Checksum correction with ECM Titanium

[@antondj3151]

what if they not found Driver on 02:20 ? May this a Problem?

[@mancarcoding8178]

so which did you upload to car? CS ok file Or the CS ok SELECTED file?

[@manuelra84]

Is the same. One file is created automatically and the other one manually

[@mhakim3338]

Thank you friend ! Thank you very much. Good good channel.

[@SimpleHOW]

Thanks

[@joshuagrams8033]

Hi, do u have the driver for ecu17ec44? My ecm titanium does not have that one and I can not download it.

[@SimpleHOW]

Downloading drivers for ECM Titanium can just with original software.

[@asimk9518]

What’s that story about clone kess 2 and check sum and ecu bricking? I was planning to use kess 2 to read file, delete egr / dpf using ASD and write file back on ecu using kess 2 clone? It’s for bmw f30? Is that safe to do? Or do i have to load file in this program and do checksum correction

[@alexandrupana800]

Don 't use kessv2 on f30, you will brick the ecu... Kess V-2 for edc17 is not good... Too old.. use a KT200II or pcm tuner.. or better than all, autotuner, flex, dfox

[@SimpleHOW]

@@alexandrupana800 Perfect answer 👍

[@TONIWA112]

is it necessary to choose the correct driver? Or does not it matter? Thank you

[@SimpleHOW]

Need choose driver as you ECU, but if not find that, than can try similar drivers.

[@TONIWA112]

@@SimpleHOW ok thank

[@antondj3151]

@@SimpleHOW oh okay i Found a Solution Thanks, but another quastion, showed a software error when i choose a wrong driver?

[@norbertsvab]

Hello you can help to my how can i check the car whp after remap? how can i calculat it or some programs are calculate automaticli?

[@SimpleHOW]

All programs calculate the checksum, but not for all ECU. First, check if your program can calculate the checksum for this ECU.

[@abenew2010]

Can I use this software on motorcycle ?

[@SimpleHOW]

I not try, but You can try 🙂

[@danrs33390]

Good job .

[@SimpleHOW]

Thanks ☺

[@06sy245]

chechsum RED no green ?

[@SimpleHOW]

If red color then not correct checksum, when green color - checksum ok.

[@06sy245]

@@SimpleHOW thanx bro 👏🏻👏🏻👏🏻

[@kelvisonnet]

Which of the files am I supposed to write into the Ic ? Among the modified ones

[@SimpleHOW]

In the car ECU need write file with correct checksum. But if softwares (Ksuite, FGTech Galletto, MPPS or other) can calculate self checksum, then not need manually corrected checksum.

[@-vis4r576]

yes but the CS OK or the CS OK SELECTED?@@SimpleHOW

[@SimpleHOW]

@@-vis4r576 For compare, "cs ok" software self calculate and "cs ok selected" manual select driver for cs calculated.

[@ecuperformance959]

Only a question if i flash with galletto 1260 and tune the file from ecm titanium it will be problem for ecu?

[@SimpleHOW]

No, not have problems ☺

[@ecuperformance959]

@@SimpleHOW thanks

[@giuseppepellegrino6385]

Good good job.👍

[@SimpleHOW]

Thanks 👍

[@EvoGTR33]

how do you make dpf off files ?

[@SimpleHOW]

What car, engine and years?

[@EvoGTR33]

@@SimpleHOW every car , edc16

[@EvoGTR33]

@@SimpleHOW what program did you use ?

[@SimpleHOW]

@@EvoGTR33 with program just little car can do it, other do it with WinOLS.

[@aspalrawat9736]

Dear will you provide me this software

[@SimpleHOW]

I buy from Ali, link in description.

[@Evasusingdaddysaccount]

Do you have the checksum activated software? Or is this a hack cheers

[@SimpleHOW]

Sofware from link in descriptions :-)