Cherry Bomb Glasspack installation 5.7 Escalade/Tahoe

Here's the link to the glasspacks, they're a lot cheaper the interweb' compare to a auto store.
amzn.to/2sSKiJy

[@atypical_moto]

I busted up laughing when you started using the sawsall. Put the base against the pipe bro 😂

[@bonedaddy8810]

😂💀

[@bonedaddy8810]

That shit was bouncing hard af

[@bebe3442]

He said Chevy Escalade 😂

[@hunterlucas7685]

I was thinking that too

[@famousgilbert4401]

I mean he's not wrong tho 🤣😂

[@donyailposey6133]

DUDE WTF, IM STILL LOST

[@OfficialKmAudio]

🙉

[@glitterydory3488]

Lol because thats what it is 😂

[@Scrapper_142]

It was so hard watching him cut the exhaust Edit: This whole video looks like a Jeff Foxworthy skit

[@andrewpatillo7042]

These are some smart guys, they are actually using their brain and figuring out a way to make it work

[@timothyfoeks6446]

I used to own a 1997 gmc sierra 1500 with a 5.7l and I put true dual cherry bombs on that truck and I loved it !!!!!

[@EndlesSuffering]

What length size?

[@martinmoreno4536]

Impressed with how nice that actually turned! Cool vid

[@theshupebros2975]

Love doing my own exhaust work as well but for the amount of money spent on all the adapters and clamps you could have had some body weld it all cheaper, (here anyways) but you could also have got smaller mufflers that wouldnt have needed all the adapters. Cherry bomb and thrush make several different sizes. But it still works thats the main thing. And here you could have got these same ones for 35 at the store with no shipping fee. But good job though, you made it work, that's all that matters in the end. But I do agree with putting turn downs, when you have a loud/aggressive/thumping sounding exhaust, having it point at the ground to bounce off with really make it rumble. Thats how I have my 78 f150. One loud ass truck, and bouncing off the ground, it gets attention just from starting it without any revs. So adding turn downs would really add to it.

[@victorhunsaker7705]

Yea yea

[@spcracing3810]

I got the same Escalade, think about putting a set of flowmaster series 10 on it but those cherry bombs sound good.

[@darrekl4662]

You find a lot of people on KZbin that got no damn clue what their doing😂😂

[@OddTimeMan]

*they're

[@DaVid-yj6fh]

Does it matter. You also got a lot of people on KZbin that criticize diy..jobs. Its called learning

[@codystelzer5700]

Dude, rev the damn thing! Put the pedal... to the floor... I want to hear it!!! Lol

[@srtallday3655]

Did they stay up without being supported near the end of the glasspack

[@johnhalchishick7094]

Of course it worked I'm in my 60s we used to run these all the time where I was in my teens

[@AllAlaskan907]

You should put some 90 degree turn downs. It will point the exhaust down so you dont get it coming back up in the cab BUT it also points the sound down and will echo off the pavement and make it sound a little louder.

[@enginebuzz5741]

AllAlaskan907 I did that with my Silverado sounds really good

[@GMT400Chevy]

Engine Buzz What he said, glass packs aren't exhaust tips!

[@bobbyfenton738]

AllAlaskan907 ...I agree totally

[@84montecarlonazi]

AllAlaskan907 yes u are so right it's sound way better with turn downs also that blowing on the axle will fry the seal and oil will leak onto drum I did same thing on blazer so voice of experience

[@Taylor-dl2kr]

AllAlaskan907 Dumped exhausts sound dumb and drone the hell out of the cab.

[@anibalmartinez3949]

What size pipe and what size glass pack did you worked on. Thanks

[@BowtieForLife420]

If you're keeping it that buy yourself some turn down tips. Had an issue with exhaust going into the cab so i put turn down tips on and no more issues

[@enginebuzz5741]

Kyle Rozema good idea, only have problems if stopped at a light with windows down, gets alittle fumed

[@KidJaeProductions]

Beautiful startup

[@Sethh5]

Get a y-pipe n a new tail pipe n hook it up itll sound even better... you get your crisp sound from tail pipe. I built custom exhaust for 20yrs.

[@elnaolsen3911]

Sounds awesome! I looking for exactly the same sound for my 3rd gen trans am with a lt1, but I can't find anything that mean. It's different engines

[@elnaolsen3911]

I don't like the raspy wasp/mosquito sound. I want it really deep

[@mattbschall]

Why didn't you just buy the right size gladspack?

