Best EDGE LIT Diffuser Channel on Amazon 2023 - LED Light Strip Diffuser

🚨 AMAZON’s BEST DEALS (updated daily): bit.ly/3VWZKVS
☑️ Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chris...
Edge Lit Profile Amazon: amzn.to/3qgYdNe
Edge Lit Profile Company Site: bit.ly/44qUjQ8
Best Regular LED Strip Diffuser:
Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz
Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
5% Discount Code: CHRISMAHER Spotless Diffuser Channel 1m or 2m Muzata LED Store: bit.ly/3NHG5Uw
Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf
Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q
5% Discount Code: CHRISMAHER Spotless Corner Diffuser Channel 1m or 2m Company Site: bit.ly/3D3yI4R
LED Lights Amazon: amzn.to/3v9jk2G
LED Lights AliExpress: s.click.aliexp...
Best Regular Diffuser Channel: amzn.to/3uYO8ml
=============================
Support My Channel Directly:
Become a monthly contributor on Patreon: / chrismaherdiy
Buy me a Coffee: paypal.me/Chri...
==============================
How To Solder Video: • THE BEST Soldering Tut...
WLED on ESP32 Video: • How To Install WLED on...
Other Materials:
ESP32 Board: amzn.to/3uDP1ln
18 Gauge Silicone Wires: amzn.to/3Keoel3
Wago Connectors: amzn.to/3vgFBeF
Micro USB cable: amzn.to/3jCLhtY
Big Power Supply: amzn.to/3uGPKSK
Wall Plug for Big Power Supply: amzn.to/3jCaXae
Medium Power Supply: amzn.to/3KKjAeV
Wire Stripper: amzn.to/3uHP4g4
Soldering Iron: amzn.to/3jxx1mB
Solder: amzn.to/3r6smMA
Solder Smoker Absorber: amzn.to/3rbHCYp
Helping Hands: amzn.to/3v19YG3
Heat Shrink Tubing: amzn.to/3733zSH
Other Videos I Have Made:
Govee M1 Led Strip: • GOVEE M1 - The BEST Pl...
Govee T2 TV Kit: • Govee T2 - Sync Entire...
Best Diffuser Channel on Amazon: • NO HOTSPOTS - Best Dif...
12v LEDs with WLED: • 12v WS2815 with WLED /...
Best Edge Lit Diffuser Channel on Amazon: • Best EDGE LIT Diffuser...
Best Flexible Diffuser Material Ever?! • DIY Mod - Best LED Fle...
DIY Diffuser Channel: • EASY DIY Diffuser Chan...
DIY Ground Level Deck with LEDs: • DIY Ground Level Deck ...
DIY Board and Batten video: • DIY LED Board and Batt...
How-To Video for the LED Pegboard Project: • DIY LED Music Visualiz...
DIY LED Baseboard Trim: • DIY RGB BASEBOARD TRIM...
RGB Lamp Hack: • Easy RGB Lamp Hack - A...
Corner LED Light using Pex Tubes: • Crazy DIY Light - Comp...
DIY Govee Glide using only paper: • DIY GOVEE GLIDE / LIFX...
Simple Corner LED Project: • Easy DIY Corner Lights...
DIY Customizable Light Up Images: • DIY LED Lightbox - Ful...
LED Strip Diffuser Ideas: • DIY LED STRIP DIFFUSER...
DIY Hexagon Project: • Making My Own Version ...
DIY Edge Lit Designs: • DIY LED Gaming Room Li...
DIY Black Acrylic Floating Shelves: • DIY Nanoleaf - Black L...
Other LED Tutorial Videos:
Installing WLED on esp8266: • How to install WLED on...
Power Options for LED Strips: • Power LED Lights + Inj...
Use WLED with Govee Lights: • Control Govee Strip Li...
Re-Use Leftover LED Strips: • Power Leftover LED Str...
Unboxing Videos:
Sync Entire Room with Govee Immersion: • Sync Entire Room with ...
Divoom Pixel Art: • Pixel Art - My New Fav...
Govee Glide: • Govee Glide Wall Light...
Govee Lyra: • Govee Lyra Floor Lamp ...
Govee Hexa: • Govee Glide Hexagon Li...
Govee 3d: • Govee Hexa 3D Light Pa...
Lytmi Neo 2.0: • Amazing TV LED Syncbox...
Tiki Torch Bluetooth Lights: • Bluetooth Speaker / Ti...
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

[@ChrisMaherDIY]

