CHOPPIN UP A BRAND NEW TOYOTA

[@wymershandymanservice9965]

Great content nice shop. I remember what my dad told me when I came home from the Marine Corps 1978. I was going to build my own house and he said don’t make the same mistake we all do. Build your shop make sure you have the facility to make you a proper living then build that house. He was right built my shop used it to build a house make a living send 4 children and a wife to college. If being your own boss and making your living doing it then a proper shop has to be step one.

[@austinatkins408]

Wymer’s Handy Man Service well said!

[@robsdeviceunknown]

I just did some welding today. I love welding. I do horrible with not a single lesson and using a Harbor freight MIG. Then I come in for the day and see your really nice welds and realize I REALLY suck lol.

[@es47]

Man seeing your old shop in vids from b4 and now old looks small nice video keep them comming

[@peterfairhurst]

Any off-roading and it will still rub. I had to knock back the pinch weld which I sprayed with a 3M product for water proofing, remolded the fender liner with a heat gun, trimmed back the plastic on that outside edge you were showing, add finally added more caster to the UCA. It's a process.

[@throughjackscamera4432]

This is what I want a flat bed for, thank you for your build vids!

[@SUMMIT556]

2005 through current Tacoma's need the cab mount chop so lots of potential customers there haha

[@samuelchartier3684]

Glad to see your doing well, that new table is sick!!

[@mikestrucks]

As usual you did a awesome job 👏🏻 I really like your new shop 😬👍

[@willcrosbie8806]

Another idea for the plasma table is the Yamaha banshee grill inserts they make every different kind out there you could make whatever for them

[@KyleMorpheus]

really clean metal work 👍

[@Sackmatters]

Nice and simple fix. Love it.

[@tracefuqua3651]

Maybe cut out and weld up a diamond or octagonal stack with the Cummins “C” cut out of it to where you can see through the stack? Just an idea. Awesome video as usual 👌

[@Eric2300jeep]

That would be sick! Definitely like the idea of an octagonal stack

[@SCOOPFREE]

You might as well start building complete custom cars for people. ... anybody watching your channel for sometime would see the work ethic and transparency on everything you do.

[@willtran6624]

Awesome work, if possible the owner should dial in more caster to puush that wheel up more to gain additional clearance between the cab mount

[@figifister]

Your new shop is sweet man. That's what I wanted to have before I got married....she's worth it! Lol

[@weldingjunkie]

figifister is she though lol? Sometimes I wonder 😂

[@figifister]

@@weldingjunkie lol right

[@Brighton_Lal]

Just ordered your BMC plates for my tundra. Cant wait to get some tuning for my 06 5.9L mega cab

[@aaronraymond5121]

Love the new shop and maybe some ladder bar tabs and mounts for us diesel truck guys haha

[@Cumminslife]

Yeah definitely will get some traction bar brackets on the go.

[@willcrosbie8806]

Diversity is how u make money 💰👍 good hustle guy

[@DirectCurrent4u]

I can't wait to get my 6 position tune from you for my 05 Commons.!

[@AustenARW]

Nice work man, always enjoy your vids.

[@Viltrakisdesignbuild]

Curious if the rubbing issue was fixed completely, I noticed what I thought was wear marks on the mud flaps and rubbing on plastic is often louder than metal. Did the mud flap tabs you built let it mount further back at all?

[@tedbownas2748]

That's what I found on my '09 Chevrolet 2500. I was getting all kinds of awful noise from the tires rubbing at full turn, and it sounded like a hard metal rub, but I finally figured out it was just a little flap of plastic. Made a hell of a racket.

[@Tacoexplorer]

No way you can use mudflaps. The purpose of a cab mount chop is to gain clearance. Mudflaps reduce that clearance. Can’t run them unless you want rubbing.

[@DieselRamcharger]

you should wrap a wet rag around the body bushing {if you don't remove it} when you weld it. It'll save the bushings, just keep an eye on the rag to make sure it hasn't dried out from the heat.

