CHOPPED & WIDENED! BEST BUDGET CHASSIS SWAP EVER! 1950 CHEVY ON A PONTIAC GTO FRAME!

[@CaseysCustoms]

PLEASE LIKE THE VIDEO!

[@channelofchannels7845]

Only if you paint it that patina doesn't look right it looks like a turd. I loved the other patina cars you built this one needs paint .

[@ianhoyt2638]

@@channelofchannels7845 I agree, this needs to be painted. I would also like it to have windows!

[@lezzistarsmith]

😂​

[@adventureswithedna]

I'm a little upset you used a hammer to break that window for the initial hit. Should have been an alternator or turbo in true Casey style

[@Shiftyspeedshop]

Stop YELLING

[@AnsonLight]

Work can wait, time to watch Casey fuck around in the shop 🤣

[@CaseysCustoms]

Getting paid to watch my videos is even better 🤣🤣🤣

[@matthewward3623]

Now that you've mentioned it.. I've probably been paid to watch every one of your videos 🤣

[@CaseysCustoms]

@@matthewward3623 🤣🤣

[@jhawk1985]

Doin it right now..... bout 20hr 😮😅

[@illililililillli]

​@@CaseysCustoms$44.78/hr to watch this vid right now 🤙

[@donlandenberg8126]

I'd have to say this has been the best chop on KZbin. Thanks for sharing with us.

[@CaseysCustoms]

🙌🙌

[@XrayDean]

Can you locate a junkyard roof from a donor roof to replace the widening in the center to where you have the meat on this roof? Keep doing what you’re doing! This is turning out bombtastic!

[@joesanders7567]

Literally my favorite chassis swap you've done so far man. If this ends up as a giveaway I pray to marvel jesus that I get it lol

[@SixPackDan]

bad news..... i already wished for it! LOL

[@Keasbeysknight]

man, if there was a way to not need those door pillars, that would look wicked! i wish glass wasnt so hard to do or was cheap. so many cool builds one could do

[@LburgVAGuy]

It did look really cool without the B pillers! I thought it looked epic without the roof and windshield

[@joedirt60]

THAT CHOP MAKES IT LOOK SOOOOO MUCH BETTER!!! AMAZING

[@DeadFlanders]

Would it work if you purchased two windows, cut them each, not in half, but more like 60/40, and used the 60% piece of each one so that you'd get a much wider windshield? You'd still need a trim piece down the middle, but that's not that uncommon on older cars, is it?

[@t.g.998]

That's what I was thinking too👍

[@pat1beau]

Heck yes,that’s what I would do

[@CaseysCustoms]

Yep, is the plan 👍 50 Oldsmobile glass is 1 piece instead of the 50 Chevy that’s 2 pieces, so the plan is get 2 Oldsmobile windshields and use 60% of each one and have a strip down the center where they will join, just like a stock 50 Chevy but it will be wider.

[@Jason1975ism]

I Love Every Line Of This CAR!!! You're an ARTIST who sculpts automotive clay into masterpieces of power and class with all the details of the artifact patina remaining. This car is Al Capone's dream car! It's amazing 😍

[@granny_shiftin_gears]

Bro i wanted to say thank you Casey you don't understand I have been going thru hell and struggling with my business as a mobile mechanic not alot of ppl have been needing there cars fixed stress is a mfker but you make my days better no diddy when I get a chance to sit back and watch your videos thank you you're funny asf I love the work your doing in the shop Hopefully I can get a break or maybe one of my videos go viral maybe one day I'll be famous 😂

[@CaseysCustoms]

Thank you very much for the touching (no diddy) words 🤣🤣 I’m surprised on the mobile mechanic lack of work i always said i thought that was a great business model. Soooo many people need brakes and shit done but don’t want to take their car to the shop for a day or two and wait

[@patrickcleary6731]

casey dropping that body saw tip down into that radiator while working on the back window .....good lord lol

[@ttdrummer14]

Killer build so far! Looking so so good. Love that you went with 3” and didn’t over do the chop 👌

[@Shiftyspeedshop]

That bodystyle is my favorite to chop, I've done several. I have always wanted to widen one but never had the guts to try. Keep up the good work. im looking forward to seeing how it comes out.

[@jg1701]

Daaaamn that chop made the car look 10000% better cant wait to see it all done!!👍🤘

[@HatedBreed000666]

More chop . Please . Make door glass same hight a a 44oz sonic cup

[@brendagaunce8757]

Love It Best looking old Chevy on the planet and will drive like it is on rails.

[@OzBull]

I was on the fence at the start didn't like the changes but after you did it looks awesome.

[@CaseysCustoms]

No worries, That’s kinda how all chops go, 1/2 the time you think you might of ruined the car 🤣

[@redson4928]

This is looking Sick Casey!!!!