🚨 AMAZON’s BEST DEALS (updated daily): bit.ly/3VWZKVS ☑ Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher Edge Lit Profile Amazon: amzn.to/3qgYdNe Edge Lit Profile Company Site: bit.ly/44qUjQ8 Best Regular LED Strip Diffuser: Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb 5% Discount Code: CHRISMAHER Spotless Diffuser Channel 1m or 2m Company Site bit.ly/3NHG5Uw Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q 5% Discount Code: CHRISMAHER Spotless Corner Diffuser Channel 1m or 2m Company Site: bit.ly/3D3yI4R LED Lights Amazon: amzn.to/3v9jk2G LED Lights AliExpress: s.click.aliexpress.com/e/_DnBQWTD Best Regular Diffuser Channel: amzn.to/3uYO8ml ============================= Support My Channel Directly: Become a monthly contributor on Patreon: www.patreon.com/ChrisMaherDIY Buy me a Coffee: paypal.me/ChrisMaherDIY ============================== How To Solder Video: kzbin.info/www/bejne/l6G2q2aEjb6frpo WLED on ESP32 Video: kzbin.info/www/bejne/ioCon3mBgdJsidk Other Materials: ESP32 Board: amzn.to/3uDP1ln 18 Gauge Silicone Wires: amzn.to/3Keoel3 Wago Connectors: amzn.to/3vgFBeF Micro USB cable: amzn.to/3jCLhtY Big Power Supply: amzn.to/3uGPKSK Wall Plug for Big Power Supply: amzn.to/3jCaXae Medium Power Supply: amzn.to/3KKjAeV Wire Stripper: amzn.to/3uHP4g4 Soldering Iron: amzn.to/3jxx1mB Solder: amzn.to/3r6smMA Solder Smoker Absorber: amzn.to/3rbHCYp Helping Hands: amzn.to/3v19YG3 Heat Shrink Tubing: amzn.to/3733zSH Other Videos I Have Made: Govee M1 Led Strip: kzbin.info/www/bejne/jpmwn36MpqZ8jdk Govee T2 TV Kit: kzbin.info/www/bejne/n2enoWx3gbZ_icU Best Diffuser Channel on Amazon: kzbin.info/www/bejne/Z4SuoJJ-mbCJj6M 12v LEDs with WLED: kzbin.info/www/bejne/sJPLlXtjprh0hMU Best Edge Lit Diffuser Channel on Amazon: kzbin.info/www/bejne/fH-nmp6qbLuZiNk Best Flexible Diffuser Material Ever?! kzbin.info/www/bejne/r3mnp6Rtr6d4pbM DIY Diffuser Channel: kzbin.info/www/bejne/hYLZZIGZgr6ja8k DIY Ground Level Deck with LEDs: kzbin.info/www/bejne/nZPSnKuffqp2prc DIY Board and Batten video: kzbin.info/www/bejne/mGKWh3-fgJx0hbc How-To Video for the LED Pegboard Project: kzbin.info/www/bejne/gWWoq39_Zst5pLM DIY LED Baseboard Trim: kzbin.info/www/bejne/f5ybeaF9rcuEp5I RGB Lamp Hack: kzbin.info/www/bejne/i3-zg5Jvbd1_h7s Corner LED Light using Pex Tubes: kzbin.info/www/bejne/qHrFha2LeZd4as0 DIY Govee Glide using only paper: kzbin.info/www/bejne/pGqvpJyHdrd5l9U Simple Corner LED Project: kzbin.info/www/bejne/kHOYeaSNnbKLhNE DIY Customizable Light Up Images: kzbin.info/www/bejne/aKLCq6V7mMeLfqc LED Strip Diffuser Ideas: kzbin.info/www/bejne/ZmqQl5yNn7VnaLs DIY Hexagon Project: kzbin.info/www/bejne/qmrbeKx4acabr7s DIY Edge Lit Designs: kzbin.info/www/bejne/ZpC3pXuhd6dmrKM DIY Black Acrylic Floating Shelves: kzbin.info/www/bejne/bJTWhICqi8SippI Other LED Tutorial Videos: Installing WLED on esp8266: kzbin.info/www/bejne/ommyfpxtiLKjp9U Power Options for LED Strips: kzbin.info/www/bejne/gXfXm5lroqlpqqM Use WLED with Govee Lights: kzbin.info/www/bejne/omHWg3pnjKaVp5I Re-Use Leftover LED Strips: kzbin.info/www/bejne/d4TRpp5jjamJmKs Unboxing Videos: Sync Entire Room with Govee Immersion: kzbin.info/www/bejne/sKW7qomLjtt7ick Divoom Pixel Art: kzbin.info/www/bejne/m2raZnmCnsuamrc Govee Glide: kzbin.info/www/bejne/m2TNe6ybYsuMpa8 Govee Lyra: kzbin.info/www/bejne/hHeniq1pbL-ijrc Govee Hexa: kzbin.info/www/bejne/i3W8hqmcmMpnqq8 Govee 3d: kzbin.info/www/bejne/eYqXpH6Hpd2Dfrs Lytmi Neo 2.0: kzbin.info/www/bejne/qaXLXniaesuGn9U Tiki Torch Bluetooth Lights: kzbin.info/www/bejne/pYu1o4uGmamgfdk The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

