Give Your Paint Gloss, Depth and Slickness! - TORQ 22D Polisher: bit.ly/3MH5nS4 - Wet Mirror Finish: bit.ly/3ONhCz2 - JetSeal: bit.ly/3WF8b6R - Synthetic Quick Detail: bit.ly/3WGybyy
@putopoveda3 жыл бұрын
Used all three on my brand new black 2022 Ram 3500 dually. Wow the paint looked wet, crazy shine, and made huge difference in attracting dust. Looked even better the next day after it cured and no dust on it.
@ChemicalGuys3 жыл бұрын
Happy detailing!!
@aimized14602 жыл бұрын
Will this method protect my car against water spots and dirt ? I washed my car yesterday, clay barred it and polished some panels only for it to rain and all my work is ruined…
@jmc4975 Жыл бұрын
@aimized1460 You always need to use a paint sealant and/or wax after polishing, and if you don't protect your work, then you're leaving it open to even more contamination.
@gbthegreat4 жыл бұрын
What speed was jet seal applied? Dial the polisher to 1-2? A much needed video. Love my black BMW but it’s a lot of work.
@ChemicalGuys4 жыл бұрын
Hey! When applying a glaze, sealant, or wax, we recommend applying it on speed setting 1. Thanks for watching and happy detailing!
@endyvaldovinos81343 жыл бұрын
@@ChemicalGuys do you apply 5 lbs of pressure as well?
@chrisbatson34023 жыл бұрын
Black cars are always work. Because every spec of dirt shows on the black color. I have a black bmw and silver mini
@Monster333363 жыл бұрын
These guys are snake oil salesmen. Their stuff dont really work
@SergioHernandez-zv5wc3 жыл бұрын
@@Monster33336 false there products do work well. I’ve been using them for years before they became Walmart famous or even KZbin famous. Used to go to their shop in LA all the time
@kylebazzar79943 жыл бұрын
If I knew what I was getting into before getting my black car, i wouldn’t have gotten a black car 😭
@ChemicalGuys3 жыл бұрын
Hey! The finished result is well worth the process. Happy detailing!
@noelsaw3 жыл бұрын
It’s def a lot of work but with it in the end (4 hrs later) 😂
@colorcodetrader40323 жыл бұрын
Ceramic coat or clear wrap that black beauty.
@unixdoes3 жыл бұрын
no color looks better. perfection takes work.
@LightofDeneb3 жыл бұрын
@vertz, same here. It is so much work. First and last black car for me.
@ivorwm2291 Жыл бұрын
Just got a 2012 MX-5 that is black. She will look great. Thanks
@ChemicalGuys Жыл бұрын
Enjoy your detailing products!!
@miltonjasso58433 жыл бұрын
My Bens most needed video !!! THANKS AGAIN GUYS !!!
@ChemicalGuys3 жыл бұрын
Hope you enjoyed it!
@cocoyummy4 жыл бұрын
Great video we need Nooners with Nick to make a come back!!!
@ChemicalGuys4 жыл бұрын
Hey! Thanks for watching and I will pass this onto the correct department.
@CarlosAguilar-dj4ph3 жыл бұрын
This is a all day thing! Well guess I’ll be spending my whole Sunday in the garage
@ChemicalGuys3 жыл бұрын
Enjoy your detailing products!
@brianramirez25193 жыл бұрын
Like a man should
@CanadianCruisin4 жыл бұрын
Just did a ceramic coating video on my mustang using all the chemical guys products. Turned out great.
@demigodq60834 жыл бұрын
So at what point do you add a ceramic coat
@Piedmont574 жыл бұрын
DemigodQ60 ! Right after correction/polish
@ChemicalGuys4 жыл бұрын
Hey! Thanks for the amazing feedback!
@CanadianCruisin4 жыл бұрын
@@ChemicalGuys best products out right now.
