CHEVROLET CRUZE INTAKE MANIFOLD REMOVAL REPLACEMENT CHEVY SONIC 1.8

CHEVROLET CRUZE INTAKE MANIFOLD REMOVAL REPLACEMENT CHEVY SONIC 1.8
In this video we will show you how to remove or replace the intake manifold on Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. This video may cover Chevrolet Sonic intake manifold replacement since they share the same engine. We demonstrated how to remove and replace the intake manifold on Chevrolet Cruze with the 1.8 engine.
We showed you how to remove and replace the intake manifold on a 2015 Chevrolet Cruze but this video should be helpful on:
2008 Chevrolet Cruze Intake Manifold Replacement Removal
2009 Chevrolet Cruze Intake Manifold Replacement Removal
2010 Chevrolet Cruze Intake Manifold Replacement Removal
2011 Chevrolet Cruze Intake Manifold Replacement Removal
2012 Chevrolet Cruze Intake Manifold Replacement Removal
2013 Chevrolet Cruze Intake Manifold Replacement Removal
2014 Chevrolet Cruze Intake Manifold Replacement Removal
2015 Chevrolet Cruze Intake Manifold Replacement Removal
2016 Chevrolet Cruze Intake Manifold Replacement Removal
2012 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2013 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2014 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2015 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2016 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2017 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2018 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
2019 Chevrolet Sonic (Holden Barina) Intake Manifold Replacement Removal
► Intake Manifold: amzn.to/2VivdUz
►Fuel Line Disconnect Tool: amzn.to/2Wjs5Eq
► Tool Set: amzn.to/2TCHRca
► Panel Removal Tools: amzn.to/2tfiEZD
► Screwdriver Set: amzn.to/2tbcI3W
► Electric Screwdriver: amzn.to/2VeMFJP
► Coolant: amzn.to/2V0rTbN
► Reverse Torx Socket Set: amzn.to/2LlQpEH
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@quinnco9]

I’m blown away while working on my Sonic 1.8 by how stupidly hard it is to work on. I’m never getting another car with an engine bay that small.

[@christyjeter1560]

I hear ya I kinda getting to hate mine also

[@gingerwallets8000]

i love how you guys dont edit out the struggle of getting stuff out so then your audience knows more of what to expect

[@bryanchambers8868]

Wow ! That has got to be the most difficult starter to replace that I have ever seen. Good Job

[@thekenpokid21]

Thank you my friend. You're a life saver! Had to change the starter on my dad's car and your video walked us through taking the manifold off because we couldn't get to the bolt. Keep up the good work!

[@nikkobejarano]

Best vídeo ever seen of how to remove the intake of a Chevrolet. Thanks man

[@billfromjersey]

I'm doing the head gasket on my 2014 1.8 Sonic. This was very helpful.

[@LemmeTryFixIt]

Thank you so much for posting this. I am doing this job for someone right now. I was hoping that the cylinder head would come out with the intake attached. Maybe it can? Looks like I could remove the 2 boats from underneath, and it might would come out with the cylinder head.

[@williamperez156]

I'm going to do that soon thanks.

[@johnnithanfreeman4423]

Thank you yall have saved me alot of money

[@rolandomendoza4216]

Thank you!!

[@gilbertmendez1991]

If removing the alternator. What connections on the intake manifold can I remove ? Without removing it all

[@llcoolpj]

Does the 1.8L intake manifold have the little orange thing that cause engine problems? I have a 2013 cruze 1.8L. I have to change my pcv in the valve cover. I just want to make sure if i do or do not have to change my intake as well. I undersatnd they are both connected issues in the 1.4L... but not enough information on if it is the same for the 1.8L. Please help me.

[@farhanobad9090]

Good friend

[@nj204]

This vehicle won’t burn oil when the intake gasket is bad will it?

[@sirroc216]

Does this apply TO changing a sonic LS

[@jimmyhassell1438]

Can you update the video to show that this method of removal will NOT work on 1.8 Chevy sonic. Only way to remove the intake manifold on that model is to remove the drive shaft and drop from bottom. Learned this the hard way..

[@jimmyclaar8111]

I don't understand isn't it the same set up to be exact

[@jimmyhassell1438]

@@jimmyclaar8111 same mechanics like engine but the body is different. The sonic doesn't give enough clearance through the top of the engine so the way your supposed to do it is you have to drop the drive shaft and remove from the bottom. You can technically with the help of a friend, remove from the top by loosening the engine mount bolts, pull the engine toward you while someone pulls the manifold out from behind but like I said that's not the way your supposed to lol.