[@jonny490]

Must be US only, always unavailable in the UK :(

[@grumpySafa]

Hi Chris, I have learnt a fair bit from your videos and thank you for sharing your knowledge. I was hoping if you can help, your products about Muzata are not available in the UK and have been struggling to find anything similar. Have you come across any other products that is similar quality which is sold in Amazon UK or even Alibaba? Any help would be great. Thank you.

[@wickedlammy]

Chris will the govee M1 strip fit this?

[@ChrisMaherDIY]

@@wickedlammy it will not. The Govee m1 is a little too big!

[@ChrisMaherDIY]

@@wickedlammy also it wouldn't look that great even if it did fit since the Govee m1 has 60 LEDs per meter.

[@seanaugustinemarch1]

Wow, finally a diffuser that actually diffuses LEDs!

[@ChrisMaherDIY]

Its definitely a good one! Just wish it was not so expensive!

[@harj-spp8547]

What a find! Looks like a product for commercial use, but works so well for domestic use too. The diffusion looks so good too, passing light all the way through. I''ve been having ideas to create some similar as fascia boards for our porch and this product may enable that into fruition. Thanks for the share and cant wait to see what you plan on doing with them next!

[@ChrisMaherDIY]

They really do look amazing! So many possible applications! Looks like they sold out of them already. Hopefully a re-stock will be coming soon! Thanks for watching!!

[@nestomagic]

@@ChrisMaherDIY still no re-stock this is so sad

[@ultimomos5918]

not me accidentally stumbling across your channel and going down the rabbit hole of custom lighting my entire apartment

[@ChrisMaherDIY]

Hahaha its a fun hobby for sure! Hope you enjoy it as much as I have! Thanks for watching!

[@jakemeyer8188]

You are the MAN for doing all these diffuser tests. I too have been trying to score the most perfect diffused setup, but haven't been able to afford try too many things. I REALLY appreciate you taking one (or two!) for the team, and trying them out for me.

[@ChrisMaherDIY]

You are very welcome! Its a fun hobby for sure. I just wish these were not so expensive. At some point I'm for sure going to try doing a DIY version of this and see how it turns out!

[@CBooth90210]

I just instantly liked this because it's 3:31. Thank you for getting to the point quickly.

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video! Lol yeah I generally like to just jump right in!

[@markabarca5520]

youtube algorithm blessed me with this one. appreciate your hard work bro

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! I'm glad you are liking the videos!!

[@Calamari_]

My friends and I have started looking into LEDs for our "gamer house", and your channel is an absolute GODSEND for us. Thank you for making the content that you do!

[@ChrisMaherDIY]

Thanks so much for watching and glad you are liking the videos! Hopefully you are documenting the game house setups because that would be awesome to see how it all comes together! Thanks for all the kind words!

[@mikeoleksa]

Being a PC modder obsessed with RGB lights, these open up a lot of new ideas to go with my custom liquid cooling loop and PC case itself. Especially with my 360mm x 120mm flat, clear reservoir. It's a EKWB EK-Quantum Volume FLT 360 Reservoir, for reference. I'd leave an Amazon link, but KZbin likes to randomly delete comments that have them.

[@ChrisMaherDIY]

I love looking at the crazy setups people come up with for their PC builds! That's awesome! I've also heard from a few other people as well that if they leave a link it gets deleted. I have no idea why!

[@mikeoleksa]

@@ChrisMaherDIY, I have a few uploads of an older PC of mine on my channel you might want to check out. It's got quite a bit of RGB. It was my first lighting PC project. There's some custom cooling, too. I need to upload some new stuff.

[@xXDarthBagginsXx]

I was thinking something like this would look amazing in a case mod - might have to work on something for this as I have a couple cases this would look perfect in.

