Choosing the Best | Gilles MUE2 Rearset

[@joeyjcalabrese]

My dude. You always have me holding my breath when you start snipping. 😱 mad props for doing your own work for real. 🙌🙌👍👍

[@ClutchFirst]

I’m afraid 😱 one day I’m going to snip one of my fingers. 😂 Nah, never that. Im not sure which is more satisfying, successfully finishing the install or the video. 🤣

[@LifewithAnnaBee]

I’m so glad you chose the rearset that’s easier to install. At least from the looks of it. No cursing was involved during the install. 🥰 Plus, I knew you had your heart set on Gilles the moment you opened the box. 😊

[@ClutchFirst]

The MUE2s were the clear winner once I saw the included heel guard. 😬

[@karlbuckley8346]

Nice parts! Gilles also make black anodized block off plates if you want to remove the Streetfighter wings.

[@ClutchFirst]

Thanks for the headsup. We do carry the entire Gilles Tooling product line on the motovationusa site.

[@brilliantspeedsuperbikes]

Is there a mistake? If you look at the nut to activate the brake and its bolt (at 7:48 with the blue loctite dripping down), they are both on top of the metal wedge. In the Gilles manual in diagram 4 and 5, they are both on top. But your video (11:26) shows the nut below the wedge like how you would fasten a regular bolt. Also, the 2021 Panigale V4S brake side (brake switch) is different. Just FYI. Otherwise, great video.

[@wellwonky]

As always, great video from you. Fellow SF V4s owner here from the UK. I found using a hairdryer to warm up the brake switch tabs helps get them out, but then everythings always cold in the UK! :)

[@ClutchFirst]

Hey Gavin great tip for removing the rear break sensor. During this entire install that’s the only thing that took a little finesse. thank you for watching. Subscribe and hit that Thumbs Up to help the channel grow.

[@vallanvhaylock6118]

Very professional 👍🏿

[@johnjacobs9753]

Great video!!!! Very thorough.

[@governordnyce3244]

Brother man Mike. When do you even have time for yourself?!? You are one busy man. We all benefit regardless. Been enjoying all your uploads on both channels. 👊🏽

[@ClutchFirst]

Smash that Thumbs Up for double uploads. You know how it is, always on the grind. 🙂🙌🏽

[@johnmackey7721]

Can you clarify that the kit from Motovationusa includes the carbon heal guards? The video seems to show the billet ones. Bellismoto has them with the billet guards for about $100 less. Motovationusa’s website says they come with the carbon ones but your video shows aluminum.

[@pcoakle1]

Great video, thanks for sharing!!

[@ClutchFirst]

All I have to say for this one is that “Nike” needs to cut me a check for that free promo. Lol The MUE2s are freaking awesome and perfect for anyone looking for versatility. Link in bio!

[@Dunc]

Where did you find the torque specs? My dealer would not provide them to me and I'm finding A LOT of loose bolts and a brand new bike with 3 miles on it. It's making me very apprehensive to ride it without being able to confirm that bolts are properly tightened. I just want to find basic stuff like rearsets, fork pinch bolts, axles, etc.

[@ClutchFirst]

You can partner with you local dealer parts team and they'll give you a full printout for the bike. Thank you for watching and don't forget to Subscribe!

[@jonathanlin2583]

I would’ve chosen this one too bud. Bless you for your patience 😅

[@ClutchFirst]

Picking the Gilles MUE2s was a no brainer. This job wasn’t too bad. 🙂

[@Treejm]

Thank you for the video. Is the peg as long as the stock?

[@ClutchFirst]

I'll check and measure the two when I get a chance. Subscribe and stay tuned.

[@Captain-Donut]

🙏❤️ Love from Scotland ❤️🙏

[@zuti46]

I need to correct you on 2:03 you wrote made in Germany....but the company is from Luxemburg....otherwise nice video

[@narutosasuke30]

Do you have MUE2 for 2023 ZX10R?

[@MotovationUSA]

Unfortunately Gilles does not offer the MUE2 for the 2023 ZX-10R. The do offer the FXR and we currently have one set in stock. Link here: www.motovationusa.com/fxr-adjustable-rearsets-by-gilles-tooling-kawasaki-zx-10r-FXR-K07-B Another option that we have had really good luck with is the Rearset from Bonamici Racing and we currently have 2 sets in stock. I will link it here: www.motovationusa.com/adjustable-rearsets-by-bonamici-kawasaki-zx10r-k021

[@narutosasuke30]

Which one would you recommend? Im planning to change my rearsets as current one start scraping at around 53-54 deg lean angle. Can i go higher upto 60 using gilles?

[@dp-ib1qs]

Not made in Germany!! Is a product of Luxemburg!!

[@MotovationUSA]

You are correct. Gilles is located in Luxemburg. Great catch! 🤙

[@finger1332]

Faut arrêter sérieux avec leur prix complètement délirant ça reste juste de l'aluminium taillé dans la masse rien ne justifie le prix...