No video

Checking and finishing up boxed butt joints. Hand finishing! Make them flat!

  Рет қаралды 1,335

Man with a Pan

Man with a Pan

2 жыл бұрын

Пікірлер: 12
@richardmartinez2476
@richardmartinez2476 2 жыл бұрын
great work im finisher 24 years im rarely impressed good teaching and demonstrating
@manwithapan
@manwithapan 2 жыл бұрын
Thanks man. I have been doing this for 27 years now. I’m 46 and my body doesn’t have any issues. I figure I am old enough now and have learned enough to show the younger generations there is money to be made of you can produce a nice product.
@user-fo4iv8he1f
@user-fo4iv8he1f Жыл бұрын
좋아요
@Tigerratcat
@Tigerratcat Жыл бұрын
Hi Leo Do you have any advice with painting after all the drywall finishing has been completed? I’m devastated that my ceiling square set corners are peeling when I spray and backroll. (I spent so much time getting them perfect) I think it’s dust but no matter if I brush, wipe with a cloth or vacuum, the sanded all purpose compound just keeps creating more dust
@manwithapan
@manwithapan Жыл бұрын
Dust shouldn’t create an issue with spraying an application. Most of the painters that paint behind us, use a high quality primer. So after you prime it, is the paint flaking off?
@Tigerratcat
@Tigerratcat Жыл бұрын
@@manwithapan I’m using a high quality water based sealer primer undercoat. Diluted 50:50 for a mist coat so it soaks in the mud. Sprayed looks great, then I backroll for better adhesion. It pulls off on some sections on my ceiling inside edges. As if the mud completely and cleanly rejects the primer. Other patches soak in nicely
@manwithapan
@manwithapan Жыл бұрын
@@Tigerratcat here are my thoughts again I don’t do this professionally, if paint is setting up a bit to long before back rolling, I know it will pull it off the mud. Whenever I have sprayed with someone, I backroll immediately after the other person is spraying. Paint is wet and can’t pull.
@manwithapan
@manwithapan Жыл бұрын
@@Tigerratcat The only times I’ve ever seen mud flake after being primed, it’s because it was damp. If this is happening to you quite a bit, I would check the product or have somebody get involved from the manufacture of the paint company. All primer for Drywall should bond
@Tigerratcat
@Tigerratcat Жыл бұрын
@@manwithapan That makes sense. I’ll keep at it and make sure backroll asap. Thanks for taking the time to respond. I really appreciate it
Part 1, Professional drywall finishing a Bad butt joint!
4:07
Man with a Pan
Рет қаралды 5 М.
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 97 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 31 МЛН
Fixing Cracks in Drywall Part 4:  coating taped cracks.
14:22
Man with a Pan
Рет қаралды 1 М.
Part 2, Level 5 finish explanation and demo.
13:26
Man with a Pan
Рет қаралды 1,6 М.
PART 2! Professional drywall finishing Bad Butt Joint final Coat!
3:53
HOW TO REMOVE BATH FOR WALK IN SHOWER - Step By Step
26:19
plumberparts
Рет қаралды 37 М.
Part 1!  Level 5 finish prep! Don’t use Mesh Tape!
5:00
Man with a Pan
Рет қаралды 3,3 М.
End of Epoxy Tables
30:04
Blacktail Studio
Рет қаралды 2,2 МЛН
Fixing Cracks Part 3:  tape over Durabond prep coat!
9:37
Man with a Pan
Рет қаралды 1,4 М.
How to Second Coat Drywall - 7 SIMPLE Steps for a Smooth Finish
10:34
Diego Lebaron
Рет қаралды 2,8 М.
How to Prep and Paint Baseboard Step by Step
29:33
Peak House Painting
Рет қаралды 42 М.
passo a passo   regulagem  flat box   chinesa  bumafer .
16:34
vem com pai que e sucesso!
Рет қаралды 4,9 М.
Why Is He Unhappy…?
00:26
Alan Chikin Chow
Рет қаралды 97 МЛН