@RossCearlock2 жыл бұрын
Thanks for this video! I bought everything in this video and plan to use it on my new to me 2017 Black Ford Expedition XL Limited. its gonna take some time but it will be worth it. then to cancel my monthly automatic car wash subscription and try to break that habit. No more squirrel marks for me. Will be getting all the fun things for car washing soon as well... power washer, air cannon etc. Been watching your videos for months now. Great content!
@ChemicalGuys2 жыл бұрын
😃 Enjoy your detailing products!!
@rodm23452 жыл бұрын
Need an update how did it go?
@JoeMaxFpv Жыл бұрын
Way much more better 🤔. Great video. Not so much on the quadruple negatives. 😂. But seriously. Helpful.
@stingk5295 Жыл бұрын
Awesome from Florida!
@ChemicalGuys Жыл бұрын
Thanks so much for tuning in!
@alexmorales79774 жыл бұрын
After this detail. What products should you use you to regularly wash and maintain a black car?
@ChemicalGuys4 жыл бұрын
Hi Alex! After the vehicle is coated, you can use your favorite car wash soap to enhance and maintain a brilliant shine.
@lwill21914 жыл бұрын
So the order is is wax, glaze, and sealant? A detail garage store told me it was glaze, sealant, then wax.
@ChemicalGuys4 жыл бұрын
Hey there! Following the Chemical Guys detailing flowchart, we recommend to apply glaze, sealant, and wax in that order. Check out this video. - CG Nick kzbin.info/www/bejne/aIjCaJ-cqr2MgtU
@lawdawg783 жыл бұрын
They were correct
@lauderdale77 Жыл бұрын
Just bought a black Tacoma and Challenger so thanks for the video.
@ChemicalGuys Жыл бұрын
Thanks so much for tuning in!
@sld2155 Жыл бұрын
How about dong a video on how to clean and reuse the pads????
@ChemicalGuys Жыл бұрын
Hey! Check out this video. kzbin.info/www/bejne/q2KbqKiFqZaUg9Esi=mDs-ceLwwSx93Hdb
@krispassmore3 жыл бұрын
If I want to apply a ceramic coating, glaze, sealant/wax, how long do I wait in between each application before applying the next product? Don’t you have to wait at least a few hours for the ceramic coating to cure before applying another layer of protection? And does that apply for each product? Or can I apply the sealant or wax immediately after the glaze?
@ChemicalGuys3 жыл бұрын
Hey Kris! After applying ceramic, allow at least 3 hours before applying glaze, sealant, and/or wax which can then be applied almost immediately after each other.
@MoparCrazy8032 жыл бұрын
@@ChemicalGuys Ceramic coat before wax, glaze or sealant? I was thinking ceramic coating was like a last finishing product. I should write this stuff down.
@fabricioescobar49614 жыл бұрын
Awesome vid, I have a Black SS Camaro and this was very informative thanks! Is regular clay bar best? I have the synthetic made one...
@ChemicalGuys4 жыл бұрын
Hey! Yes, that clay will be perfect. Thanks for watching and thanks for being part of the Chemical Guys family!
@1990Neman4 жыл бұрын
It was a great video. One question: can I apply ceramic coating at the end?
@ChemicalGuys4 жыл бұрын
Hi there! After polishing the vehicle is when you would want to apply your favorite ceramic coating. It can then be layered with glaze, sealant, and/or wax if so desired. - CG Nick
@1990Neman4 жыл бұрын
@@ChemicalGuys That's great. Thank you so much. You have wonderful contents. I will do all these steps on my car.
@nicky859262 жыл бұрын
@@ChemicalGuys so do you use a pad to add the ceramic coating?
@rickjorstad60702 жыл бұрын
Great video! Thank you for the great tips in order to keep my black ride looking great!
@ChemicalGuys2 жыл бұрын
Happy detailing!!
@johlou83294 жыл бұрын
Say you’d want to apply HydroSlick ceramic coating on this black car. Would you apply it before or after Jet Seal?
@ChemicalGuys4 жыл бұрын
Hey! We recommend applying HydroSlick before Jetseal. Thanks for watching and happy detailing!