[@Scatpackkiller21]

SCHALL_DESIGNS11 1 😂😂😂😂😂😂😂

[@0311tard]

SCHALL_DESIGNS11 1 because they thought the exhaust was a different size. What’s the point in buying new glass packs when you can buy adapters?

[@mufasa3168]

Funny ass video all throughout! Thanks man!

[@310smoker]

was funny , says dos and puts on the 1st one.

[@jeremylee8448]

Did you run the dusl glasspacks into a single exhaust outlet?

[@calvinvoicess2647]

How many clamps does it take uh 6 Just wield the damn thing and finish out the exhaust pipes to the end

[@kb3yourmom912]

Chevy Escalade and a GMC Sileraydoooo!

[@imurbrother2128]

I know this is an old video, but I knew I was in for a treat when I learned that there's a Chevy Escalade. I was waiting for someone to say "here, we can use this wire coat hanger to hold them up". The donkey di@c hanging below the pickup topped it off for me 😂😂😂

[@deuswulf6193]

One man's Chevy Avalanche is another man's Escalade EXT and vice versa.

[@imurbrother2128]

@@deuswulf6193 true, I have a 97 Chevy Tahoe often referred to as my Yukon or Suburban. So I made it official, I now have Yukon rims on my Tahoe 😂

[@brenthorton5003]

Fabulous sound

[@MrMercaholic75]

How did you do the tail pipe. Im doing this rn.

[@islandwanderer1173]

Man, dont listen to the haters.. I happen to like your video dude.. Thanks for sharing, happy 4:20 man! Do what makes you happy!!!

[@kurco2905]

Island Wanderer you clearly ate paint as a kid, he has no idea what he's doing and everyone is telling him

[@islandwanderer1173]

@@kurco2905 im not saying hes doing it right, but he did it, which is more than most would do...

[@joekrim6557]

Don't listen to sovereign idiots

[@the_car_guy5915]

Stock mufflers: Ain't nobody got time for that.

[@cadirlampe4545]

Awesome sound.....

[@silvirhunter3607]

dang. gonna have to put that on my Dakota.

[@dicairebo]

Do you get fumes in the cab?

[@torrezmcgahee8642]

What kind of saw

[@ItsMeTyScott]

Man when you know how to run a sawzall they work a whole lot better than that just so you know😉

[@Jaymoe69]

U guys. Could've made slots arround the tubing which was larger, than tightend arround the smaller diameter....

[@gparson41]

Need to put turndowns on those mufflers.

[@Mcleod0000]

no ones going to know your flooring it , perfect

[@jrpineda4295]

Can u still smog the car?

[@ItsMeTyScott]

And on the next episode we're just going to put a clamp/ adapter exhaust on a Cadillac Tahoe

[@alexpopescu3696]

Sounded better stock

[@MrAdrian1018]

I want a Chevy Escalade

[@ricardosalinas5298]

Que medida es el mofle??

[@brittanychamberlin3785]

true duals are two separate pipes from engine to tail pipe...that was a fake dual setup before you cut them off.

[@enginebuzz5741]

Brittany Chamberlin your right, I thought it was "true duals" going into the muffler, but it's not true duals till they're completely separated. My bad 😐

[@brittanychamberlin3785]

all good

[@SaahajMattey]

are all chevy /gm exhausts like this, dual in the muffler and single out the muffler? I'm thinking of doing a muffler delete on my 02 Tahoe 5.3, can i cut it like you did, and weld 2 pipes on to the back of the car, or do can I actually just leave the exhaust chopped off as it is? 😂😂 without putting ppes all the way back? I'm only 17 and new to the car scene, plz dont judge, I just want to rid my muffler

[@davidburkhardt9684]

Many of the 5.7 trucks have duals into the muffler. They run from each side of motor through their own cats.. so yes true dual... unless you have a single cat. Then it y pipes to that cat. I've seen 90s chevys both ways stock.

[@MichelLinschoten]

You have no clue wtf you're talking about, these are TRUE DUAL, as they have 2 cats every 5.7 350sbc came that way

[@ChevykRyan]

where did you get the adapters from?? do you have the link I want to install dual glasspack for my 1997 k1500

[@enginebuzz5741]

98 Chevy k1500 Ryan do you have duals?, most likely so you gonna need 2" glasspacks and they will adapt to 2" exhaust pipes

[@enginebuzz5741]

98 Chevy k1500 Ryan do you have duals?, most likely so you gonna need 2" glasspacks and they will adapt to 2" exhaust pipes

[@enginebuzz5741]

I find a link for ya, enjoy! amzn.to/2tZhq6M

[@ChevykRyan]

Engine Buzz thx yes I have duals

[@JonathanMakrodimitiris]

i think i should do this to my 3.5 pilot

[@jidana3194]

Technically they are all gm but anyways I like the Chevy escalade is your vehicle so that means you can call it how ever you want so don't listen to those perfectionist people

[@joekrim6557]

Snowflake response. Technically it's not what you want call it.

