2023 Ultimate Gaming Room Makeover - Chill Space Transformation - DIY Video

[@ChrisMaherDIY]

🔥Amazon’s BEST Deals (updated daily): amzn.to/4aaLjCO ☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb Spotless Corner Diffuser Channel 1m Amazon: amzn.to/3DFhRpf Spotless Corner Diffuser Channel 2m Amazon: amzn.to/3Krqw2q LED Strips I Mostly Used Amazon: amzn.to/3W98u8C LED Strips I Mostly Used AliExpress: s.click.aliexpress.com/e/_DdU9Nfl Best Plug and Play LED Strip: amzn.to/3E654vK My Favorite 5v DIY LED Strip: amzn.to/3fXuZho My other Favorite 5v DIY LED Strip: amzn.to/3X8vQMW My Favorite 12V DIY LED Strip: amzn.to/3Ep9QWy ESP8266 Board: amzn.to/3DMYFVT ESP32 Board: amzn.to/3jkvdwM Soldering Iron: amzn.to/3jxx1mB Solder: amzn.to/3r6smMA Solder Smoker Absorber: amzn.to/3rbHCYp Helping Hands: amzn.to/3v19YG3 Colored Silicone Wires: amzn.to/3Keoel3 Black and Red Silicone Wires: amzn.to/3DTFARN Wire Stripper: amzn.to/3x9RGF0 Heat Shrink Tubing: amzn.to/3733zSH Sunmory Floor Lamp: amzn.to/3tR8e36 Acrylic: amzn.to/3zyiUCL ============================= Support My Channel Directly: Become a monthly contributor on Patreon: www.patreon.com/ChrisMaherDIY Buy me a Coffee: paypal.me/ChrisMaherDIY ============================== My How To Solder Video: kzbin.info/www/bejne/l6G2q2aEjb6frpo Install WLED on ESP32: kzbin.info/www/bejne/ioCon3mBgdJsidk Install WLED on ESP8266: kzbin.info/www/bejne/ommyfpxtiLKjp9U TimeStamps: 00:00 - Introduction 00:26 - Project 1 - LED Pegboard 13:21 - Project 2 - LED Corner Pex 22:16 - Project 3 - LED Baseboard 32:54 - Project 4 - LED Corner Acrylic 40:03 - Project 5 - LED Lamp Hack 51:35 - Project 6 - LED Paper Individual videos from the above projects with more detailed materials breakdown in their descriptions: Project 1 - LED Pegboard: kzbin.info/www/bejne/hH-klZWpfrObY9k Project 2 - LED Corner Pex: kzbin.info/www/bejne/qHrFha2LeZd4as0 Project 3 - LED Baseboard: kzbin.info/www/bejne/f5ybeaF9rcuEp5I Project 4 - LED Corner Acrylic: kzbin.info/www/bejne/kHOYeaSNnbKLhNE Project 5 - LED Lamp Hack: kzbin.info/www/bejne/i3-zg5Jvbd1_h7s Project 6 - LED Paper: kzbin.info/www/bejne/pGqvpJyHdrd5l9U The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support! In this video I use a few songs from my favorite Synthwave artist Kalax. Please be sure to check out his KZbin page and support him in any way you can! Kalax - Out of Time (feat. Pyxis, Jay Diggs) [Official Music Video] kzbin.info/www/bejne/m56UcqVuntZmmpo Link to his website: www.iamkalax.com/?fbclid=IwAR... Link to his KZbin channel: kzbin.info Song: Beau Walker - Horizon Music provided by Vlog No Copyright Music. Creative Commons - Attribution-ShareAlike 3.0 Unported Video Link: kzbin.info/www/bejne/d57bnnmZgtSCq5o

[@Kinetica_tm]

Your deserve an Oscar or a Nobel Price my friend. You just saved me tons of money and made me enjoy building up my gaming room. Thank you so much for your content

[@ChrisMaherDIY]

Thanks buddy! Glad you liked the video and thanks so much for watching!

[@rain028]

nobel price 😭😭💀

[@kaizentiger66]

Bro really said Oscar or Nobel Price 💀😂

[@robertsoulier4736]

You hang out at Home Depot bouncing from isle to isle looking for inspirational pieces for your madness to? I thought I was the only one.