@loganpayer4 жыл бұрын
Can you apply hydroslick ceramic liquid wax then top it with butter wet wax for the warm glow that carnuaba gives
@meanf15024 жыл бұрын
Jet seal after a good clay bar if needed if needed rub it out if not jet seal an then hydroslik it
@ChemicalGuys4 жыл бұрын
Hey! We recommend applying HydroSlick after polishing. Thanks for watching and happy detailing!
@grgygantz6760 Жыл бұрын
So they aren’t using any type of a pad lubricant. At this time? I noticed in several videos done by Nick that he all most all ways uses a pad lubricant.
@wampa66752 жыл бұрын
Your products are incredible
@ChemicalGuys2 жыл бұрын
Thanks so much for being part of the Chemical Guys family!
@broccolihart18 ай бұрын
Is the glaze better for a vehicle that will be parked outside?
@jonyavila82624 ай бұрын
What if it's a white color car. What color clay should I use?
@yolandafonseca59002 жыл бұрын
Can you do the final polish by hand?
@ChemicalGuys2 жыл бұрын
Absolutely!
@kitmummegknowles1712 Жыл бұрын
My car is a super dark blue. Will this routine still suit?
@hectorhermosillo89192 жыл бұрын
Hi i have a black with metallic flakes very nice color i want to know if i apply this clay bar process can i apply then black light glaze to enhance the metal flakes and then carnauba wet wax to protect the finish. Thanks
@ChemicalGuys2 жыл бұрын
Absolutely, that is correct!
@LightofDeneb2 жыл бұрын
So, at what point would I apply the "Black Light" hybrid radiant finish in this process? Does it replace anything in the video like the Wet Mirror finish or is the Black Light applied in addition to everything else? If Black Light is applied instead of Wet Mirror, does the Jet Seal still go over the Black Light? Please help.
@ChemicalGuys2 жыл бұрын
Hi there! Black Light and Wet Mirror Finish are glazes which would be applied before sealant and/or wax.
@LightofDeneb2 жыл бұрын
@@ChemicalGuys I appreciate the response, but it didn’t answer the question I posed.
@CertifiedBryansito2 жыл бұрын
@@LightofDeneb black light replaces wet mirror finish
@Slugworth882 жыл бұрын
Fantastic work. Could ask a question Once all these steps are completed If I want to wash my car again after say a week do I need to repeat each process step by step, or what steps should I apply for tops up? Also just wondered can I repeat all the steps you've shown, how often? or can it be completed as you've shown weekly from stop one, straight through Thank you and most appreciated
@ChemicalGuys2 жыл бұрын
Hey! Thanks so much for your message. It is not necessary to repeat these steps before your weekly wash, simply use your favorite car wash soap to maintain a clean finish. Clay bar the vehicle at least twice a year or as needed depending on the look and feel of your paintwork.
@codding586 ай бұрын
How often do you repeat this process? If my car is Ceramic coated, can this go over it, or do I need to buff it off?
@dietfrenchtoast4 жыл бұрын
Would you recommend applying the Butter Wet Wax after the Jet Seal? Or just use the Quick Detailer after the Jet Seal?
@ChemicalGuys4 жыл бұрын
Hey! We recommend applying Butter Wet Wax after Jetseal. Thanks for watching and happy detailing!
@banette364 жыл бұрын
You Guys' make me won't to open up a detail shop !!
@ChemicalGuys4 жыл бұрын
Thanks so much for being part of the Chemical Guys family!!
@hilyfe5690 Жыл бұрын
What kind of polish machine is that !? Is there a certain way to use the polisher , I want to do this process to my black car
@ChemicalGuys Жыл бұрын
Hey! Check out the TORQ 22D!! www.chemicalguys.com/torq22d-polisher/torq22d-polisher.html
@justinwhitehead61813 жыл бұрын
This video was awesome! Thanks so much Joey!
@ChemicalGuys3 жыл бұрын
Glad you enjoyed it!