[@MapleJokerRofl]

Cringe flex kid

[@MrSpleenboy]

Edge lit acrylic would also look awesome on something like a distro plate

[@Ev3rM0r3]

I've been doing the edge lit plexi since the late 90's. However, I did not have access to a new molded aluminum channel to house it so it was also rather tacky looking or made of wood. The advent of formed channel aluminum for this mod makes it well worth buying. Glad someone finally adapted it for acrylic.

[@ChrisMaherDIY]

Yeah the aluminum channel is really what makes this shine. I'm currently trying to make a diy version of it using wood and discovering what you have already known for a while now lol. Its hard to make it look good using wood lol. Thanks for watching!

[@MrTeathyme]

@@ChrisMaherDIY Whats the concern with wood? just an aesthetics thing or is it a reflective properties thing if its the latter couldnt you just use a bezel? instead of using the wood structurally? and if its the former, same deal, structural wood and then cover it with a more aesthetically pleasing bezel

[@reykennedy5716]

Not with LEDs you weren't

[@Xx0AUS0xX]

@@MrTeathyme If I were to guess, I'd imagine it has to do with the size? Aluminum channel maintains a small form factor, and I would imagine that wood would be quuite bulky? Source: none

[@jukefes4497]

Do you know the specs of the edge lit plexi, I want just the panel in order to cut it in different shapes. If you have a recommendationfor a plexi let me know

[@ShopperPlug]

By far the best LED diffuser implementation I have seen so far.

[@ChrisMaherDIY]

Thanks so much for watching and I appreciate the support!!

[@Zanemaynard]

Dude !!! I'm mesmerised ! Your work is amazing ! Very creative !

[@ChrisMaherDIY]

Thanks so much! Its easy to make videos with cool stuff like this. They will look good no matter what i do lol. Thanks for watching buddy!

[@bopedersen89]

Wow!! THANK YOU!! 😁😁 Not only was I going to enquire about your favorite diffuser, was actually going to suggest, time and finances permitting, a kind of "Best To Install" diffuser video less than a week ago.... It's unfortunately STILL on the online Todo list, BUT, at #2 😅 Again, fantastic content my friend! And I huge shout-out to your wife, as I'm perfectly aware of how much support she's gotta put in for this series to output the way it does! 😁 Cheers!!

[@ChrisMaherDIY]

Great timing!! Thanks so much buddy and appreciate it! Thanks for all the support. Lol fortunately my wife has been amazing with how messy the house looks during some of these projects. She's a saint!

[@porterorvetti1294]

impressive! not just the build, but also the fact you reply to basically every comment

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! I still try to respond to every comment! I'm sure I've missed a few here and there but its the least I can do! Thanks buddy and hope you had a great weekend!

[@cheekster777]

These look so 😎 Impressive b-roll footage! 👍🏻 Thank you. 🙏🏻

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment!

[@Kio.O]

These are absolutely beautiful

[@ChrisMaherDIY]

I agree! Thanks so much for watching! My favorite diffuser ever! Just wish they would come back in stock soon!

[@a32singh]

That looks sick!👊🏽👍🏽. Nice work!

[@HighLevelPlayer]

Wow, that's beautiful.

[@Lou.B]

WOW! Super cool! Thank You!

[@ChrisMaherDIY]

Thank you so much for watching and taking the time to comment! I appreciate the support!

[@SSCsled]

New comer to the channel here! Thank you Chris for the tutorials/how to videos, as well as different project ideas. I just renovated my basement and will be taking on a beginner project. Can't wait!!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! You are certainly welcome. I definitely enjoy doing it! That sounds like such a fun project and i'm sure a million different ways you could add some fun lighting to the basement! Let me know how it turns out!

[@cooljaybz]

this one looks elegant chris! would love to put it on walls as accents...

[@ChrisMaherDIY]

Thanks so much! That would look really nice! If I knew these existed a while back, I would have probably tried using them someone on my board and batten accent wall video!

[@jrose7381]

Those diffuser panels are dope as hell. Thanks for sharing

[@ChrisMaherDIY]

You are welcome! Thanks so much for watching!

[@michaelwest6727]

YOU Inspire me. GREAT IDEAS...Thank-You

[@ChrisMaherDIY]

Lol thanks buddy! Thanks for watching and taking the time to comment!

[@michaelwest6727]

@@ChrisMaherDIY anything to help your channel

[@de_stroyed]

How are you getting them to sync? What controller are you using?

[@StevenBamford]

These look awesome! Would you say it reduces the amount of light that's sent into the room, compared with normal defuser strips?

