it my friend 👍👊

[@ShamimAraShamimAra]

Your car battery volt? Battery power?​@@JPLlani

[@valleysoundboy]

Really useful review, thanks. I bought one as a result. GBP 18.89 Incredible value. ✌️

[@JPLlani]

Thanks! Appreciate it. It really is good value. Wasn't sure what to expect at first but so far so good. Enjoy it ! 😀

[@ShamimAraShamimAra]

​@@JPLlaniyou car engine brushed name?

[@hughrs]

What about setting steering end points

[@damianmoto1991]

How turn on failsafe?

[@rielcatubigan417]

I have that sir, my problem is that the reverse only works when I changed the wire of the motor to esc. It's the same, only the cycle has changed.

[@JPLlani]

Hi. I'm sorry but I don't understand. But maybe you have to change the settings on the esc.

[@rielcatubigan417]

how to factory reset sir? it is possible sir with this transmitter?

[@JPLlani]

@@rielcatubigan417 I dint think you can. Its a very entry level/ simple transmitter. Try checking the esc.

[@JaceN3D]

@@JPLlani i think he has the same problem i have. When i pull the trigger to me, it accelerates, but when i push the trigger outwards it wont reverse

[@JPLlani]

@@JaceN3D i think it probably is the esc settings.

[@MeherazUddinAbir]

Did the receiver work with another remote?

[@lucasbatista5487]

Hello, I have a control similar to this one, today when I tried to use it, the blue LED didn't light up, just about 3 red lights that soon went out, the batteries are good and have been tested, do you have any idea what it could be?

[@nemag1]

Hello,I have a problem with this board I'm testing on wpl c24 On the 370 motor. The problem is that the response speed to actions is very slow or freezes, the motor does not work well. I think that the problem is in the power regulator, please help

[@JPLlani]

I'm sorry. I have no idea especially without seeing it. I bought the transmitter and have not had a problem. Might be the esc or maybe even the servos. Have you tried the transmitter and receiver on another car?

[@nemag1]

@@JPLlani Hello, I have solved the problem with the response, now the problem with the servo does not turn well, I ordered a new one on the Internet

[@nemag1]

@@JPLlani hello again 😄 I solved the problem with the servo and it turns out it was in the wrong remote control settings. Everything is working well now 😁

[@JPLlani]

@nemag1 oh nice. Glad you worked it all out! Now enjoy your RC!

[@nemag1]

@@JPLlani thank you 😁

[@tysongoodacre2617]

Hey I have the same combo and I’m having a issue, it works fine when I input it, but when I’m not touching the transmitter it beeps every couple of seconds then accelerates by its self, do you know what this issue can be and how to fix it?

[@seanm1168]

How do you set this up I’ve plugged it all in but the controller doesn’t actually control anything 😅

[@JPLlani]

Erm have you tried binding the transmitter to the receiver? Mine came bound already but who knows. Follow the instructions it comes with. I have no idea where mine are haha.

[@seanm1168]

@@JPLlani cheers I’ll give it a go in the morning 😆😁

[@JPLlani]

@seanm1168 good luck haha. If I find mine ill write to you the steps.

[@seanm1168]

@@JPLlani Thankyou!

[@joebxth]

Is the steering wheel foam?

[@JPLlani]

No. Its plastic. But it feels pretty good.

[@MrMulticam21]

Is the receiver really waterproof? Did you test to submerb in the water?

[@JPLlani]

@MrMulticam21 No. It is not waterproof. At least mine isn't. If there is a new version now I am not sure. But the one in the video is not waterproof.

[@evoemperor3776]

I love how the throttle feels but mine went crazy and crashed my buggy max speed into a wall. I didn't know if it was the recievers fault or me but after that crash whenever i turn the transmitter on my buggy goes on full throttle without input but when i shut the transmitter it turns off

[@JPLlani]

Wow strange. Could be the throttle trim? If not, like you say, maybe it's a faulty reciever. Doesn't seem like it's your fault if it keeps happening 🤷‍♂️

[@JaceN3D]

How do you make it go reverse?

[@JPLlani]

You push the trigger away from the handle. Pull it towards the handle tp go forward. Hope this helps.

[@3PGBandDavao]

I have a problem, whenever i grip the trigger to move forward, the car will reverse. Same thing with the steering, it goes opposite direction. How do i troubleshoot it? The functions are completely reversed

[@JPLlani]

Hi. Check the throttle reverse (th_rev) and the steering reverse (st_rev) on the transmitter. If that doesn't solve the problem try changing the esc settings ( if esc allows). Hope it helps.

[@3PGBandDavao]

Oh man! Works like a charm bro. Thanksssssssss!!! 👏👏👏

[@JPLlani]

@@3PGBandDavao no prob man. Glad it helped!!

