CHEVROLET CRUZE ENGINE STARTER REPLACEMENT. CHEVY SONIC STARTER

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@livinglifelikewhat]

thank you for making this video. much appreciated. you made it especially easier by taking the manifold off. it gave me such a better understanding of where everything was. thank you!

[@johnnylemoin19]

THANK YOU .

[@sergiovalenciahimi5115]

Hi guys ! Can you make a video of how replace Crankshaft Position Sensor on Chevy Cruze 2011-2012? I can’t locate where’s that sensor

[@rebeccagee8988]

It’s behind the starter doing mine as we speak

[@mallieallen9141]

Yes please make this video

[@randidiaz7061]

Whats the sign its it crankshaft sensor my car just clicks wont start

[@danwebb3938]

How do you get to top bolt of starter without removing intake manifold.

[@Santos-qn2ob]

Sorry for the late response but I used a 13mm stubby and another stubby to help turn it..use the closed side (the one that makes a circle) I did it from the top and didn't even have to get under the car..hope this helps someone..I'll probably make a video soon..i get my starter this Wednesday

[@leeharden4060]

Ofset wrench

[@ManojKumar-ut4ww]

Iam indian i have support ur video's

[@genarogutierrez8036]

Desarma la mitad del motor de arranque y no desarmas la admicion y listo!!! Sin tanto problema

[@Rusbel101503]

Como saves no funciona? Solo estarea?

[@charltonarmstrong9022]

So would it be easier to replace from the bottom if I don't have to record? Would the starter fit from underneath?

[@santoscamacho3361]

Does the starter work if it's grounded somewhere else other than the starter?

[@soundsolutions]

Did you break the connector when undoing the bottom starter mount bolt? I did, have to repair with a new ground tab connector. Yes it has to go back the same for ground circuit.

[@santoscamacho3361]

@@soundsolutions the reason why I asked because I got my car out of a shoo that was ripping me off and telling me I needed a new starter ..when all he did was take my power and ground wire and bolt them together and hid them under the wires above the transmission

[@gracephahlane8409]

HI GUYS, IVE JUST REPLACED THE FILTER TRANSMISSION (CHEVY SONIC 2012) AND UPON COMPLETION OF THE TASK THE CAR ONLY CRANK AND DOESNT START. LATER AFTERWARDS DOESNT CRANK EVEN. STARTER DOESNT RESPOND. WHAT COULD BE THE PROBLEM?

[@MegaHellaDope]

What was the problem?

[@MirasMitten]

For those of you attempting to make this repair on a chevy sonic, you might run into the problem I had that the manifold bolts were rusted and I was worried about those breaking. with the manifold in the way it is impossible to reach the starter from above on the sonic. I was able to remove the top bolt of the starter using a socket and ratchet and about 5 extensions with a universal joint placed halfway between the extensions, so it could reach up over the starter in an. L shape. I could not see what I was doing, but had a spotter looking down in from above to guide me to the bolt, which was barely visible. To reattach the starter I used a small amount of hot glue to hold the top bolt in place before putting it back in place and securing it on the bottom before ratcheting down the top bolt. Difficult, but possible. Good luck.

[@deadassbeats1925]

or u could just get under the car lol

[@TheProducerQ]

Can you do video on crankshaft sensor

[@soundsolutions]

It's behind the starter motor. Enjoy the job.😢

[@PSPLORDSHIP]

How would you have gotten the top bolt off the starter without taking the intake off ?

[@asis5255]

I did it without removing it just need a extension and a long socket.

[@PSPLORDSHIP]

@@asis5255 do you know the name of the exact extension u used ?

[@jimmyboyer9392]

@@PSPLORDSHIP there is another video of the sizes. how to change starter on 2012 chevy cruze 1.8

[@PSPLORDSHIP]

@@jimmyboyer9392 can u link it here

[@Ken-harris]

How did you know you needed a starter

[@bradyjay917]

Any info for me now after 2 years?🤣

[@Oliver-sg9ol]

@@bradyjay917 haha yeah me too

[@bradyjay917]

@@Oliver-sg9ol turns out it was my starter, I was tapping on it and starting turning over started at one point but obviously changed it anyways

[@randidiaz7061]

How do u knw if its ur starter

[@Jedi_Luke]

Take care of that oil leak

[@kdk200]

2015 Cruze and you replaced everything on it so far

[@kevinstypukowski1573]

Frome where is your accent ? Sounds like Polish

[@vm8514]

😅😅😅

[@alexfrazier2899]

I don't mean to be negative, but are you a professional? I looked up this video because I needed to see the set up after a customer messed with their starter. What mechanic doesn't know that only two wires come off the starter? And I wouldn't worry about the PCM (ECU) on this car. It has a 250A Maxi fuse between the battery supply and the starter. Kudos to you for trying to help people. Sincerely. But make sure you have your ducks in a row before making a video.

[@antstacks5039]

Can you please next video you have just get to the point?

[@Damon-v6h]

I have the 1.4 turbo and i can tell you its a piece of doo doo

[@andrejacinto8476]

Fala brasileiro caramba pura que parou quem postou essap0rr

[@qx4n9e1xp]

I just hit my starter with a hammer & socket extension and it started 🤣 Shut it off and then it wouldn't start again. And then it did. F Chevy products, lmfao.

[@mohtadj2410]

The worst complicated car ever

[@pjo1093]

Talk slower . Wow!!!

[@hunnarella]

Can you please stop talking so much and do the job 🙄 u talk more than your doing the job

[@goodvibes-mr7ty]

Good video but you skipped past the other helpful parts

[@stevendavis3991]

and then go axactly backwards and you can place the new one on.. That simple. ;)