[@noeneonmusic]

Your place must look amazing when Christmas comes around

[@ChrisMaherDIY]

Lol I still want to get into a big led Christmas display outside but that is just a project that's on a whole other level that i'm not ready for. Maybe someday!

[@thomasfeldman3613]

Hey Chris, since these are out of stock/discontinued are there any other panels that you like that are similar?

[@Vantivify]

Did you found anything like that?

[@jaspermelly]

Anything?

[@CypAlot]

Not sure if you just do it because it is quicker, but you can cut off the white heat shrink, and de-solder the existing wiring instead of cutting off and wasting the first and last LED on every strip. Love your content.

[@LightCraftStudio]

Yes! That's what i do, don't cut the whole led off when you can cut the wire, that's just so wasteful. esp if you are soldering them together anyway. also long term the tape is very important on these as its thermal tape. it will help the leds run cooler and thus last longer.

[@ChrisMaherDIY]

Thanks so much for watching! lol yeah that's just me being lazy and trying to save time. I have done exactly what you have described in the past and its not very difficult but having to do it to about 5 strips on both sides did not seem fun!

[@raspberrymintendo2171]

Can't get enough of this content one day I will have time to sit and make some of this stuff!

[@ChrisMaherDIY]

Thanks so much!! Glad you are liking the videos and appreciate you taking the time to comment!

[@BobMuir100]

Quality! Thank you Bob England

[@ChrisMaherDIY]

Thanks so much buddy! Thanks for watching!

[@Par2Pixel]

Had not looked in a while but they are finally IN STOCK

[@rayreyes5405]

I didn't know I needed this. Now I have to have this.

[@Vilow]

That looks sick!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment!

[@TonyPham-Creations]

ohhhhhhhhhh wow very nice find!!! my gears are turning!

[@ChrisMaherDIY]

My gears have been turning too! So many cool things you could make using this! Its a bummer its so expensive but I think the acrylic is the majority of the cost.

[@aaronm359]

I found my staircase project, thank you!

[@ChrisMaherDIY]

You are welcome and thanks so much for watching!!

[@DarylSolis]

This guy is right on the money. Nice work!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment!

[@stringbeanseventeen]

This summer I'm going to finish my game room. I've had ideas in my head that I've only found solutions for on your channel! Thank you!

[@royobrien]

these are beautiful but it looks really expensive to get them in the UK :( great work as always my man

[@ChrisMaherDIY]

Yeah, its tough to find things that are available all across the world. I think Muzata is mainly selling in the US and Canada. Hopefully they will expand and make it more affordable in different countries because they really do have some awesome products!

[@Pro88teC]

Oh wow- This looks so amazing.

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you like them! I just wish they would come back in stock soon!

[@shirtybackup7997]

im doing one of ur older diys with the corner acrylic piece but on the corner of my wall to ceiling. wish i woulda found these before bc that is so much cleaner

[@ChrisMaherDIY]

That's so cool you made it yourself! Lol yeah I wish I would have found these earlier as well! I'm honestly not sure though when they came out. Maybe they just came out recently and would not have even been available at the time. Thanks buddy!

[@HanZie82]

Informative, short and still nice B-roll at the end. This is a great video!

[@ChrisMaherDIY]

Thanks so much! Glad you enjoyed the video and thanks for watching!

[@robbiek9016]

Hello Chris, I would like to begin by expressing my admiration for your fantastic videos. Your projects are so well executed that I could not have done them any better myself. Secondly, I would be thrilled to see a video from you about Hyperion/HyperHDR. And sorry for my bad english, I'm not a native speaker

[@ChrisMaherDIY]

Thanks so much for watching and I appreciate the support! That is for sure on my list of projects I would like to attempt. I've watched a few videos on it already and it looks amazing!!

[@darkfur18]

I think something about half the height of this installed near the ceiling with white adjustable color temperature LEDs would be a great subdued led light strip. Program it to adjust color temp throughout the day

[@ChrisMaherDIY]

That would be awesome and great idea! I'm sure it would not be too hard to do that! Thanks for watching!

[@StolenCry1]

I have the normal sized Muzata channels everywhere in my gaming room and they look flawless, but somehow these steal the show.

[@ChrisMaherDIY]

Have you posted a video of your gaming room?! I love seeing stuff like that! But yeah, these definitely have that extra wow factor!

[@TheMrshawnpaul]

Please productize these and make a plug-and-play product. I’d definitely pay for it!

[@ChrisMaherDIY]

Thanks so much for watching! If I ever give it a try I'll let you know!!