[@albertopalos8326]

Como cambio la reversa?

[@rielcatubigan417]

and when I changed the channel of the servo to the motor, the forward and reverse worked using the throttle, but the steering on the right only worked, I hope you can help me, tnx sir

[@evancreeper182]

And I know it’s consistent but why does it have ch3 and ch4 options? But doesn’t have the rest of the channels? I’m a noobie when it comes to stuff like this so my apologies

[@g.b-MTB-trail-jumps3062]

Perfect vid champ...very helpfully👌 Keep going my friend👑

[@JPLlani]

Thanks dude!

[@williamcody2466]

Does it have gyroscope?

[@JPLlani]

No. Unfortunately it doesn't.

[@KyrAlexiscy]

Hello, i oldered that controller but i have the following issue... when the controller Throttle trigger is in neutral position my model goes forward and when is in position forward/accelerate it brakes... Did you faced something like this?

[@JPLlani]

There could be a couple of reasons why when you accelerate it brakes. It could be the wires that connect your motor and esc are wrong connected (depends which esc/motor you have). It could also be the settings on the esc. If you can access the settings, there will be a setting to reverse the turn of the motor. This is what happened to me. As for the rc moving forward when in neutral position check that the throttle dual rate is in the middle. Hope this helps.

[@KyrAlexiscy]

Thank you for the answer... I believe is the esc issue... I also will check throttle dual rate..

[@JPLlani]

@@KyrAlexiscy no problem. Hope it works out. Any problems and ill try my best to help out 👍

[@JaceN3D]

@@JPLlani ok thank you i was about to sell mine. Thanks 🙏🏾

[@JaceN3D]

@@JPLlani also what button is throttle dual rate

[@marcodegidio3951]

Hello I'm going crazy, I have a problem, as soon as I steer the car brakes automatically without applying the brake, as soon as I unplug the battery from the car and steer, the tires turn normally and don't brake, can someone please help me here?

[@foxtrot1787]

mine has contant beeping and all my batteries are fully charged. I cant find anything in the manual about it. Anyone know?

[@JPLlani]

Hey. I honestly have no idea. The only thing I can think of is that the batteries in the remote are either faulty or low?

[@stratiosastero6880]

can you use powerbank as power supply? they have low voltage (5V 1A some powerbanks have 2A) will they operate on 5V or need more? powerbank capacity i want to use is 8000mah 5v and 2A .

[@JPLlani]

Sorry for taking long to reply. There is no connection to plug anything in so I dont think you will be able to use a power bank. It takes 4x AAA batteries so 6volts. Its a very simple remote so I think the batteries will last quite long. Ypu could always put rechargeable AAA batteries instead. Hope this helps.

[@stratiosastero6880]

@@JPLlani well i think its possible to make bypass wiring so can connect powerbank instead. just not sure if 5v is eoungh or not

[@JPLlani]

@@stratiosastero6880 oh if you can do that brilliant. I dont have enough knowledge to give you an answer. Sorry. You could always try it if not go back to the original 6v. If you manage to do it let me know.

[@stratiosastero6880]

@@JPLlani well how much voltage it needs? That Way can test various power supplies before pulling powerbank trigger.. I need to know the specification of this device So that gives me clues what to do

[@JPLlani]

@@stratiosastero6880 it uses x4 AAA batteries which are 1.5v each. So 6v. This is what the manual says: Voltage Input: 4.8V-6V 1.5AAA*4 Low Voltage Warning: 4.5V Hope this helps.

[@evancreeper182]

Yeah i gotta get a esc but will the options in it be possible for it to turn a whole lot like a rc drift car?

[@rcflashcars]

cool vid!! big like!👍👍👍

[@JPLlani]

Thanks so much!

[@ririnismiyati8790]

How about the distance of this tx mate?

[@JPLlani]

Honestly I havent tested it. I have used it on a track. Maybe 25-30m away it was ok. You would hope it does well at that distance anyway haha. Ill try to test it out soon and let you know.

[@betaografites4695]

eu posso colocar tres servos independentes nele

[@shakilscreativezone]

What kind of esc u use? Brushed or brushless?

[@JPLlani]

In the video it's a brushless esc. But I'm sure it will work with brushed too.

[@davemiller262]

Is there any info in the manual about mixed control of channel 1 and 2? im thinking of getting it for a dual motor RC boat that steers with differential thrust

[@JPLlani]

Hey. Its a pretty simple instruction manual and transmitter. Instruction manual just has basic operation. The transmitter doesn't really have a setup menu or anything. I dont think it can be used as you'd like. Im no expert, nor do I fully understand how to do configure a setup like that, so I couldn't tell you for sure. But its a pretty simple remote so I doubt it. Might I suggest looking at a remote like the FlySky FS-GT5? Hope it helps and good luck with your build dude.