[@christyjeter1560]

I thought this car was a 2012 chevy sonic

[@jimmyhassell1438]

@@christyjeter1560 no, actually the car shown in the video is a Chevrolet Cruze like stated in the title. The Cruze and Sonic are nearly identical with a few cosmetic changes to the body. Such as in this example, the Cruze has more clearance in the engine bay allowing the manifold enough room to be removed from the top. The sonic has less space to work with so the manual tells you to remove it from underneath the car which is obviously more difficult.

[@Dedicated_8]

I'm wondering, why does every single cable and wire have its own unique connector mechanism, it drives me nuts

[@christyjeter1560]

Me to

[@expertnugget]

So you don't plug in something to the wrong spot that much is actually good

[@timothyprathipati5275]

Hi, in Canada this is covered under warranty; check it out

[@goatedgaming9893]

Why don’t you remove the fuel rail? I’m about to replace the intake manifold on my car so I’m making a list of procedures, tools, materials, and parts I’ll need. I’ve seen others replace the o-rings from the fuel injectors after they pull the rail. Best procedure to do is always replace o-rings after breaking that seal. I do HVAC/R work, little plumbing, electrical, mechanical and refrigeration. If anyone has done this can you reply with issues and road unos you may have occurred during this replacement. Also good things to do while having the intake out, such as replacing hoses or sensors while I’m opening up.

[@bjthedj410]

Any videos on head removal I may have bent a valve and want to remove the head

[@mronemanband1]

over a 100k get a used motor

[@zacharynolte6085]

This looks expensive, glad mine was covered under warranty recently !

[@jrgunman904]

Zachary Nolte it’s costing me $1200 at the dealership at the moment FML😭😭😭😭😭

[@_Brohan]

@@jrgunman904 intake manifold is a ~$120 part.

[@zoomjoo]

@@_Brohan labor

[@_Brohan]

@@zoomjoo i know, it's ridiculous. I just replaced mine and it was not nearly 1080 bucks worth of labor.

[@derricknash8993]

Your a fuckin professional love u dude

[@dancurrier6421]

Where's the video for 1.4 engine with turbo

[@doctorauto4923]

For 2012 chevy sonic 1.8 it's a little more harder yes engine mount needs remove ok also top winshield cover ok .

[@RODRICO1]

I need a video on how to remove the whole cylinder head

[@mronemanband1]

get a used motor !

[@eloyguerra6323]

Can you show how to remove the intake manifold but on a chevy Sonic that shit is hard to take off 😂😂it is literally way to tight I can't seem to find any videos on chevy sonics 🤷🤷

[@ThatHookahITguy]

They have the same engine.

[@jdog9025]

THERE'S ABSOLUTELY NO REASON TO DRAIN THE ENGINE COOLANT. NOT SURE WHAT THIS GUY WAS THINKING.............

[@StacyMcCabe]

Explain why

[@drew8190]

I just did this replacement, and this video was extremely helpful, but i did not drain the coolant. Took off the coolant overflow hose from the reservoir side and rotated it out of the way then disconnected the pcv line from the valve cover, loosened all the bolts on the throttle body and with the air intake tube disconnected from the air filter box the throttle buddy rotated out of the way.

[@expertnugget]

Is that English my guy is speaking? That accent is hard

[@jonesy4588]

my god , take the motor mount loose and pull the motor over

[@DannyP979]

This is not accurate. The 1.8 require the drive shaft to be removed to remove the manifold from the bottom of the vehicle.

[@jrgunman904]

$1200 at your local Chevrolet dealership 😭😭😭

[@AndresMelenaJr]

40 bucks at a junkyard with warranty

[@mronemanband1]

@@AndresMelenaJr and it will be junk with a broken intake tunning valve

[@amishrobots]

9:30 "always use gloves guys when yr touching coolant, its very poisonous, I'm not wearing gloves, but always use gloves" .... "okay, don't do this other thing like I'm doing either" Basically just let me show you how not to do any of this.

[@kamikozy5125]

To other mechanics watching. This was a total waist of time and steps

[@PanchoPistolas45]

what tips you got? im doing this soon as well