Chevy S10/GMC Sonoma Differential Bearing and axle shaft replacement

thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my KZbin channel on your social media. Links will be on the bottom.
#chevys10 #axle #jabothemechanic
venmo.com/code...
www.paypal.me/...

[@johns3812]

i have a 2003 GNC Sonoma SLS and this is exactly how mine is and worked perfect. Thanks!!

[@Austin18025]

When you are pulling out the axle, use it to pop out the seal. Works perfect.

[@MrRichardbryan]

Showing tools and their use was helpful. Hello Penny !

[@rhodge312]

great job, very easy to follow!

[@charlesbachand6884]

They do sell repair bearings that shift the position of the path on the shaft so you don't have to replace the shaft saving big money, the bearing rides on a surface that is not worn and also comes with the seal built-in, which works great. I work for Advance Auto Parts the cost is 45 dollars a bearing.

[@stevelee4653]

great video. very informative.. thanks.

[@SW-hw1mm]

Big help ! Thank you!

[@hedgepethracing9590]

How many times you use that puller? Looks brand new

[@michaelsenters4894]

Good job think you a God bless you

[@j053vas7]

Very good. Excelente 👍👍👍

[@gualaigry1124]

So do they make a noise aswell when they go bad? When I drive especially on the highway and let go of the gas then when I press back on the gas and it starts to engage it makes a very loud noise

[@huachis]

Super great video!!!

[@johnrios5099]

I have a 1989 S10 Blazer 2wd Would this be the same procedure?

[@willygarcia4764]

Thanks brother I have the same issue but whats weird I replaced both rear sides brand new bearings and seals about 2 months now one has play like yours in the video

[@willygarcia4764]

My axle might be worn out

[@purewhite84]

How about you start from the beginning? Just a thought

[@FirebirdRestores]

A sonoma with a utility bed? Where can I get one??

[@tremayne3]

What kind of jack is that? Where did you get it? Excellent video Sir.

[@natalecriscimagna447]

I have 98 blazer would procedures be the same

[@furries4evaandeva]

Did he go over the seal number??

[@renemosqueda7891]

👍👍👍👍👍🚘🚘🚘🚘🚘🚘🚘 el mejor

[@ELMICHMX]

you have a video of how to replace the differential bearing, on that same side? thank you very much for your answer

[@JaboTheMechanic]

I have one for a tahoe should be similar but make sure you do your research

[@four4four636]

I can't get that rod /pin out the casing

[@four4four636]

Piston*

[@richarddonner2760]

Did you get the pin out? I cannot get mine out. how much torque can a 5/16 nut have?

[@four4four636]

@@richarddonner2760yeah they definitely don't come out as easy as this video makes it's easy just to buy a whole new rear end and put it in

[@four4four636]

@@richarddonner2760 it's easier it seems to buy a brand new differential than to try and rebuild the gears in it

[@four4four636]

@@richarddonner2760 I couldn't get mine out I only way I could think of it to come out would be if you had some type of pneumatic punch

[@jonathancarrillo1407]

What’s the year on this ?

[@JaboTheMechanic]

2003

[@BrandonSiff-lb7ur]

So I should be able to do the exact same thing on my GMC 93 Sonoma

[@matyrobloxtoonsandanimatio6107]

Hi how a Penny and Sophia

[@JoseMorales-ho7lo]

Stop talking, get to work