chevy impala DRL

[@yaboijg96]

Hi just curious, where do you run the wire inside the car from under the hood for the switch? That's what I'm curious about.

[@TheBossXVI]

The firewall always Have wires running under the hood to the inside and I always looked for the closest grammar to run through

[@D23SHAW7]

Chicago in house >thanks man nice work >really help me out, on how do my fog lights light DRL

[@TheBossXVI]

Lol 😆 and im glad I can help 👍

[@erichooperarts]

Did you have to change the terminal that attached the power to the battery?

[@TheBossXVI]

No I did not

[@YOUNGMON3Y847]

How you install the black bowtie in the back on trunk?

[@TheBossXVI]

It's actually the OEM one's I spray painted them black. I just mashed everything around it

[@tommydearth2578]

Where you get the plug that goes to the fuse box ??? What is it called.

[@TheBossXVI]

Are you talking about the add a fuse

[@TheBossXVI]

www.amazon.com/dp/B08BWRNLS6/ref=cm_sw_r_cp_apa_glt_fabc_4SVSN7K7XPPYA7Y7E0GB?_encoding=UTF8&psc=1

[@tommydearth2578]

Cool I found it bro, I got a kit and about to do this lol so the wire to the battery does it just wrap around the terminal ? And the area where you brought the switch wire through it's kinda hard for room, how you get that down through the engine area to the rubber part that is behind the little department you put a hole in ?

[@TheBossXVI]

I got a wire eyelet to the battry and to run the wire thru the firewall I used a pice of clothes hanger to help me

[@tommydearth2578]

Thanks I got it all done, your video was a big help, cheers bro !!!

[@jakeedwards9726]

How do I tap into the fuse? And where did you run it into the car

[@TheBossXVI]

It's a thing that is call a add a fuse and I ran It threw a rubber grommet that's is on the firewall

[@isaelvasquez1640]

Wassup bossman i just wanted to know 2 When you drive at night are the Drl bright at night? I have a ltz impala 2015 they come with the factory drl foglight but i notice when i drive at night they turn dim idk why and i might just do what your are doing

[@jryanez8523]

Where exactly did you add the fuse & cable to what part of the harness?… i am guessing the red wire?

[@yooboivic5741]

Do take the bumper off to install replacement fogs

[@michaelhutter2160]

I bought kit and dealer installed them as there is store that has kit with wiring harness

[@TheBossXVI]

Oh ok good to know

[@michaelhutter2160]

@@TheBossXVI gen5dyi is site

[@shaundon8661]

@@michaelhutter2160 if you don’t mind me asking, what dealer installed yours?

[@onetruecommando5588]

Where can I buy the fuse you are using? I have the lights working already but the light button stays on at all times and I hate it. I feel like my battery could drain.

[@TheBossXVI]

I added the link to the description

[@onetruecommando5588]

Thanks!

[@TheBossXVI]

@@onetruecommando5588 no problem glad i can help

[@onetruecommando5588]

Oh and you should go with LED.. I had HID's to but didn't like all the wiring everywhere. The LED's I have are plug and play and much brighter for some reason.

[@TheBossXVI]

@@onetruecommando5588 make a little video of them and post the link

[@GggGgg-rn9ty]

Hey thanks for info on lights,i was wondering bout the wiring? I have an lt2 15 didn't come with the lights but i got bumper replaced and have lights on there but i have to power them up dont know where to get wiring from?

[@stomachhurts2044]

Idk but u should prolly just order these drl lights

[@evansmith6600]

Quick question did you have to manipulate the area to get the DRL in . Like any trimming or cutting 🤔

[@TheBossXVI]

No just took the old cover of and went right in.

[@evansmith6600]

Thanks for the response, ill try to put them in again. Seem to not line up all the way .

[@TheBossXVI]

I will say take your time because ones you get frustrated nothing go's as planned

[@ampgreer795]

How much would you charge to install this kit

[@TheRizzie11]

Where did you get the power switch from ?

[@TheBossXVI]

Were did I get the power for the switch or the switch itself?

[@TheRizzie11]

theboss 1622 the green switch that you had in the car for when sometimes it didn’t turn off ?

[@TheBossXVI]

@@TheRizzie11 it came with the DRL lights when I ordered them on Amazon

[@low-kei4655]

Where can I buy them from

[@davidpaul9271]

Hello. I installed the same product as your DRL. And I also worked on programming for dimming. The problem is that the brightness of the product is so strong that my eyes hurt. The DRL of your car and the DRL of my car are the same product, but the brightness is too different. Can I ask you for some advice on solving this problem? If you tell me your email address, I'd like to send you a DRL picture.

[@TheBossXVI]

Hello I always have mind bright never want it to make them dimmer.

[@davidpaul9271]

@@TheBossXVI . . . . . .

[@cupsofconversationsbackup7420]

Thanks For the tips

[@JFKilluminati662]

I installed this myself and blew a fuse or something now my windshield wipers, trunk and horn, high-beams don’t work :(

[@isaelvasquez1640]

Did you ended up fixing the problem Did you did the sa,e steps he did?

[@JFKilluminati662]

@@isaelvasquez1640 not yet (

[@JFKilluminati662]

@@isaelvasquez1640 can’t figure out what I did

[@shawnkesel529]

Do you only need the add a fuse if you want the switch power to shut off with the key? Thanks

[@TheBossXVI]

Yes