[@macielnascimento1363]

Very Nice... Evertime good ideas and inovate thoughs. God bless u bro

[@ChrisMaherDIY]

Thanks so much for the kind words and taking the time to comment! God bless you as well!

[@lovinglife8988]

It's beautiful, I want that 😊

[@peachpotatochips473]

I bet it look so good in real life

[@ChrisMaherDIY]

It really does!! I just wish they were still in stock! Thanks for watching!

[@corvxnite]

Chris you never miss, incredible to see your growth !

[@ChrisMaherDIY]

Thanks so much!! Appreciate the support buddy!

[@speeddemonsion1505]

I’m wanting to use these but was curious how they look if you put two of the diffusers side by side. Are you able to see a seam in the lighting pattern or does it stay seamless? Have you done this before?

[@ChrisMaherDIY]

That's a great question! I should do a follow up video at some point. They are machine cut with precision so when they are butted up next to each other they are practically seamless unless you get super close to them.

[@speeddemonsion1505]

@@ChrisMaherDIY thank you. I have some coming which I’ll be placing side by side. Hoping it’s not to noticeable. Thanks for posting that video. I’m doing a project and was kind of scratching my head on how to proceed with LED lighting. Those diffusers are just what I was looking for. Ordered them right after I saw your video. 👍🏼

[@p__jay]

@@ChrisMaherDIY and how do you wire them up when going long distance? At some point the LEDs need too much power and you can’t feed them all from one or two ends

[@NickTheHunter]

@@p__jay I think there is a space there for the additional wires that could be used to add power.

[@aadishah8768]

@@p__jay if you go to 0:34 in the video, you can see there are 2 "slots". you use the top slot for the LEDs and run a four conductor 22 gauge ribbon cable in the bottom. im thinking you could use the channel itself as the negative and all four conductors of the ribbon cable as the positive. four 22 awg wires are equivalent to one 16awg wire.

[@Joey.Darkwoods-Studio]

That looks incredible!

[@mpkeller]

Very cool. Thank for sharing. I am going to try to replicate this on my pool edge

[@ChrisMaherDIY]

You are very welcome and thanks for watching and taking the time to comment! That would look super cool!!!

[@HarigeRups]

Cool design, thx for the inspiration!

[@ChrisMaherDIY]

Thanks for watching and taking the time to comment!!

[@jamesbradley582]

Thanks for video, given me an idea to build some shelves like this,my partner won't be happy,she said I am obsessed with leds lol

[@ChrisMaherDIY]

You are very welcome and that's a great idea! Lol there are worse things to be obsessed about lol!

[@Usiraata]

Can you post the video of the shelves

[@BROKENHEARTDESIDUDERJ]

I LOVED you're works your All of WORKS are Best of bestest Big Fan forever BEST wishes for you Always 💗 PEACE ✌️ 🕊️ OUT

[@ChrisMaherDIY]

Thanks again! I appreciate the support my friend!

[@ledlightingaccessories-led5160]

Thanks for your testing. Learn a lot.

[@ChrisMaherDIY]

You are very welcome and thanks for watching!!

[@veronicathecow]

Quick efficient demo. Thank you.

[@ChrisMaherDIY]

You are very welcome and thanks for watching!!

[@foreverunknown369]

This looks amazing

[@marcandamalia]

Thx you very much

[@ChrisMaherDIY]

You are very welcome!! Thanks so much for watching!

[@Brett_is_Veng]

a shame that the products featured are no longer available, would have been nice to try them out

[@ChrisMaherDIY]

Such a bummer! They said they are re-designing them and will be releasing them soon so here is to hoping that actually happens!

[@brooksmiller5597]

Amazing video man - from the topic, to the B-roll shots, to the overall composition of the video. You earned my sub, and this was the first video of yours I've seen 👍 I LOVE when I discover new _(to me)_ , high-quality channels like this one!

[@ChrisMaherDIY]

Thanks so much for watching and the kind words! I appreciate the support and glad you liked the video! Thanks buddy!

[@antonkoenr]

Thanks!

[@faisal.enayat]

That's freakin beautiful

[@rameshpram1444]

Thank you brother nice video

[@ChrisMaherDIY]

You are welcome and thanks for watching!

[@ClarkeSLR]

GUY!!! KZbin recommended your video...SUSCRIBED!!!!

[@ChrisMaherDIY]

Thanks so much!! Glad KZbin is helping me out lol!

[@ClarkeSLR]

@@ChrisMaherDIY Thanks for your work! giving me ideas around the house. Cheers!