@CarlosGarcia-mo4gi4 жыл бұрын
Before anything great videos! Question. Should i do this after washing my car ? Or before?
@ChemicalGuys4 жыл бұрын
Hi Carlos! We're so glad you're enjoying the videos. It would be best to wash the vehicle first then clay and continue with the detailing flowchart. - CG Nick
@mariosabala38114 жыл бұрын
Will i apply clay luber for car glass/windows before applying jetseal??
@AyzaG2002 Жыл бұрын
I was waiting for curves polishing with orbital at that point but you skipped clip 😅; however great thanks for sharing your knowledge 🙏.
@ChemicalGuys Жыл бұрын
Thanks so much for your feedback
@eduardogomez3456 Жыл бұрын
How cold is too cold for applying compound/polish indoor ?
@ChemicalGuys Жыл бұрын
Hey! If the temperature is freezing it is too cold.
@GregoryFarrow Жыл бұрын
This might be a dumb question, but I'll ask anyways. What do you do when you get to the logos and badging on the vehicle you are detailing? On my truck I have in large letters RAM on the tailgate. Do I just polish over it? Thanks for any feed back
@ChemicalGuys Жыл бұрын
Hi Gregory! Try masking off trim and badges before polishing.
@054103452 жыл бұрын
Hi there. Amazing explanation. Can the Synthetic Quick detailer be used when we dry the car after washing it?? Many thanks
@ChemicalGuys2 жыл бұрын
Yes, absolutely!!
@iantolentino74014 жыл бұрын
Watching from the Philippines 🖤🖤. I hope I can use some of your products 🙁🙁🙁
@ChemicalGuys4 жыл бұрын
Greetings from Southern California!!
@doeyjiaz47984 жыл бұрын
If you have any friends or family in North America, they can ship it from here if you cant buy it at home
@fdude5554 жыл бұрын
Lots of other products here in the PH as good or better than chemical guys. Dont buy into the hype man.
@jsmith78704 жыл бұрын
buy them from amazon
@johnkent68662 жыл бұрын
I have a dark gray metallic color what’s best for metallic colors ?
@ChemicalGuys2 жыл бұрын
Hey! Check out this kit to maintain a deep gloss. www.chemicalguys.com/the-complete-black-car-care-detailing-kit/VIR862.html?gtmListValue=Internal%20Search
@barn59233 жыл бұрын
What's the best wax to wax the plastic bumper on a black car
@ChemicalGuys3 жыл бұрын
Hey! Check out Butter Wet Wax to add gloss and protection to any surface that is shiny or clear.
@jasonrisling24434 жыл бұрын
I use a bunch of your products d/ which are awesome. Do you have a ceramic coating available? What's your thoughts on ceramic sprays?
@ChemicalGuys4 жыл бұрын
Hey! We recommend HydroCharge, it is the easy-to-use SiO2 ceramic spray coating that delivers a brilliant high-gloss candy shine, extreme hydrophobic properties, and the durable protection of a ceramic coating with the ease of use and speed application of a spray. www.chemicalguys.com/hydrocharge-high-gloss-hydrophobic-sio2-ceramic-spray-coating/WAC23016.html
@annberlin58112 жыл бұрын
Thank you my vw bug is black and its scary to wax
@ChemicalGuys2 жыл бұрын
Happy detailing!
@bjimsondetailing2 жыл бұрын
why do you buff off the polish with a micro fibre towel and not the polisher
@ChemicalGuys2 жыл бұрын
Hi there! It is safer and more effective to use a clean microfiber towel to remove spent product.
@user-in8xx1xu5b3 жыл бұрын
Do you wash and dry the car before applying the clay bar?
@ChemicalGuys3 жыл бұрын
Hey! Yes, it is important to wash the vehicle before using a clay bar.
@kuinagel3 жыл бұрын
At what point would you apply the ceramic coating? And how long does the protection last on the work you just completed in this vid? Thank you!!