[@jidana3194]

@@joekrim6557 did you paid for his vehicle or are you driving his vehicle ? NO that means the if i want to call my car joe krim or donald trump is my business not other people's business

[@tclipssantana9697]

Any exhaust leaks or check engine afterwards?

[@tuggyboat]

Hell no

[@imsaucey2938]

😂😂love your editing😂😂😂

[@thekingcasper5487]

Bro wtf put pipes at the end of them

[@budman1072]

Wait till the vteck kicks in yo

[@mcshidnfard456]

You don’t need any pipes after the muffler right ?

[@enginebuzz5741]

McShid NFard no, but it does depend where you want the sound directed to.

[@joekrim6557]

Buy the correct inlet size ..

[@zachlint7388]

This video was to painful too watch when he called it a damn chevy its a freakin cadillac

[@erikherrera3216]

Zach Lint same difference

[@zachlint7388]

Actually there are a few key differences

[@the_car_guy5915]

@@zachlint7388 Same drivetrain, same body style, different badges.

[@diyspeed]

Same engine, trans,hardware and frame. Different trim

[@brandonvansel3716]

@@zachlint7388 I own a 99.aluminum a arms and billstein shocks are the biggest difference.there some trim and interior diffrences but there 98 percent the same.I've owned a bunch of obs trucks to compare

[@Meatwad.Baggins]

3:10 the zooming 😅

[@danniewhite1204]

Perfect example of exactly what not to do to your ride !!

[@DaVid-yj6fh]

Why

[@brandonvansel3716]

In the south,We roll straight piped shooting flames so he's done a Damn good job lmao

[@fanmanone]

@@brandonvansel3716 YEAH!!!! 👍👍

[@foxhillhomestead3444]

If ypu have two cats on it why put two glass packs on.? Just run the cats as a muffler will make the same noise

[@neilperkins7165]

😂😂 that sawzall though 🤨

[@JulianFRosales]

Why not just straight pipe it?

[@ernestfineday1289]

The young man looks like Jimbob from the waltons.

[@luishernandez2999]

Cadillac escalade will be

[@ricardosalinas5298]

What is the measure of the cherry boom?

[@lavahyperion300]

They look like the 18inch which would be like 23 inches total length

[@kurco2905]

Why the fuck does he have a lift kit if he has this just wasting his ground clearance 9:16😂

[@maynardreed8374]

Needs tailpipes

[@lucasmoseley1467]

That thing sounds pretty mean stock

[@enginebuzz5741]

Lucas Moseley lol yeah gotta love Chevy!. It wasn't loud enough tho

[@forgiven_lightofficial3732]

Bud, its a Cadillac escalade not a chevy escalade

[@enginebuzz5741]

Cadillac, chevy, gmc, Yukon, all the same just different trim packages and different logos. All are made by Gm

[@raymondandrade2836]

Same shit buddy

[@ljduce]

Is the same in regards to engine, parts, chassis..etc, Gm's lazy way out... BUT an Escalde is NOT a Chevy... go to a dealership and find out if they're the same.

[@raymondandrade2836]

They make from same company

[@MrTroll-je5bz]

@@ljduce same shit

[@DB-rd6uy]

Cherry Bomb glasspack on a 2006 Camaro V6

[@redneckyt2860]

It'll sound like a mad bumblebee

[@Thinker669]

Go to a muffler shop. They weld on the exhaust. Clamp on exhaust is nothing but a hack job.

[@enginebuzz5741]

Mr. Nationwide the whole Idea of this channel is to avoid bringing it to the shop and to teach how to do it yourself, and cheaper to. Might not be as pretty but waaay cheaper and you get the the fun of working on your truck

[@mcshidnfard456]

Clamps aren’t a hack job you idiot

[@nelsonbarnett3014]

Way size is the pipe

[@erok1083]

16" im assuming

[@marcellagomez9066]

WOW!!! This was a painful video to watch, not sure how I even got here. I guess we were all young and dumb at some point in time in our lives lol.