[@davemiller262]

@@JPLlani thanks for your reply. Most listings for that model number say its capable of mixed control but dont say how to do it. I found a big rc boat at a thrift store and am trying to see if i can make it work. Battery, motors, hull and everything are working but i cant get it to do anything. It's unbranded but looks like a "doublehorse rc boat" i found here on youtube. Uses dual 380 brushed motors. I dont know anything about rc stuff but i like to tinker. Seems like if i can find a controller/receiver capable of mixed control and a couple of appropriately sized brushed escs ill be good

[@JPLlani]

@@davemiller262 haha ye tinkering is half the fun! I have looked around KZbin to see if I could find a quick answer and figure out how it might work. I think its more the way you wire up your esc's. Like you rightly say, you need two. How exactly to wire them i have not yet figured out. Sounds like a really cool project though. You could always get a dual stick transmitter and control it like a tank haha. When you get it to work let me know. Good luck dude!

[@jonathanpedros3336]

Hi, how about the receiver? it says support max 6 Volt. and i got 7.4 v battery for my rc. it is safe running with that battery ?

[@JPLlani]

Hey. I think the 6v refers to the actual remote (4xAA which is 6v). So you won't be able to use a large pack like you can with higher end ones. I use a 4s or 11.1 battery for my rc and its fine. You will have to be careful if you want to use a higher end high voltage servo. It says it supports High voltage servos but they are usually 7.4v and the receiver only supports up to 6v. But as long as you are using a normal voltage servo (6v) and havent changed the settings on the esc you should be fine. 👍👍

[@jonathanpedros3336]

@@JPLlani So lets say it is depend on the esc spesification too right? I mean if the esc can support the battery until 11 V, thats would be no problem..for the trx itself is it the receiver electronic is good i mean no issue so far while u using it? just want to buy but still doubt at it 😀 anyway thanx for your explanation

[@JPLlani]

@@jonathanpedros3336 yes. Should be fine as the battery isn't connected directly to the receiver. It will only be a problem if you change the esc settings to be able to use a high voltage esc. But as long as the esc settings are for 6v, which most esc are from factory. Then there will be no problem in using it. 👍👍

[@shakilscreativezone]

Can i do reverese system with it?

[@JPLlani]

Reverse system? It does have reverse if that's what you mean.

[@bayupamungkas7917]

Good video tutorial 👍, I have question, it's safe when I use 7.4 V 2s lipo batery ?

[@JPLlani]

Thanks. The 2s battery for what? To power the transmitter or on the rc car?

[@JPLlani]

If you are using the 2s lipo on the car, yes it is. I use mine with a 4s (11.1v) lipo. The 6v limit is for the servo. You cannot run high voltage servos which run on 7.4v. But as long as the ESC BEC settings are set to 6v you should be fine.

[@evancreeper182]

Will this work well for a drift rc car?

[@JPLlani]

Hi. I dont see why it wouldn't work. I dont have a drift car but I think the most important bit will be the servo for quick steering and quick change of direction. The transmitter is the same as any other so should work fine. Hope it helps. Enjoy drifting.

[@MaxeeOffroadRC]

Excellent footage. Good job my friend 👍

Thank you for sharing, your video is very good, I love it. Nice to meet you. Wish you happiness and success in life💛💛🧡🧡

[@JPLlani]

Thanks so much. Really appreciate it 😁😁

[@HighPower-Laser-Store]

Mini car?

[@JPLlani]

Sorry?

[@HighPower-Laser-Store]

@@JPLlani Can I make a 1:64 mini car?

[@rcfreedom1352]

Nice video. It looks like a good receiver.

[@JPLlani]

Thanks. Ye used it a few times now. Seems decent. Time will tell.

[@AndreaFacco-ex2py]

Sto cercando le istruzioni in pdf qualcuno le ha?

[@itsjustbob]

Functions? Link in description? Trying to figure out the TH_REV and ST_REV fundtions. kzbin.info/www/bejne/q6mmXp6gbt9psJo

[@JPLlani]

Hey. What are you trying to figure out? It does what it is. It reverses your steering or throttle. So for steering if you turn your transmitter left the wheel will turn right steering your rc right. Vice versa if you turn your transmitter right. As for the throttle, it is much the same. If you squeeze your pistol grip transmitter your car will brake/reverse and if you extend your finger and pull it away your rc will go forward.

[@evancreeper182]

Yeah i gotta get a esc but will the options in it be possible for it to turn a whole lot like a rc drift car?

[@JPLlani]

Hi. I dont own a drift car but I dont see why it wouldn't work. Its just the same as a normal rc transmitter. Just make sure your servo is quick. Nothing go do with the transmitter though. Hope it helps.