[@dennisdean3925]

Chris, those look great! I'm wondering if it is possible to cut the acrylic in an arch shape to 'update' an triple arched antique Brunswick bar to look more Art Deco? Thanks.

[@Sidney-j8f]

This sick 👍🏾

[@-djs]

WOW, what a find, that is an awesome effect, and immediately I am rethinking a part of my lounge, in particular the gap at the bottom of the cupboards, I was planning on just the strips stuck underneath shining down but this would look amazing, I would have to spray the aluminium black to fit in with the cupboards and although it would take away some of the reflecting I still think it would look better. Hope your well 👍🏻

[@ChrisMaherDIY]

I know what your saying! If I saw this product earlies, I more than likely would have tried using it at the bottom of my board and batten accent wall design. Its fun to have options!! Thanks as always buddy and hope you have a great weekend!

[@-djs]

@@ChrisMaherDIY You too Chris, This LED journey, I remember, as I imagine you do about 15 years ago when the very first strips became available, but they weren't the flat SMD sort they were small 3 or 5mm diodes on a 30 cm strip, and quite expensive!, but how far we've come, it makes you wonder what's in store for the future!,

[@HamsterXFiles]

Damn that red one looks like blood flowing thru water, what a cool effect.

[@ChrisMaherDIY]

Yeah that animation I thought turned out super cool looking as well! I think it was the fire animation on WLED if I remember correctly. Thanks for watching!!

[@Par2Pixel]

Amazing just what I was looking for hope they come back in stock on amazon. Thank you for the video

[@ChrisMaherDIY]

Thanks! Yeah I hope they do too. They sold out pretty fast. They must not have had much inventory built up. I'm planning on re-releasing the video once hey are back in stock so hopefully that is soon! Thanks for watching buddy!

[@eclecticlight.design]

I was on that quest too, tired of not finding the best, so I made my own!

[@ChrisMaherDIY]

Lol that's awesome! I love that mentality. Cant find what you want/like so just have to figure out how to make it yourself! How did they turn out?!

[@eclecticlight.design]

Great! I’ve used silicone, epoxy, and acrylic in different lights. Putting 2 strips in a V-channel facing each other, but staggered one LED, makes a smooth blend too.

[@AggresivelyBenign]

Not sure how I ended up on your channel, but that’s really impressive.

[@ChrisMaherDIY]

Thanks so much!!! Appreciate the kind words and thanks so much for watching!

[@Илюминат]

Круто!

[@ChrisMaherDIY]

Thanks so much for watching !

[@Aidan_Stroud]

This gives me… a brilliant idea

[@ChrisMaherDIY]

Thanks so much for watching and awesome!

[@slowmotion2268]

Always the best bro keep going 💪🏼

[@ChrisMaherDIY]

Thanks so much!! Always appreciate the support my friend!

[@slowmotion2268]

@@ChrisMaherDIY ♥️♥️

[@alanpaone]

these look really cool, got the gears turning for an updated version of my beer tap handle, but it'd also be interesting to see how they hold up if the channel and acrylic are cut at an angle

[@ChrisMaherDIY]

I'm wondering the same thing! I have many ideas and some would require them to be cut! My guess is they will cut just fine but I would still be a little nervous to try! lol.

[@mullally08]

Could they be used as baseboard lighting?

[@DigitalyDave]

There's lit. And then there is EDGE LIT!

[@davidalanmedia]

Awesome!

[@ChrisMaherDIY]

Thanks so much!

[@gizlas]

looks like they out of stock everywhere. Congratz :)

[@ChrisMaherDIY]

Thanks so much for watching! Yeah its a major bummer! They sold out really fast and the company has yet to refresh inventory. Althogh they told me they would be back in stock sometime this month (in the US) so we shall see!

[@gizlas]

@@ChrisMaherDIY US only? Too bad.

[@ChrisMaherDIY]

@@gizlas yeah unfortunately :(

[@칼로리낮고맛있는음식]

beautiful🤗🤗

[@ChrisMaherDIY]

Thank you so much for watching and taking the time to comment! I appreciate the support!

[@LerryNoel]

Hello Chris.. AMAZING VIDEO!! i know this was posted some time ago.. Where can i find these panels today? i can't seem to find these ones on Amazon anymore. Thanks

[@charlesjohnston1506]

I admire the high quality of your videos! Just one note, in the video you mention that you get two of the channels per box, but the link you furnished goes to a product with only one diffuser channel. $55 for the one and $99 if you want two. Not a complaint. I know things change rapidly on Amazon.