@ChemicalGuys3 жыл бұрын
Hi there! Once the the vehicle has been washed, clayed, and polished(if necessary) it can be ceramic coated.
@kuinagel3 жыл бұрын
Ok thx. You would happen to have a “new black vehicle ceramic start to finish” video do you? This one was a good one. Just didnt know if the glaze is needed or the final two steps.
@PatricksDIY2 жыл бұрын
Wish I knew what I did wrong on my car, After polishing using C4 my Black hood now has a "buffing pattern" down the entire hood, almost looks like streaks but the size of a buffing pad.
@ChemicalGuys2 жыл бұрын
Hey Patrick! Follow up with P4 and a White Hex-Logic Pad to remove holograms and buffer trails.
@grgygantz6760 Жыл бұрын
Check out their black car kit.
@ChemicalGuys Жыл бұрын
🤩🤩
@GlideST3 жыл бұрын
How many bars would I need for a whole car/small truck?
@ChemicalGuys3 жыл бұрын
Hi there! One clay bar can decontaminate several average size vehicles.
@Doughboy-818-2 жыл бұрын
How long does that protection last or how often should I apply those glazes and coats
@ChemicalGuys2 жыл бұрын
Hi Raul! JetSeal lasts up to 12 months and glaze will only bond for a few months however both can be applied as often as desired.
@steveflynn25713 жыл бұрын
Pretty slick work 👌
@ChemicalGuys3 жыл бұрын
Happy detailing!!
@bailsinthehills3 жыл бұрын
Would you recommend compound first on black paint that looks horrible? Swirls scratches etc.
@ChemicalGuys3 жыл бұрын
Hi Josh! After washing and clay barring the vehicle, inspect the paintwork to determine which combination of pad and chemical is necessary. For heavy imperfections, I recommend using an Orange Hex-Logic Pad and V34 Hybrid Compound.
@raiderz4life4212 жыл бұрын
What soap should use to wash it? Does it need to be soap with no wax in it?
@ChemicalGuys2 жыл бұрын
Hey! Use any of your favorite Chemical Guys car wash soaps to lay down thick suds such as Sticky Snowball Snow Foam to maintain a beautiful gloss.
@raiderz4life4212 жыл бұрын
If I want to clay bar, what soap do I use prior to clay baring it
@JLNeis2 жыл бұрын
I NEED TO FIND SOMETHING TO GET LITE SCRATCHES OFF MY GLOSS BLACK FACTORY WHEELS. I HAVE TRIED ALMOST EVERYTHING AND NOTHING SEEMS TO WORK, ANY HELP WOULD BE APPRECIATED.
@ChemicalGuys2 жыл бұрын
Hi there! Try using V36 Cutting Polish to remove light swirls and scratches.
@jeffneis5532 жыл бұрын
@@ChemicalGuys Is V32 the strongest? I tried all sort of compounds even RUBBING COMPOUND, no luck. They look like spider webbing not deep but they dont want to come off.
@Widowmaker13202 жыл бұрын
Great video! How often do you add the product to the polishing pad? What size pad should I use for my challenger 1320 Scat?
@ChemicalGuys2 жыл бұрын
Hi Bob! Reapply polish to your pad after every two foot by two foot section. Glaze, sealant, and wax spread very fine with a machine so reapply as necessary.
@luismarquez466 Жыл бұрын
Wonder if this applies to black cherry?
@ChemicalGuys Жыл бұрын
Absolutely!
@smokeyjoe40602 жыл бұрын
So what all detail treatment would you recommend after ceramic coating a black vehicle?
@ChemicalGuys2 жыл бұрын
Hey! Check out HydroSuds and HydroSpeed to maintain and boost ceramic coatings.
@ScorpioPDX3 жыл бұрын
Should I apply these products after or before Hydroslick?
@ChemicalGuys3 жыл бұрын
Hey! Apply HydroSlick to a bare surface and then it can be layered with glaze, sealant, and/or wax.