[@eddiehelfert8722]

Nice job looking good

[@darrenbrown6880]

The chop going hard! The only thing i wouldve loved more is a pillarless door and another inch chopped in the back refer to 18:48 for the vision

[@Apti-Erhan]

27:53 awesome work dude👍🤙

[@greggsvintageworkshop8974]

The 50 Chevy looks AWESOME so far! She is going to be SO COOL!

[@stevenclay9573]

Angled Dr post is definitely a plus. Lookin good

[@MichaelWaggoner-qc5ur]

Love the 50,s Chevys. My first real car was a 54 bel air I wish I still had!

[@seancummings6379]

Dude you are an artist. This is my favorite build of yours so far.

[@anthonymurphy4360]

I just posted this on one of the other videos but the Olds winds hold it a one piece. Buy 2 and chop them into a longer 2 piece windshield. You only need and extra few inches in the middle from each one.

[@johnnycashh7148]

Between you and Ian, i love these rust bucket chops/builds!! 🍻

[@l_Lone-wolf_l]

I like all your projects, but this one is my favorite.. this is my dream car. I love it.

[@heidenfelderkustoms1502]

I was a skeptic when it came to chopping it. I like the stock look but I have to say this chop is an improvement and very tasteful. I’m really looking forward to the rest of this build.

[@joshuacantu101]

Dude this thing is really starting to come together I love how you pay attention to detail definitely my favorite build

[@Jasontodd74]

Didn't think I was gonna like this at all when you said '50's Chevy, but after you laid it out I seriously think it might be my favorite and that's saying a lot because I love the Blazer, CRX, F100 just to name current ones!! No time for others I liked. Be here all night!!! Do wish I had won the Porsche Ratrod!!!! Loved that body and can't remember the power but I could've always added more!!!😂 Thanks for all the great builds and videos!!!

[@bazilwreckerloughead]

LOVE the way that chop turned out, I mean the way that back window leans...WHAT!!

[@highoctanememe3617]

reminds me of the custom EFIJI holden proportions wise. kinda fitting with the chasis too

[@Jasontodd74]

That 2" looks huge to me!!! 3" just might be over the top bud!!! Careful with the top. Your gonna scratch the pai🧐, never mind!!! Chop looks so much better bud!!! I agree on the back a bit lower. I wouldn't wanna have to make the windshields to work. I don't like showing off and making stuff look easy either. I do a lot like you when people are watching.... All the fans and the paparazzi are bad enough as it is!!! Had to tell people Richard is the editor so people won't realize he is head of security!!! Hang in there bud!!! Your not alone!!!😎🤩

[@mightymikethebear]

It looks better as the project progresses!

[@donaldkidder4766]

One of the coolest things about all of the older rides is the fold-out vent window stop breaking the damn things

[@CaseysCustoms]

Awe, did you think the glass breaking in the vent window made the vent window bad? 🤣🤣🤣🤣 the glass is glued in on these, the vent window frames were taken out of the car and will be reused after the chop is done. So, i guess, stop assuming you know damn things?

[@timclapin3488]

i was thinking the standard roofline looks so good, but now with the chop and pillars leant forward it looks like a wicked car with new bad attitude, as it deserves with the great aussie base car underneath.

[@mk42grevious90]

9:41 you know seeing the windshield the way it is you could have done a dimpled bit of steel to make it more race car

[@driftvic3690]

Hey Casey! Love your videos! But I've been watching you for 8 months and I still haven't seen you finish a project 🤔

[@CaseysCustoms]

Damn you didn’t see the truck get finished? Or the Monte Carlo? Didn’t see the the 57 Chevy either. What about the race Camaro last week?

[@driftvic3690]

​@@CaseysCustomsDang... I wish my parents would have told me I was ret@rded

[@thomasj.kappjr.929]

I agree with the back another 1/2"

[@curtjeziorski350]

Very cool build! I have a g8 gt, great handling car. Your gonna love it!

[@-ChadHosteter78]

Looking good Casey!!!!!👏👏👏👏

[@BudFranks-fu9ye]

I love that car. So badass👍go 1950 Chevy👍💯

[@onewheelpeelproductions470]

I found two kittens that small in my Baja bug project years ago and had to do the whole bottle feeding routine with them, they are big and healthy now. The Baja bug is still waiting for me to finish it tho 😅

[@CaseysCustoms]

That’s how it goes sometimes lol

[@brokenbackunlimited2187]

Very cool. I had my doubts about the chop, but I'm impressed.👍👍👍

[@janih777]

That chop looks SO GOOD!!! Daymn

[@lukebirmingham9387]

That car would look great in a deep dark red . And all the crome redone.

[@JohnJones-ep7of]

Somebody out there needed that side window corner glass !