[@codyhitchcock3443]

"mechanic"

[@bishop5166]

lol....Chevy escalade

[@bigtexas7580]

Old, tired 99 vortec LOL.

[@swagbucksman34]

Those are some weak revs

[@cashlivingston8672]

I dont believe i've ever heard of a Chevy escalade.

[@josephdickerson5802]

Cash Livingston Chevy Cadillac GMC Holden their all the same all owned by general motors corporation

[@the_car_guy5915]

They're all made in the same place.

[@anthonyroberto3732]

Put a dump down on it, make it look and sound better in cab

[@enginebuzz5741]

Very true, I’ve never realized how much of a difference that makes. The sound harmonizes off the road a delivers a deep, crisp sound in the cab.

[@anthonyroberto3732]

@@enginebuzz5741 Yes, I highly recommend it!!

[@austinwood9636]

Not a Chevy bud

[@johnbeer5242]

ain't Cadillac supposed to be luxury n no noise on the engine sound

[@enginebuzz5741]

John Deer it just really a Tahoe with Cadillac stickers and heated seats 😂

[@johnbeer5242]

Engine Buzz ohhh u like to pretend in the mirror huh 😂😂😉😭😞😉😂😂😂haha

[@narc6150]

John Deer That's true but it won't hurt to get a little Lower pitch sound. In which I might get the regular flowmaster for my escalade.

[@amd65ak47]

CHEVY ESCALADE.. lol 😂😂😂 lol.. some people.. his kids should have stopped eating a drywall around the age of 4. Sound the better stock at least the exhaust exited out from under the vehicle and would pass inspection

[@ldlfamilyfun.9538]

So they fall off and you waisted a good pair of cherry bombs. Like you couldn’t just have it welded and done right. Clowns.......

[@ClassyLyfeStylellc]

Ana Pasillas not everyone can afford the weld or have equipment. Hence why people watch his video, me I thought I’d get a laugh

[@gabrielabrego9646]

Clowns is close. Lol

[@brianshaggy]

why waste $40 when you can do it yourself in less time and for about $10 lol I've saved thousands by doing simple searches on the internet

[@hankdagmar2167]

It's "wasted", not "waisted". Dumb ass.

[@owa2533]

Only a matter of time till they fall off. Needs to be welded.

[@enginebuzz5741]

Held up for 4 years now

[@Know1_music]

No its not a chevy bud its a cadilac and its not a rubber thing i dont think u know much about cars or veichels

[@ralphchurch2263]

So many things he did that make me cringe.. you shoulda poured oil inside those things and light them on fire. Burns the fiberglass out. And then they'll sound like they should.

[@angelag2452]

Cherry bomb not as good as I thought so I ran straight pipes on my 2015 Chevy Silverado sounds way better

[@310smoker]

sounds like it will fall off .

[@paulpaulo9018]

Did he say Chevy Escalade hahahahahhah 🤣🤣😂😂

[@joelarchuleta1814]

some backyard mechanic crap

[@ljduce]

He failed Spanish class too...lol

[@playboy1978able]

Guy keep saying redneck connectors funny sound like a Yankee or Canadian to me

[@fckitdude]

Cadillac is Chevy people.... Do some research....

[@DJKEYS-br1xh]

Umbrella of GM Corp.

[@slowrado1784]

THOSE ARE NOT FUCKING TRUE DUALS

[@koolaids9339]

Dur Way du loud fur a Tahoe!

[@RichardSmith-ic1zw]

Cadillac Tahoe 😂😂😂😂

[@captaininsano2777]

Lol Chevy Escalade

[@robertluich5656]

That's not true, dull, exhaus........ Yours coming down from 2 headers into one pipe, then out the back ass 2. That is not true, duels off.

[@AdrianWeber-mr8qs]

dooky doo doo haha. stinky boy

[@CHUCKNORRIZSFOOT]

Clowns😂

[@jimmychanbers2424]

And most folks will pay $300 dollars for that.lmao

[@curtisjackson9145]

damn dude this is kindve a hack job😔🤷🏾🤦🏾‍♂️

[@johnbeer5242]

grinder is way easier instead of that saw

[@enginebuzz5741]

John Deer it does I just couldn't get all around it

[@KidJaeProductions]

Cadillac Escalade

[@hankdagmar2167]

This is worse than an episode of "Gilligan's Island".

[@redneckyt2860]

Chevy Escalade?🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 It's a Cadillac if you don't know what it is don't say it and if you don't know what it is look it up