@thr652 жыл бұрын
Can glaze be applied after any jet seal or wax as my car was polished using V38 and jet sealed
@ChemicalGuys2 жыл бұрын
Hi there! Glaze can be applied after sealant and wax however for best results we recommend applying glaze to a bare surface before sealant and/or wax.
@colin74692 жыл бұрын
Can I wash with your waterless wash and wax prior to the claybar?
@ChemicalGuys2 жыл бұрын
Absolutely, it is perfectly fine to use waterless wash to prep the surface for a clay bar treatment.
@rogernasiols4 жыл бұрын
How long would you wait between applying the gloss and the sealant?
@ChemicalGuys4 жыл бұрын
Hey! We recommend allowing 15-20 minutes to pass in between application. Thanks for watching!
@howlurt874 жыл бұрын
Is that a orbital or rotary polisher?
@ChemicalGuys4 жыл бұрын
Hey! The TORQ 22D is a random orbital polisher with a 21mm throw to cover large flat panels very quickly. - CG Nick
@bjimsondetailing2 жыл бұрын
will the clay bar remove water spots on black pants
@ChemicalGuys2 жыл бұрын
Hey! A clay bar can remove recent water spots. Check out Heavy Duty Water Spot Remover for tough stains.
@daniellaherrera53334 жыл бұрын
What do you guys use for the black rims to clean and maintain them?.
@ChemicalGuys4 жыл бұрын
Hey! We recommend Diablo Wheel Gel, it is a pH-balanced wheel and rim cleaner that uses gentle oxygen infused foam to safely clean any shiny wheel finish. This non-caustic formula is perfect for weekly maintenance washes! www.chemicalguys.com/diablo-gel-oxygen-infused-foam-wheel-and-rim-cleaner/diablo-wheel-gel.html
@daniellaherrera53334 жыл бұрын
@@ChemicalGuys do you guys have a video for this ?
@zensei51582 жыл бұрын
Just bought a 22 GR 86 in Raven Black (my first black car) I wash it almost weekly with your guys products but I was wondering if you guys have a specific kit I can buy for black?
@ChemicalGuys2 жыл бұрын
Hey! That's awesome, check out the Black Car Car Kit to clean, enhance, protect and maintain a deep gloss. www.chemicalguys.com/black-car-care-kit/HOL203.html?gtmListValue=Internal%20Search
@darlabbyy2 жыл бұрын
after all these steps, can i apply ceramic coating a day after or it has to be done right away?
@ChemicalGuys2 жыл бұрын
Hi Darla! For best results we recommend to apply coatings as soon as possible however it is perfectly fine to do so the next day as long as the vehicle is kept dry and clean.
@charlestonna2636 Жыл бұрын
You have to enjoy it I do mine twice a year and u need the chemicals and polisher
@mariomeza34084 жыл бұрын
Should I add a six inch back plate to my torqX?
@ChemicalGuys4 жыл бұрын
Hi there! Adding a 6 inch backing plate to your TORQX will help to cover more surface area and reduce polishing time.
@pierrejacoub87783 жыл бұрын
can I use the V38 on the high gloss finish on the B-pillar?
@ChemicalGuys3 жыл бұрын
Hey Pierre! Absolutely, use V38 to refine light imperfections and enhance gloss.
@victormarques87344 жыл бұрын
So after all that can you apply ceramic coating on top off everything you just did ?
@ChemicalGuys4 жыл бұрын
Hi Victor! When using a ceramic coating it is best applied to bare paint after polishing. It can then be layered with your favorite glaze, sealant and/or wax. - CG Nick
@jonathanmariani56272 жыл бұрын
How many pads should you use when polishing your car
@ChemicalGuys2 жыл бұрын
Hey Jonathan! It is recommend to have at least two of the same color pad for a polishing job.
@brandonbeznoska2 жыл бұрын
Will the jet seal & the glaze prevent swirls? Thanks!
@ChemicalGuys2 жыл бұрын
Hi Brandon! Glaze and sealant will add depth, gloss and protection against harsh UV rays however a ceramic is what adds abrasion protection against scuffs and scratches.
