Chevrolet Spark - Spark Plug Removal

DIY Chevrolet spark plug removal.
You can do it in just less than 30 minutes.
Seed is 2x.

[@potmej1]

I just bought this car (used) and I'm planning to change the spark plugs tomorrow. Looking at this video, I'd better book an afternoon off for this job... It took only 5 minutes on my Ford Focus :)

[@alexanderalexandrov6678]

Same feelings. It took only 5 minutes on my former Nissan Almera (Pulsar, Sunny) N15. And for now I drive _this_ monster🤕

[@mareerogers7663]

This is a good start at doing these in car not all has to be removed if only plugs only leads as not all fuel powered car is using fuel show plugs are old , can be six or seven hours , ours has three bracket to undo but two one on side and front will give room to take off and refit but the hose it should be removed for filter housing to the map and the connection to a silver pipe regards helpful tools long ones but really sure for dust etc an engine fail clears on how many flashes the second time it will be okay to look at plugs it not easy but the engine clean should be done during this unless it doesn't operate normal , most hose are clips to plastic mounts if a little jiggle isn't freeing it up in removal don't loose the parts it needs hex keys to do it in one minute ,, thanks for the tip , which plug lasts long term

[@eddyLF]

dear please can you tell me the sequence to tighten the valve cover for this chevy spark thanks

[@creedlyncreedrobillard8575]

Hello, I have a 2009 chevrolet spark. Can you please advise what kind of spark to buy on it. it would be grate if you can help me with the specs of spark plug

[@motourkovlogs8420]

big help for my chevrolet spark more power and god bless

[@eddyLF]

i need help for valve cover gasket replacement ( bolt torque spec and their order ) any tips please ( chevy spark 2015 )

[@jeroenkorfkorf2097]

Thanks for your tutorial. Just changed the plugs on my spark🤘😉🤘

[@edwardthor7763]

What year and what model? I am looking to purchase and need some legit mechanical, electrical, electronic reviews and nothing is returned for this model.

[@shamsherbakhsh2780]

Hi bro pls suggest my beat petrol ingien chk lite sensor proplm

[@christianahammond6964]

I hv same car the engine shakes and go off can you help me fix it

[@marcozrx1100]

thanks for this,, was just about to buy one , phew !! lucky escape

[@Forallpro]

Which is model fabric spark, and which model you put?

[@kees1]

Greet Help Video Tnx....

[@robynbiancaprinsloo9954]

How do you reconnect small aluminum clamp/pin that you had removed @ 3:40 to 3:44?

[@dewslat]

when you align back the hose you can just slide it back.

[@rommelvillanueva8472]

Just align it and pull/push it upward/downward

[@totbob8947]

Thank you . Can you tell me where is located the filter of fuel and how change it

[@lodunost]

In the gas tank I think. You have to drop the whole tank to get inside to change the combo pump and filter I believe.

[@fedorweemsch]

Which one is cylinder 1? Closest to the pulley?

[@Estebanvibes]

The first left

[@nicosnel1456]

Thnx!

[@lifanzuzo4464]

And also the device that cylindrical what is the main purpose of it ,is it a danger of it blanked?

[@lifanzuzo4464]

The oner underneath your throttle body?

[@jamsheerm3769]

Hi bro my spark running jurking complaind what we do sir pls help me

[@kekhrieusote3472]

Pwpwowwwppwpowpwpwwwpwwwwwqwqqwwqqwwqwqwwwqwwqwwqwqqqqwwqwwwwww

[@LR-yu3mx]

You cannot see. Why is camera not close to hands

[@Sroor2023]

How do you remove fuel rail to remove intake manifold ??

[@srikarvundavalli5934]

Did you find any video for that?

[@Sroor2023]

@@srikarvundavalli5934 no I didn’t find any video was planning to do that for my friend car but it doesn’t worth it , just dropped a bottle of Liquimollelly complete fuel system cleaner and that’s it .

