Chisels For Woodworking (YOU NEED TO KNOW)

[@DLPetterson]

Ben, keep up the great work! Enjoy your videos and the little touch of your sense of humor.👋👍😎

[@HewAndAwe]

Heeeeey buddy! How are you doing???? Of the few peeps I miss from IG you're one of them!!!

[@buildingsalvage]

This might be my new favorite channel, what a fucking legend

[@HewAndAwe]

Cheers dude! I hope you had a lovely Christmas! 🍻😊🍻

[@FixitFingers]

Very educational mate. As a fella just starting to give a fire truck about chisels this will be handy when I finally get a 'real' set to replace the $18 carpenters set I currently use ;)

[@alexpeach6615]

top vid again ben, gonna try that 20 degree trick myself! keep it coming, best wood channel on tinternet

[@HewAndAwe]

At-mate! Now that’s a compliment!!! 😊 thank you Alex!

[@riversidewoodworks]

Awesome video. I’ll have to look into the shaptons. I have two sharpening stones but no set up for them yet. Need to build a holder like that

[@HewAndAwe]

Thank you buddy! I find a little station like that helps keep the bench dry and clean.

[@derekhansen7508]

As always some real nuggets of information delivered with humour. Love it.

[@HewAndAwe]

Cheers Derek! 😊

[@thewoodologist8176]

Just as I post on your other video how much I love my pmv11 chisels I get shown a video of you saying you wouldn't get them 😂 but I'll say it again, treat your self to an atoma 400 diamond plate, it works wonders flattening the shaptons and getting the backs of chisels flat in no time ! Cheers

[@HewAndAwe]

Only cause I hate sharpening... chisels I use more than any hand tool and putting a new grind on PMV11 makes me shiver!

[@tonyworkswood]

Another superb informative video Ben. Great tips, pros and cons. Tony

[@HewAndAwe]

Cheers Tony! Hope you’re well mate! 🍻🍻🍻

[@alankirbywoodworking]

Love my Shapton stones, best I've used and I've tried a lot over the years. Great video 👍

[@HewAndAwe]

Thank you Alan! 😊

[@richardmorris7508]

Really useful tips… have to look up those stones as been trying to get an edge on my faithful chisels and struggling… got a double sided diamond plate but not convinced it’s working as it should… like the idea of using the sandpaper stuck to the in feed table… nice touch…. Will be watching this a few times me thinks. Cheers for the content.

[@HewAndAwe]

Thank you Richard, you can use anything even the marble kitchen work top as long as its VERY flat!

[@flol4570]

Great Video, no BS and no time wasted in the explanations. And by chance i do share the opinions and those 3 shaptons :). Good choice.

[@HewAndAwe]

…and they’re cheaper than the diamond stones, I forgot to mention that 😬

[@davidblake1663]

There's that Space Odyssey sharpening stone again! Congratulations on 10,000 subscribers! The momentum is with you.

[@HewAndAwe]

Thank you David! Hope you’re well! 🍻🍻🍻

[@stavros_katsopr]

03:55, that's enough for any student to know! 🤪🤣🤣 Another great vid mate, oh and a great sharpening station indeed.

[@HewAndAwe]

Cheers buddy! 😊

[@liamcallahan5726]

Great sharpening vid, I have used sandpaper up to 24,000 and gotten great results. I am going to 20 degrees on some of my chisels after seeing how yours work. Have a great week.

[@HewAndAwe]

Really?!? I didn’t know you could get sand paper to that grit! I would of thought anything over 4K would be pointless, that’s as high as I go on my car paint.

[@StrawbyteWorkshop]

Great video. I have a similar view to you with regards chisel sharpening the primary bevel - I'm not fan of sharpening purists. It's got to be quick and easy. Plus I'm not afraid if sharpening jigs either.

[@HewAndAwe]

It gets my back up, I see them in Facebook groups commenting like their some sort of water walker, I can paint photographic looking oil paintings but I dont tell peeps who paint like its a cartoon thinking is photographic looking that they can't paint, they can paint, but in their way... Why peeps feel the need to one up themselves annoys me so much! Small dick syndrome I call it "-D

[@michaelflynn6178]

Some great advise Thanks

[@HewAndAwe]

Thank you Michael 😊

[@graham8854]

Great video, really informative. Thanks for continuing to share your knowledge 🤟😎

[@HewAndAwe]

Cheers Graham! Hope you're hav'n a wicked weekend!!!

[@Sly_Wolf_1]

Congrats on the 10k mate🍻🍻 Another great video mate once again I have tool envy. I only have one chisel but just change the blade when I need to from OIS to Starlock, gives better control🙄

[@HewAndAwe]

Thanks mate! Your meaning a angle grinder I take it?

[@Sly_Wolf_1]

@@HewAndAwe 😂 😂 a multi tool 😂😂😂

[@HewAndAwe]

@@Sly_Wolf_1 oh yeah, I don’t have one of them 🤦🏻‍♂️

[@turgworks4138]

Learned a lot from that, nice one Ben

[@HewAndAwe]

Cheers buddy! 🍻🍻🍻

[@planespeaking]

MHG make nice socket chisels in metric available from Dieter Schmid Fine Tools or TF tools. They're a bit chonky, like shipwright chisels but lovely looking, and well made. Agree wrt diamond stones (plates). I was very disappointed with them.

[@HewAndAwe]

I agree, socket chisels for the win! `i'm not gonna look at new tools unless they are free 😂

[@VORONM]

Good collection. Only the chisels from Russia are missing :-))

[@HewAndAwe]

Only Putin to blame for that mate, Russia deserves better...!

[@jamesbuilds]

They were there, but they turned to rust, then vanished in the night.

[@HewAndAwe]

@@jamesbuilds mx5? 😂

[@Justins_shed]

Did you use the chisels on the bastard who hit your car?

[@HewAndAwe]

Haha I wish, I was stationary she wasn’t paying attention in her huge SUV Turing my pride and joy into a category S total loss, I spent years making that car look good, now I have to fix it 😤

[@Justins_shed]

@@HewAndAwe Terrible news, mate. On the other hand, it’s potential content.

[@Nedswoodworks]

So….. can I send my chisels over Ben?? 😂😂😂🇦🇺🇦🇺🇦🇺🍻🍻🍻

[@HewAndAwe]

Haha …nah! 😂

[@jacobhicks7959]

Mirror finish, lol

[@HewAndAwe]

..at least you could see your boat in them.

[@prinzcairney6442]

😠 pr໐๓໐Ş๓

[@HewAndAwe]

What's this supposed to mean?

[@johnmcmunn3827]

A very edgy video ..might be me but I don't get the point !!! :)

[@HewAndAwe]

...wasn't sharp enough for you? ;-)