@enriqueflores41372 жыл бұрын
How often do you need to do this detailing??
@ChemicalGuys2 жыл бұрын
Hi Enrique! Glaze, sealant and wax can be reapplied as often as desired to maintain gloss and protection. Paint correction should only be performed as needed.
@enriqueflores41372 жыл бұрын
@@ChemicalGuys okay because i also seen the video where hes washing the black lexus with the arsenal builder kit. And i have a brand new 2022 black car and i want to maintain it clean without giving it those scratches. What would be the best thing to do?
@LiL13izzy73 жыл бұрын
Nice fj40 back there!
@ChemicalGuys3 жыл бұрын
Thanks so much for watching. Check out this link! kzbin.info/www/bejne/babUYoGupJyNe6M
@Ldamian114 жыл бұрын
How often would you suggest to do this process?
@ChemicalGuys4 жыл бұрын
Hey! We recommend repeating this process every 6 months. Thanks for watching and happy detailing!
@eternalvenom93594 жыл бұрын
Which pad do we use for applying glaze, sealant or wax? Can we use the same pad for the 2 or the 3 of them?
@ChemicalGuys4 жыл бұрын
Hey! We recommend applying glazes with a blue pad and use a black pad for sealants and waxes. Thanks for watching and happy detailing!
@miamimotogroup53712 жыл бұрын
Do you guys recommend anything for harley wrinkle black engine paint. Want to keep it clean and protect it from fading? Will this product work?
@ChemicalGuys2 жыл бұрын
Hi there! Safely clean and protect the surface using Meticulous Matte Spray Sealant. www.chemicalguys.com/meticulous-matte-detailer/meticulous-matte-detailer.html?gtmListValue=Internal%20Search
@Wispysaur3 жыл бұрын
When your polishing with v34 do you need to polish with v38 after too
@ChemicalGuys3 жыл бұрын
Hi there! Yes, it is necessary to refine V34 with V36 and/or V38.
@santiagosanchez56103 жыл бұрын
Can I use hydro slick with jet seal ?
@ChemicalGuys3 жыл бұрын
Absolutely! Apply HydroSlick before adding JetSeal.
@deesiboo3 жыл бұрын
What polisher is that ?
@ChemicalGuys3 жыл бұрын
Hi Desiree! Check out the TORQ 22D. www.chemicalguys.com/torq-torq22d-random-orbital-polisher-kit-9-items/BUF502X.html?gtmListValue=Internal%20Search
@mariomeza34084 жыл бұрын
Thank you very much! Helped out a lot!
@ChemicalGuys4 жыл бұрын
Thanks for watching and happy detailing!
@coly02263 жыл бұрын
How often would you want to clay bar a vehicle?
@ChemicalGuys3 жыл бұрын
Hey! Use the clay bar as necessary, at least twice a year is recommended to maintain a smooth finish.
@MrPockets7184 жыл бұрын
I just got my car repainted. Should I use jet seal first then hydroslick wax or what steps should I take?
@ChemicalGuys4 жыл бұрын
Hey! We recommend allowing 4-6 weeks to pass before applying anything. Once the paint is fully cured, we recommend applying HydroSlick first, then follow it up with Jetseal. Thanks for watching and happy detailing!
@reggiedwyer14616 ай бұрын
Thankyou very satisfying
@ChemicalGuys6 ай бұрын
Glad you enjoyed the video!
@LoneStarStinger2 жыл бұрын
Any tips for handling tree sap?
@ChemicalGuys2 жыл бұрын
Hey! Check out the natural cleaning oils of Butter Wet Wax to gently scrub away stubborn tree sap. www.chemicalguys.com/butter-wet-wax-warm-and-deep-carnauba-shine/butter-wet-wax.html?gtmListValue=Internal%20Search
@gaberivera72284 жыл бұрын
Do you have to polisher after a clay bar or is that an optional step?