[@ChrisMaherDIY]

Oh my goodness you are right! Thanks so much for letting me know. I just updated the links. My sincere apologies and thanks again for catching that! Thanks so much for watching and taking the time to comment!

[@oneiros1401]

@@ChrisMaherDIY Those links don't even take me to the product you have in your videos... :(

[@jrbarker7362]

@@oneiros1401 I can't find anything remotely similar. Very unfortunate

[@ChrisMaherDIY]

@@oneiros1401 ohh bummer! My guess is they must not be available in your country. Looks like it's still available in the US. What country are you from?!

[@ChrisMaherDIY]

@@jrbarker7362 that's such a bummer! What country are you from? They are still showing as available. I'm in the the US.

[@hosaleeparrish1194]

I have plans on using the model.

[@RitchieL.E.D.System]

don't worry my baseboard LED will be on the market again soon 😜

[@KinRyuu]

With some slightly slimmer channels, i'd say they would make some fancy door/window trim (or trim for the entire upper section of the wall). For me i'm thinking about covering up a whole wall with them, behind the seats. Great video, keep up the good work.

[@ChrisMaherDIY]

Thanks so much for watching! I was thinking the same thing! So many cool things you could do with these!

[@csimet]

Interesting... they could make excellent under cabinet soft lighting, as traditional strip channels are narrow (~1/2-3/4" wide) and more directional. These could be better.

[@officialeliteinsights]

Hey Chris, love your content. Nicely shot as well. What will be the alternative to WLED to control the LEDs?

[@metroplex29]

i used these with some govee brand strips, it works perfect

[@ChrisMaherDIY]

That's awesome! What Govee led strips did you use? I didn't think they would look very good with this since they are generally only 30/leds per meter but sounds like it worked well for you!

[@ajnako12]

So cool

[@ChrisMaherDIY]

Thanks so much for watching! Glad you liked it!

[@benjaminyoung2403]

I think they would look great on stairs, but imagine making sliding glass door vertical blinds with those.

[@ChrisMaherDIY]

I love your ideas!! That would be so cool making blinds with those! Might have to try at some point!!

[@bryonh2299]

Firstly, love your videos! It's provided me so much inspiration for my own place. I.really hope these come back in stock. I want to make these for all the baseboards in my place, I think it would look awesome! Have you tried taking the aluminum piece to any local shops to see if any could fab it up for you? You already have a copy you just need it reproduced. Hopefully they come back in stock soon, been checking everday! 😅

[@ChrisMaherDIY]

Thanks so much for the comment! Appreciate the support! I have not tried that but its a good idea! I've been trying to make a diy version but re-creating the slim profile of the aluminum with wood/other materials is proving to be pretty difficult lol. Hopefully they come back in stock soon!

[@specialedandrew7331]

Good content sir

[@ivangutowski]

Would look super cook as a kitchen splashback

[@ChrisMaherDIY]

Thanks for watching! Yeah, thats a really good idea! Might have to try that!!

[@bhupendersingh6649]

So beautiful

[@ChrisMaherDIY]

Thanks for watching and taking the time to comment my friend!

[@rarityd]

Thx for a great vid. So you think the govee led strip would fit?

[@ChrisMaherDIY]

Thanks so much for watching and you are very welcome! Some Govee strips would but the Govee M1 does not. Also its not going to look nearly as good with an led strip that doesn't have 100 leds per meter or more.

[@dr.tariqalbarraq]

I really like lights and I was watching some dude in UAE but he is not teaching step by step until I find your videos keep the good work man 💜🙏

[@ChrisMaherDIY]

Thanks so much!! Glad you are liking the videos! Thanks for the support my friend!

[@dr.tariqalbarraq]

Thanks man this is the UAE guy channel make look I want to as him the lights but he is not teaching if you can figure out what he using I will be grateful and sorry for the bothering you The man channel kzbin.info/door/Yk5_iTAzDBUILMkn0g5Lxw

[@jimtNCUSA]

This is going to blowup on yt

[@ChrisMaherDIY]

lol I hope so! Although I think they just sold out :( hopefully they will get some more in stock soon!

[@iamKORHAL]

Hey dude I just found something that you might find interesting to use with LEDs at a pool store. 4ft edge foam that LEDs can pass under. RGB pool noodles too!

[@roygramer275]

awesome product what do you suggest on connection at the inside corners . for the led connections . thanks for all the information . I can't wait to use this at the top of the wall as an indirect lighting project. great channel lots of information compaired to others