Checking Out The AtomStack B3 Enclosure - On Board Camera, LED Lights & Fume Extraction

Рет қаралды 2,167

Күн бұрын

Пікірлер

@MCsCreations 10 ай бұрын

Fantastic review, Tomasz! 😃 Those enclosures are great! They help your eyes and lungs! Anyway, stay safe there with your family! 🖖😊

@CasualDIY 10 ай бұрын

Exactly and this one seems to be loaded with cool features

@stephensenior3589 10 ай бұрын

Out of all the lasers you have shown us This 1 with the enclosure will be best for the type of work I'll be doing thanks for showing this Tomaz 🤠

@CasualDIY 10 ай бұрын

And I think this is a great choice. I absolutely love this enclosure.

@almagill 10 ай бұрын

Another cracking review Tomas!

@CasualDIY 10 ай бұрын

Glad you enjoyed it

@johnpenman1548 10 ай бұрын

Hi Tomasz, A great review, and I am edging closer to having one but first I must build a fixed workbench at the back of my small workshop to accomodate the laser!

@CasualDIY 10 ай бұрын

Well I'm planning to make a full unit to accommodate my xTool and possibly one more 🤔

@dougdavidson175 10 ай бұрын

Nice review and kit. Still not on my radar as a purchase but I do hope you get lots of use from it. Take care & stay safe.

@CasualDIY 10 ай бұрын

Very nice kit indeed 👍

@wrightiow 4 ай бұрын

Excellent video, I have just fitted this enclosure and could not work out camera settings but you have helped buy confirming it’s a fisheye lens. When you celebrated the camera your numbering was upside down is that a setting I need to enable?

@CasualDIY 4 ай бұрын

No special setting, just went with the prompts.

@trevorwhite9138 10 ай бұрын

Can it cut 3mm ABS? Thinking about cutting holes in enclosures.

@CasualDIY 10 ай бұрын

Abs will tend to melt and release some harmful fumes. Don't recommend it

@trevorwhite9138 10 ай бұрын

I have read some say it melts others say it’s fine. Was thinking the enclosure and exhaust takes care of the fumes?

@CasualDIY 10 ай бұрын

@@trevorwhite9138 it does you will be polutting someone outside 😅

@trevorwhite9138 10 ай бұрын

@@CasualDIY yeah I suppose a Heppa? Filter would be required. I haven’t found much about these diode lasers and abs. Maybe it’s the fumes that puts everyone off. I have 500 enclosure lids to cut and currently do on a cnc but laser would be faster I thinm

@CasualDIY 10 ай бұрын

@@trevorwhite9138 Don't have too much experience with that. Not sure if a CO2 would be better for this. You need to get more research done on this topic.

@NathanTalbertWoodworking 10 ай бұрын

I wish this had been available when I set up my laser. the cheap (not cost wise) one that I picked up broke the second I set something on top of it. now its held together with the handymans secret weapon. I'm guessing you don't really smell anything underneath the edges while its running if it kept the entire thing that clear of smoke and smell when you opened it up afterward.

@CasualDIY 10 ай бұрын

No you don't smell anything as it operates. Just keep it closed about 10 seconds after the job is finished. When you open it you will be able to smell it slightly as the residue builds up on the walls of the enclosure. Bit overall it's not bad at all.

@ThereIsProbablyNoGod 5 ай бұрын

Great review. I am considering buying the A24pro with the enclosure. I have a question regarding the camera. Is there a way to connect the camera over Wifi or just via USB? I gues the enclosed camera is usb only, but is there any useful Wifi camera that could be used? I plan to operate the A24 in a workspace where I do not have a computer nearby. As far as I found out so far, it is possible to operate the Laser via Wifi (I hope that's true) but would be great to have the same for the camera.

@CasualDIY 5 ай бұрын

@@ThereIsProbablyNoGod its USB only unfortunately

@ThereIsProbablyNoGod 5 ай бұрын

@@CasualDIY Thank you for the quick answer.

@adlapl 5 ай бұрын

I have this laser and it is great for what laser does :) and speed. But! You have not mentioned that cover is really heavy. That is why I installed front plate permanently. Then I have cover only from top - it is one plate only. It is very easy to open and it is light. Of course you do not have then, this "alarm" on open. Who cares. Also power supply to fan should have an individual switch. I will do this mod myself. Instead, you are provided with Y splitter 24V cable, with one switch for both! i.e. laser and a fan. It is noisy on starting up. I think in your movie - after connecting a laser to power you just disconnected mentioned Y cable from the fan to have no noise in a background. kzbin.info/www/bejne/npbSlpKImZuao9U Finally you cannot print via WiFi from PC, only from mobile. Review should be balanced in pros and cons, not to be a "promo".

@CasualDIY 5 ай бұрын

I didn't mention its heavy as I don't find it heavy. I think that's something will find out personally. Not sure if I understood you well, but instead of having a full enclosure you now have just front top and back? With the power to the fan that is correct I just pull the connection out, would be better with some sort of a switch. I guess they done that as its easy to forget to turn the fan on. I've done that multiple times with other machines. And this video is not a review, its an overview- basic information on the product.