[@srikarvundavalli5934]

@@Sroor2023 I’m asking because the coolant hose behind the engine that goes to the water pump is leaking on my car. It is really tight back there and I think I need to remove the intake manifold and fuel rail to get to the hose unfortunately

[@Sroor2023]

@@srikarvundavalli5934 ok if it was important in my case I’ll try to do it but it’s not that important cause he will get rid of the car after one month cause he got many issues now with this I don’t know what to say it’s a bulk of problems

[@maggziep4668]

😢 bloody hell! I have this car, exact same engine and my OBD2 reader is coming with cylinder 3 misfire being the cause of my check engine light... Really, Chevrolet?! That’s one hell of a job just to check the condition of the cables and plugs! Used to help my dad with any work on his cars and it was easy, not like this. I think I could qualify as a mechanic if I can do this 😂 😂 😂

[@dikkejannes]

In the end it's a Daewoo, not a Chevrolet

[@ABetterMeee]

​@@dikkejannes a complicated one based on the video

[@ABetterMeee]

​@@dikkejannesi wish it remained a Daewoo. I used to drive one and it was way better than this piece of junk.

[@npc9731]

Im off to the Mech...this process a joke just to change the plugs 😲

[@user-pd7ou2bn3d]

Os injetoris não mandão combustivel

[@landontucker5436]

Only remove the bolts you have to folks.

[@mohamercibeaucouppierrepou4406]

J'ai une chevrolet spark 1.2. 16 v en 2 ème. Vitesse le moteur se rate

[@morchedbabouri2729]

Vervei les bouji les câble et le filtre air

[@stzbg90]

Which is the engine - 1,2 or 1.0?

[@maggziep4668]

From looks, exact same as my 1.2 spark engine

[@stzbg90]

@@maggziep4668 For me, it looks like my 1.0 engine :D

[@mpoimmola3450]

@@maggziep4668 Hi what was the problem with cylinder 3 because my chevrolet spark the engine light is on the OBD reader it also says cylinder misfiring

[@lawrenceleible3670]

You should really specify the year of the car, Chevy Sparks don't all have intake covering the plugs, also newer ones are coil on plug design. Whatever is holding your phone wobbling around was making me nauseous. Weirdest part for me though, why no ratchet?!

[@motourkovlogs8420]

ok

[@petev.9357]

What year is this chevy spark?

[@dewslat]

2016

[@petev.9357]

@@dewslat Is it from a country that isn't USA?

[@dewslat]

@@petev.9357 yep.. not US.. Philippines to be exact

[@knightridersofgreece]

@@dewslat that engine is equiped only in 2010-2013 models!it can not be 2016!!

[@edbeacham2822]

@@knightridersofgreece no shit. Fucker should gave put it in the title that its a philippines spark!!!

[@lars90a]

It dosent look easy

[@Sam-zr9on]

Yes general motors are a little difficult the the other cars.

[@rac6510]

Holy shit you have to take half engine apart just to change the spark plugs!? What a fuckin shitty design.

[@andrewwilliams9177]

This is a joke all that removal to replace spark plugs even for us amateur home mechanics thats alot of messing around. Chevrolet are taking the piss😡

[@Estebanvibes]

If you live near London let’s do it together - I’m seeking to change mines for the first time tho

[@andrewwilliams9177]

@@Estebanvibes im up north mate but let me know how you get on 👍

[@Estebanvibes]

@@andrewwilliams9177 Awsome! I'm in Fulham, WelI just got my Chev Spark... I have the spark plugs so I either need the tools to open the engine or go to a garage for them to install them... If you are into mechanics and are into your Chev we can probably meet up - I plan a few upgrades on my Chev

[@andrewwilliams9177]

@@Estebanvibes North of England Merseyside so think its a bit far as i only do maintenance and repair on my time off work the car is my daughter's just done the aircon compressor today which was easy enough if you ever get to do it

[@mareerogers7663]

I watched it looks like U need when doing a free pair eyes lol the spark and plug removal is a first step for the change you don't actually take off the silver bit oops and there's a silver tube the recycler , so I'm puzzled but will try thanks good video your way

[@enochpowelghost]

Typical asian car you have to dismantle half the engine to get to spark plugs, i would say buy the best spark plugs that last the longest!.

[@desiderious1]

Poorly filmed and explained video. Your body blocks the view of what your doing and you never explain what your doing, why, what tools you need and what bolts and their sizes to remove.