I cannot imagine myself choosing black after finally having options.
@ClaburP2 ай бұрын
Sounds really good. Perfect amount of ”hair” on the clean sound 👍
@rickjette9482Ай бұрын
Imagine if you were in charge of color coordinating all the equipment on the stage! Make up your friggin' mind Chris!😄
@joshscott32713 ай бұрын
A very good day was had...Winning!!!
@gonzopewpew78383 ай бұрын
That sounds amazing. Chris sounds pretty good too.
@leeevans78142 ай бұрын
Black all the way. Think you made the right choice. Can't wait to see it buddy
@BLMiwa3 ай бұрын
Does Victory not have an app where you can swap the various options and see what it will look like? With that many options it seems like a must have!
@LiamJamesSilcock2 ай бұрын
They do, go to the victory website, go to the amps tab, MK Family. Then get customising! I have spent the afternoon making up some custom MK Cleans 🤤 Then I remembered I can't afford one 😂 My V140 does me just fine and is a fantastic amp I'm it's own right, I just kinda wish I could flip the reverb tank in the V140, cause the reverb in the MK sounds Fantastic orientated that way 🎸
@andertons2 ай бұрын
It’s on the Victory web site 👍
@fallendbb2 ай бұрын
Chris Buck has been my favourite guitar of the last several years and I cannot get enough of cardinal blacks album. That was until he says he’s an arsenal fan. What a shame
@okayguitarplayer2 ай бұрын
Amps aside.... Am I the only one who wants him to have his hair down one of these days? I bet it flows like liquid silk, cascading in shimmering waves, embodying elegance and natural beauty with every graceful movement
@Robstafarian2 ай бұрын
The fan fiction writes itself, eh?
@compucorder642 ай бұрын
Nice sounding amp. I wonder what the difference is between the MK Clean & say the Super Duchess? I have the normal V40 Duchess, and really like it as my loud clean Fender-style amp. But I'm not playing those bigger gigs that would call for more clean headroom. But I think I hear at least some of the same amp family clean tone. Pure, solid, clean, dynamic and articulate on the attack but smooth on the sustain. These Victory clean amps are very responsive to different guitar and pedal tones. Whereas, my Marshall JTM tends to imprint all drives/fuzzes tones with a JTM-ey flavour (plump, warm, vocal, slightly fuzzy around the deep bass and high treble edges). Which I do like, but it's no Chameleon.
@RyRobCon2 ай бұрын
Gorgeous looking and sounding amp with truly horrendous logo
@steved10992 ай бұрын
A dream day out for us guitarists.... come along and play some great gear and spec it to your own desire. So jealous....
@GCKelloch2 ай бұрын
If nothings else, Rock & Roll is about bucking senseless, oppressive traditions. That includes the foolish superstition about green being unlucky. I think it looks great and it would inspire me every time I see it. Consider who came up with these superstitions, and why. A standard or inverted blond/oxblood might be cool, too. Bright colors might even be nice. Maybe the Gulf Porsche baby blue & orange? Soichiro Honda wasn't afraid to wear bright colors. Look what he created.
@GertvanderDoes2 ай бұрын
I guess that's why most rockers buy reissues and relics or humongously expensive originals of the guitars and amps everybody used since the 50s. Real progressive bunch.😂
@GCKelloch2 ай бұрын
@@GertvanderDoes Yeah, and I'm skeptical of what justifies the ~$5k price tag, other than the hype that can make some players with some money think they hear something "magical" that can only be had with NOS parts (which were notoriously unreliable and off spec). More often than not, what is actually different is the higher Carbon comp resistor noise and/or transformer hum, which doesn't cost any more to recreate with modern parts. Careful attention to soldering and wire placement are important, but not for $5K. The profit margin must be insane. Still, nowhere near as greedy as that BS artist HD was. Just reading the construction method on the Victory site. Au-plated connectors are actually inferior to Ni-plated. The increased conductivity of Au is irrelevant compared to tube plate resistance, but it does wear quicker -- not the best choice for tube sockets. The Brass underneath is still conductive, but can grab and break, tube pins when the Au wears off. I had an old Brass guitar cable connector break an A/I unit jack when pulled out. Having custom transformers made can be a big upfront investment, but Demeter only specifies sets of 5 pricing made to customer specs, so nope. Not a big investment there, and very reasonably priced as well. Looks like Rubycon Aluminum Electrolytic caps in the PS section. Those are at least $5 ea and well worth the cost for reliability. Every amp should use quality metal PS caps, but they don't. Leaky PS caps can destroy an amp.
@krameree19693 ай бұрын
When are Victory going to do this as a V4 pedal amp?????
@dividedbytimestudios3 ай бұрын
If the Guys at Victory are smart they are probably revamping all the V4 preamp pedals right now and adding an IR on the back end for anyone who wants the “Iridium” style pedal
@MNGuitars2 ай бұрын
@@dividedbytimestudiosthey should just add that to all they’re amps period, or make it an option
@CorbCorbin2 ай бұрын
@@dividedbytimestudios They already have an out. The point is that it’s analog. They should put at least the 6 option cab sim, to use going out. They sell these modelers on having so many amp options, but when I find the amp I like, it’s the only one I play, unless I’m going stereo. I agree, just go ahead and put the IR too, like Friedman did, and I think the Volt might have. For a Victory quality amp, with the IR, even just a three option one, would make it worth the extra money. The best modeled tone, that I’ve ever heard, is using a DI cab sim out, on a tube amp. The Evmater Rebel, which is a great sounding amp, with a lot of options, but isn’t built very well, has a DI cab sim out, and it sounded best to 20 people in the store, where I talked the owner into doing an A/B, with the Iridium, Walrus ACS1, Friedman IR X, a Helix, a Quad Cortex and the Boss Katana. All 20 of us, thought it was obviously better, and it wasn’t really close. Both through headphones, going through pro tools, or through a cab, and even through a powered speaker. The cab sim, that has an actual combo amp’s pre and power section as the tone, was just better. That amp also has a voicing knob, to go from Fender to Marshall tones. It works really well too. Yet, the PCB boards are junk, just like with the Marshall DSL40C, that sounds great, and can do so many tones, but will just shut down randomly, and costs too much to fix.
@CorbCorbin2 ай бұрын
@@MNGuitars All amps, over a certain price, should all have at least a cab sim out. It’s not that expensive to do, and they work great.
@rainerschmitt4562 ай бұрын
what a lovely twinkle to DP 😁
@nekkon19892 ай бұрын
There's a lot of white noise if you listen with headphones... 🎧 Sounds great though
@CorbCorbin2 ай бұрын
That’s your headphones.
@nekkon19892 ай бұрын
@@CorbCorbin kindly lend me yours so as to double check?
@tollan23Ай бұрын
Why is green unlucky?
@Utube-g3g2 ай бұрын
Silver? Burnt orange?
@classicraceruk13378 күн бұрын
Get rid of the purple, a tiny cheeky quip to someone I think Chris!!!