Installing the head and head gasket on a Perkins 152 /Massey

[@LouisianaTractorworks]

That went together nicely! It's funny how fast you can sink money into these things! Thanks Pete!

[@onlywatching6504]

I’m just about to do exactly the same overhaul on a Perkins AD3/152 -it sits in a Volvo BM-T 430. I got the traktor for free because the farmer don’t have the time or energy to fix it. The engine is rusted to a hault because it has been exposed to the elements for years -rain and snow has penetraded via the exhaustpipe . I just want to thank you for your videos -it can’t get any better than this👍😀. Almost like being back to school again. Tnx a million times 👍👍😀😀

[@westleyclayton5872]

i know Im randomly asking but does any of you know of a way to log back into an Instagram account?? I was dumb forgot the password. I appreciate any assistance you can offer me

[@brookssalvador7888]

@Westley Clayton instablaster ;)

[@westleyclayton5872]

@Brooks Salvador thanks for your reply. I found the site on google and I'm in the hacking process now. Looks like it's gonna take a while so I will get back to you later with my results.

[@westleyclayton5872]

@Brooks Salvador it worked and I actually got access to my account again. I am so happy! Thank you so much you saved my account!

[@brookssalvador7888]

@Westley Clayton You are welcome xD

[@Warny1969]

Coming together nicely.Look forward to hearing her roar.

[@Wrenchesandboards4u2u]

Really enjoyed this video. It is definitely coming together. Have a Blessed Holiday Season and Merry Christmas 👍👍 😀 friend.

[@HomesteadingwiththeHeberts]

A lot of projects would be good if we had two people but unfortunately we tend to work on projects by our self when we have the time. Great video my friend. Have A Merry Christmas.

[@evonrichards1264]

Does the tractor use cut of head gasket or straight head gasket and it doesn’t matter once the oil and water holes match up ?

[@travisricks3436]

Pete, Do you know where the engine serial number is located on the AD3.152 ? Thanks man!

[@FarmallFanatic]

Very nice! What are your plans with his tractor? Full view and like!

[@donaldhofman296]

I have that same ratchet and I love it!

[@travisricks3436]

Did you ever adjust the valves?

[@neintoten6155]

You completely skipped replacing the oil pan and dealing with the cracked block?

[@cheaphomesteading]

Here is the link thanks for watching Installing the oil pan on the Massey 231 /Perkins 152 engine. kzbin.info/www/bejne/bGOmdIGMo7t5fK8

[@neintoten6155]

@@cheaphomesteading - Thank you very much, Sir!

[@neintoten6155]

@@cheaphomesteading - Thank you very much! I must've missed it on the playlist. VERY helpful and much appreciated!

[@evonrichards1264]

I see you use a straight gasket but removed a cut off edge one

[@travisricks3436]

I am disgusted. I think the head gasket blew yesterday on my 1998 MF 231. White smoke everywhere and it never gave me an indication it was running hot until it was too late! Been a very good tractor to me. How expensive is this job? Thanks

[@cheaphomesteading]

It can Be a head gasket hard to tell without seeing it but if you have a bad injector you will have white smoke too. Is the coolest pushing out of the rad Or bubbles in the coolant with the rad cap removed. Make sure you take the cap off when the engine is cool you can get burnt. If that looks good I would loosen one of the injector lines at a time and see if the engine sounds different when loosed taking it and open another one and see if the engine runs differently till you do all do you injectors. If you find one that when you loosen off and the sound of the engine doesn’t change I would remove that injector get it checked.Hope this helps have a good one

[@travisricks3436]

cheap homesteading coolant is pushing out everywhere when I started it cold this morning when I took it off the trailer. No white smoke but coolant was blowing everywhere, from somewhere. It was difficult to start also. The engine wanted to “lock” as I was spinning it over to start it. I don’t see any signs that there is water in the oil.

[@cheaphomesteading]

It sounds like a he’d gasket. You probably have to pull the he’d off And take a look.

[@travisricks3436]

cheap homesteading I have a mechanic coming to look at it. If it’s the head gasket I found a Fel-Pro Top Gasket kit for the Perkins AD3.152 at my local O’Reilly Autoparts for $78. Part number HS21118C.

[@travisricks3436]

cheap homesteading Where can I purchase new head bolts? My mechanic looked at the tractor and it did blow the head gasket.

[@tymorgoodarzi8238]

Veri good tanku..

[@jimrerko3415]

You are so enjoy able to watch.

[@cheaphomesteading]

Thanks man

[@TheUltimate65]

Do not take out the valves fore replement the valve seals, , cleans the ports , valves and standing in the valves ,the job going fore the same the head its removed ..🤔

[@yaboygizzleyuppy6675]

You can't use that ruler to check that surface like that... Idk if it matters with that diesel so much... or even a gas engine cuz I'm learning, (I guess) but I know those parts probably have to be milled with truing tolerances set at least within .000" +/- .005"... js... I don't like fucking with engines except to change some big parts on some big big ones maybe, I really enjoy working as a heavy equipment mechanic, they're a rare breed and underappreciated... I mean I only know one real one and that's myself ... fuck an engi and a neer...

[@stevefuller1779]

Been doing them for almost 50 years, probably done a few hundred by now, using a straight edge to check the head is flat is fine, it ain't formula one! they rarely warp anyway, it is more important, on these engines to make sure the liners have not sunk too far below the block surface, most gasket failures on these engines are caused by sunken liners as they move about when the engine is running and wear the sealing rings, on the gasket, away.

[@travisricks3436]

@@stevefuller1779 do you like the Perkins AD3.152 engines?