@ChemicalGuys4 жыл бұрын
Hey! If your paint is scratched and swirled, we recommend polishing it. If your paint is not scratched and swirls, you may skip the polishing step. Thanks for watching and happy detailing!
@tonyg.26153 жыл бұрын
Can i still apply the butter wet banana wax?
@ChemicalGuys3 жыл бұрын
Absolutely!!
@SATXrattlesnake4 жыл бұрын
I have a lithium grey F150, which product do you recommend for long lasting shine?
@ChemicalGuys4 жыл бұрын
Hey! We recommend Black Light, it is pure eye-candy for black and dark-colored cars. The amazing hybrid glaze adds tons of deep wet shine, fills in minor imperfections, and lays down a layer of durable sealant in one step! www.chemicalguys.com/black-light-hybrid-glaze-and-sealant/black-light-glaze.html
@gabrielarias73862 жыл бұрын
How highly is recommended this process to a bran new black car
@ChemicalGuys2 жыл бұрын
Hey! Even brand new vehicles can use a decontamination with clay bar.
@semosigtau14 жыл бұрын
Is your Blacklight product considered a glaze, polish, or sealant?
@ChemicalGuys4 жыл бұрын
Hey! Black Light is a glaze. Thanks for watching and happy detailing!
@vic18623 жыл бұрын
Does this process work for every color?
@ChemicalGuys3 жыл бұрын
Hi there! Yes, this exact process can be used for any gloss finish paintwork.
@rudychavez73134 жыл бұрын
What pad would i use for v36
@ChemicalGuys4 жыл бұрын
Hey! We recommend the White Light Polishing Pad, it finishes to restore reflection, clarity, and depth after cutting away heavy defects with a cutting pad, comes in 4”, 5.5”, 6.5” and 7.5" sizes, and vented and unvented form. www.chemicalguys.com/white-hex-logic-light-medium-polishing-pad/hexlogic-white.html
@joecobra49053 жыл бұрын
Can you use a wax instead of jet seal.
@ChemicalGuys3 жыл бұрын
Hey! Yes, you may wax instead of Jetseal. Thanks for watching and happy detailing!
@jonmcknight79002 жыл бұрын
I just bought a 2021 black Denali GMC truck and looks great except when the sun is shining on it. During the afternoon hours , you can see fine light scratches and buffer marks. I don’t want to use a buffer. Do you have products I can use to remove by hand. I didn’t see them in the late afternoon when I started applying mcguires ceramic wax. I would like to buy your products if you think I can do it by hand and elbow grease. Thank you in advance.
@ChemicalGuys2 жыл бұрын
Hi Jon! It is possible to polish by hand using a fine polish such as V36 Cutting Polish with an Orange Hex-Logic Hand Cutting Pad. www.chemicalguys.com/hex-logic-orange-cutting-hand-pad/BUFX_201.html?gtmListValue=Internal%20Search
@arnold43404 жыл бұрын
Great video, I have a black Camry and polished it with v38 last April, it’s a daily driver so I can see light scratches, would like to know if I can use v 38 every 4 months?
@ChemicalGuys4 жыл бұрын
Hey! We recommend V36 Optical Grade Cutting Polish and you can do it every 6 months. V36 Optical Grade Cutting Polish is the great all-around cutting-polish that eliminates light to moderate paint defects and imperfections from all paint types, then finishes like a fine polish. www.chemicalguys.com/v36-optical-grade-cutting-polish/v36-cutting-polish.html
@bryancabadas27654 жыл бұрын
What speed did you put the jet seals at?
@ChemicalGuys4 жыл бұрын
Hi Bryan! Use the lowest speed setting with a finishing pad to apply glaze, sealant, and wax. - CG Nick
@danielbell97792 жыл бұрын
What kind of scares me about using the V line is you said on another video that some of the clear coat is removed in the process.
@ChemicalGuys2 жыл бұрын
Hi Daniel! Yes, polishing will remove a very fine amount of clear coat to refine the surface and thus remove scratches and swirls.