[@rageher0135]

As soon as I saw it chopped I couldn’t help but think of the car from “Cool World” from the 90s….on that note, it’s waay past my bedtime. Keep up the killer work

[@DennisMurphey]

OK you got me on this one. Enough ford's. Thinking a late model GTO donor for a 50s 50s Chevy short bed step side P.U. for you next body swap. Any interest? Really like to see you use the C5 transaxle somewhere. Gives better weight transfer. Maybe into a 80s El Camino with a warmed up SBC. That would be cool. Torque tube etc.

[@torch3073]

Love this build

[@thercbarn5001]

Looking good! Love the chop! Mike c

[@ryanknutson1396]

That’s such a good looking car!! I really like it!!

[@skaughtmc6591]

Just to add a little more complexity, I think the trunk lid needs to be pancaked down. The current really low sleek lines without look good.

[@CaseysCustoms]

Yea trunk and hood might end up getting a little cut too lol

[@HitokiriRaiden]

Gonna be a fun ride when its done. Looks awesome.

[@impala6524]

Great job on the chop👍🏾

[@daveunbranded]

Agreed 100% Back needed to come down about 1.25

[@richardwelcher4836]

Now you need fender skirts!

[@kerrypierre9494]

WOW!!!!!! You did a great job on the chop, looks killer. Keep up the great work bro.👌👍🤘🔥🔥🔥🔥🔥

[@lukasgarage956]

Way cool.

[@rolandbois2300]

Nise good job ❤😂

[@scottblackwell157]

Looking cool my friend!!

[@mikemadison2747]

I'm ready to see it do a gnarly burnout. I like the chop. I think I even liked it better without the post..? I might just need to see it when it's all one piece, :D

[@bobhaynes915]

Just curious if you've considered putting the windshield on the back and using something g wider for the front

[@shaqfoomusic816]

Casey local fan from kc love your work I hope you finish this one!! Do a quality paint job this is a grade a build!

[@papercut138]

Casey's custom is first! All other videos can wait!👍👍👍

[@justin_bollman]

Damn that is looking good

[@rodrocket8216]

Lookin good. Should keep this 1.

[@LetGaiaLive]

That looks really good!

[@bennystaton7477]

Could you not change the windshield to the 2peace like the older ones

[@slowblueoval1997]

Man the chop looks awesome.

[@mattcrotts8370]

This thing is looking so good!

[@Jasontodd74]

Order that Temu welder that's the shape of a large drill. I don't see it working but I think its basically free with all the sales or discounts. Long story but I can't order. Lol. So wanna see if it's worth anything!!!

[@tealcheif1949]

Very cool! Nice job.

[@joedirt60]

I love this car!!!!!!

[@mrandres7271]

Gotta say i watch your stuff cause most youtubers only post once every few weeks some even monthly so do what you can keep doimg what your doing cars are looking better and better

[@davidweidner1675]

She is looking sweet! Lekka Casey

[@christophergreen8990]

Do a square body s10 4 door lomg wheel base dually

[@markpaterson-v3m]

Looking awesome

[@mudlakeoutdoors2497]

Casey you need to get yourself a couple cable cranes at HF. They are the bomb when working by yourself.

[@jamiereizenstein8471]

Can’t wait for the giveaway on this one! Love it!

[@Hootman865]

It looks good man, is there a way to drop the nose of the hood without going overboard

[@garyrobison1518]

Looking Good!!!

[@baconandbourbon9395]

Are you going to section and pancake the nose of the hood too to go with the sleek chop?

[@joelfossheim2425]

This is the sickest car on the planet. I love the g8 gt

[@joedirt60]

I love this car !!!!!!!!!

[@miketodesco6915]

Its a masterpiece, Casey!

[@davidsolloway9349]

Like 147 ! Nice job, very creative.

[@jaredscott5220]

Casey man this is looking awesome good job

[@JMGilberto]

3:22 spikes air saw into unprotected radiator. Ouch.

[@LobbyDaLobster]

*Hey Richard!* We need a super cut of Casey saying "Roof". Thank you kindly.

[@larryspencer1684]

Looks badass

[@PaulDunen]

just love it,hope you do a giveaway on this one,

[@BudFranks-fu9ye]

Oh shit😲I just fell in love all over again after that chop❤️👍👊

[@ernestomejia110]

how do you plan on doing the glass for the windows?

[@MichaelSmith-wb1es]

I like it as is with no post and at that height. Well never mind. You just started cutting the back.

[@alanr4863]

Well done

[@benniesmith1719]

What's up with the 50 chevy? Haven't seen any updates

[@richardbrowne3641]

I am starting to like the body swap chop.

[@buickapollo455]

Why not put upper door frame on , to roof go hard top. No pillars ?

[@paulcollins7030]

I wish I had money a place and tools n skills to do this stuff I have soo many great ideas with cars