[@outlawjoseywales6159]

Great ideas and great fabrication/skills!!

[@impossiblegarage9400]

Hell yeah a yotaaaaa

[@allenthomas5479]

I did the exact same thing a few months back. but made my own plates

[@Cumminslife]

Yeah I would have made my own plates too but they where supplied.

[@sixtyfiveford]

Looks great.

[@jeremiahnurrenbern9921]

The other vehicle you are probably thinking of is the 4Runner if I’m not mistaking they have the same drivetrain.

[@claytonsuarez8276]

Company I worked for, for about a year-1/2 used the exact same program, drawing and cutting. But when our plasma would cut off we would have to rerun the whole plasma from start. 🤦🏼‍♂️ It was a pain but I sure do miss it.

[@wolfman5494]

A trick i use to steal accurate dimensions off stuff is take 1-3 axis worth of straight on pictures with a tape measure laying somewhere near for scale. You can drop them onto the different origin planes in whatever CAD program, scale them up or down using the tape measure, then just trace the shape. I've used it to quick mock up circuit boards for component clearance; its pretty handy.

[@Cumminslife]

Yup that's exactly what I did!

[@jakegingrich7214]

Having removed and installed my fair share of service bodies, I would love to see how the manufactuer those frame mounts, crossmembers and such, they are always the strangest shapes.

[@wopperchopper]

Second gen rear bumper 🤘🏽😁

[@abrahamsalcido9174]

Keep up the Great work. Great Video.

[@darinschmidt6456]

The 5th gen 4runner as well . I'll have to get mine from you next year . Great job man 🇨🇦

[@ryantheentrepreneur4040]

Nice new shop

[@Eric2300jeep]

Walter wheels are the shit 😎

[@chriswells1055]

How much are the cummins logo cutouts like what is on the plasma table

[@ien2023]

Things we do to look cool.

[@maximilian.R]

Do you know what type of steel is the plate you are welding? And, do you know how well the cabin mount will be reinforced after welding that plate? I believe the bottom steel plate of that cabin mount is ultra high strength steel of 780 MPa, while the top cup steel is high strength steel of 440 MPa. That is some special steel that you can't just simply weld on, as the weld heat will turn the HSS into mild steel. When one gets hit from a front corner angle, and into the cabin, that cabin mount is the thing that helps the cabin from being destroyed really bad, and the legs from being crushed, from the corner hit. Any info on that plate that you bought and the procedure? Been looking into this mod., as well. Thank you.

[@pjgardner9844]

Sorry I,am new but at 0:02 do you always have a spare transmission for you Cummins???

[@Cumminslife]

My truck has nv5600, thats just a 47re im building for another truck

[@tonyhawk8461]

paxton gardner hahahah. He has to carry a spare because it’s a dodge. Haha. I’m not a hater. It’s all fun and game s 🙃

[@MrJeb707]

Lol nice, I have that same grinder 👌

[@phillipdeist9183]

Nice work. What band are u always listening too in the shop?

[@paintballfan109]

Love the content man, your welds are really clean

[@SilentGamer-jt8dl]

Damn you do good work man, you deserve way more subs

[@kyles2388]

Loving the content man! Keep it up!

[@jmvkeft5243]

Nice grinder on the desk haha

[@JasonTheMunicipalMechanic]

What do you charge for something like this? Being it’s not a huge job it would seem to take more time then its worth.

[@throughjackscamera4432]

Usually 80-100 plus tabs around Florida.

[@shawnphillips4473]

if you lived closer id have you do mine . great job

[@SteveLShannon]

Are you selling the metal cummins C?

[@dirkdejong8421]

It seems that in order to duplicate the original Toyota structure , you should make your plates with slots in the shape of that square portion on the bottom and plug weld through the slots.

[@bostonbmx6490]

Lmao I got one missing mud flap on my 2012 Tacoma used but seriously only 3!

[@MisterSlowGo]

Hey bro I was wondering about your 6 position tunes. I got a 04 Cummins and wondering if you could set one up and ship it to me. How much would that run. 2004 Cummins completely stock. Thanks bro really like your videos

[@Cumminslife]

Sure man send me an email. [e-mail]

[@rinkelton]

Nice work!, What size are those tires?

[@Sackmatters]

You should print out some cummins duramax and powerstroke plates in various sizes. In steel and aluminum. If you did a cummins I’d buy one in aluminum and weld it to my flatbed.

[@Cumminslife]

Sure I could do that. No powerstrokes tho

[@tonyhawk8461]

Optimal Welding hahahah. “No powerstrokes though”😂😂🙃

[@Alientraveler003]

Awesome

[@miguelsanchez689]

Awesome vid how much did you charge the customer interested in doing this to my taco

[@TheRooster1122]

SWEET

[@gregoryunderwood4121]

Great job!! You sound just like Steve Buscemi.

[@MrTimbospice]

where are you located? i would want to have this done on my truck

[@clapped12valve]

Cranbrook

[@ajaxracing]

Hey how do I get a set of these plates from you looks like they will work on a Gx470 I'm working on

[@Cumminslife]

Send me an email! [e-mail]

[@jmunguia767]

I need pair of those plates. Need to do my cmc.

[@TheRitchieLeeShow]

Dude Toyotas are maybe the most well made vehicles, but they can't be compared to a Cummins.

[@Estud52]

Where’d you learn to weld?

[@IamEmmett]

i wonder how much that costs

[@toku58]

Where can I get a set of those plates?

[@owenarsenault5955]

Diff covers are a good one. A 3/8 plate fabricated diff cover can take a beating. Ask me how I know.....

[@Cumminslife]

Great idea!

[@Sackmatters]

Owen Arsenault as long as it has proper bends and radius for the ring gear to lube properly.

[@owenarsenault5955]

@@Sackmatters I never had problems with lubrication.

[@Sackmatters]

Owen Arsenault if it’s a almost strictly off-road rig I doubt it’ll cause issues but me running a 1 ton pickup pulling around my gooseneck. Things tend to get quite warm if they don’t flow smoothly.

[@owenarsenault5955]

@@SackmattersThey did go a offroad truck, I made them so they held 1 liter more oil. Never had a problem

[@DieselRamcharger]

get a scanner and you can scan that shit right into fusion or corel. easy peasy.

[@Tradewerk]

What color is this truck?

[@ronrambo7834]

why does that little tire rub matter.. if it was rubbing bad the paint would be worn...you won't own that truck long enough that it would make any difference

[@kawasakiwhiptwo5821]

I would have found a way of welding (incorporating) that (looks to b 1- 1/4") tubing into the new plate,for added strength. Don't think I'd like it just floating around on the other side of that new plate. Just Saying.

[@chapekfabrication2975]

Your voice changes from Australian to Californian, like elon musk

[@jacknimble1]

You would assume that whoever has the skills and tools to install those plates would also be able to make their own without buying them.

[@XYourBest]

Sounded like the owner of the Toyota brought them to the shop with him to install.

[@Cumminslife]

Exactly what I thought. They where supplied though so saved me a little work.

[@muchogracious1557]

Is there anything you can't do? Lol

[@h5y]

Nice work, but the owner of this truck must hate warrenty. They've void everything

[@MattAlmanza4786]

That’s why you don’t put big ass tires on that pos

[@tonyhawk8461]

I hope you used the boosted Lincoln for this job. 🙃

[@Cumminslife]

I would have if i was outside

[@donovanchaas9100]

He’s got a fat grinder on his ‘puter table

[@genius-no5sl]

Dude don’t touch it !

[@clapped12valve]

Song at 7:40?

[@TimberTramp]

Mud flaps look like shit anyway!

[@MLGtroll365]

4 dislikes. ??? How 😮

[@duttydiesel8303]

:( Where's The Cummins Content?!? With a picture of the Cummins logo I am disappointed the Toyota wasn't Cummins powered.... or being "chopped up" to install a Cummins engine!!! Very misleading.