[@ChrisMaherDIY]

Lol well there are at least two of us! Thanks for watching buddy!

[@scottwpomfret]

I do that too... People think I'm lost or something. They just don't get it lol...

[@lotheeus]

I'm glad that this video got recommended to me. This is brilliant, mate.

[@ChrisMaherDIY]

Thanks so much! Glad you enjoyed it! Thanks for watching buddy!

[@jeffreyabbey9592]

Same here I just bought 6 pieces for my home. Thanks again

[@muhammadghazali1707]

if it helps to get you a one up in you tube awards, i will vote for you, you've not only educate, but open my mind to alternative and cost saving lighting methods, thanks for sharing, god bless

[@Zhoulifer]

I didnt know we could use paper on LED project and came out an amazing result! MY BRAIN IN EXPLODED!

[@katieblackmore2004]

The world has gone LED mad! And i'm part of it lol. Same kinda vibe i am jamming with my game room, so chilled. Nice video.

[@ChrisMaherDIY]

Thanks so much for watching! Its for sure a fun hobby to get into!! Glad i'm not the only one who enjoys it!!

[@dadsquatch79]

That's been a HUGE transformation. I don't think I ever saw the original room.... bad ass job man!

[@ChrisMaherDIY]

Thanks buddy!! Yeah its fun to see the before and after. Amazing what some paint and some lights can do!

[@Merrlin]

This is elite... I have no words man, you did an absolutely amazing job! thank you for being very thorough, im hoping to recreaete some of this for my own place some day

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! I'm glad you liked the video!

[@RobertWardII-mk3ll]

This is badass bro!!!! Looks amazing!!!! Awesome job!!!!

[@berkc06]

Amazing makeover Chris. I love your projects so much, you are so creative. I wish these products were cheap in my country so i can makeover my room too. Keep it up!

[@ChrisMaherDIY]

Thanks so much! Always fun to see what a little light and some paint can do to a room!

[@MountainDuwu]

You can do these kind of makeovers, even if the usual products are expensive, there should always be an alternative that, with a little effort, can do the same thing. Also try not to set your expectations too high, even if it’s half as good as this, that is still a really good setup.

[@ardakose4393]

Ah be…

[@espi7895]

Some J B welding should work for your magnet idea... bad ass man cave!!

[@ChrisMaherDIY]

Thanks for watching and appreciate the tip! I'll for sure have to check that product out! Thanks buddy!

[@weaselsworld]

The OCD in me is wishing you would move those LED bars up one row, so the number of open rows between the lights and the upper and lower frame is equal. :D

[@rayncadiana]

For the pegboard led installation it would be easier and better to only loop the data wire from first to last and feed the power parallel down so that every strip is directly connected to the "3 port wago" at the beginning. this way the voltage wont drop along the way and make the brightness/colors fade.

[@Attiqharoon]

Good idea 💡 Only data needs to travel in the direction or the arrow. 👍🏽

[@ChrisMaherDIY]

Thats a really great idea! Thanks for sharing. I never even though of that but it would also mean I wouldn't have to do as much soldering. Love it and thanks for the great tip!

[@ChrisMaherDIY]

That's right! I totally forgot to mention that in the video! Thanks for the reminder!

[@user_i.d]

Definitely one of the best comments so far, people that are not electrician don't think about voltage drop in there projects

[@VioletGiraffe]

Thank you, Chris. So many amazing ideas and tricks to make my boring room much more interesting.

[@ChrisMaherDIY]

You are very welcome and thanks so much for watching!! Glad you liked the video!

[@yoseflugashi9820]

Really cool seeing everything together like that, and compared to the old basement it's night and day. Very cool space

[@ChrisMaherDIY]

Thanks as always! Yeah not really a new video but wanted to put all the projects together in one spot to make it easy to see the trandormation!

[@matthewolde585]

This looks great! I'll be having a crack in the lounge and office.

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video!!

[@taylorm417]

Man, can’t wait to try alllll this out. This is so next level

[@ChrisMaherDIY]

Thanks so much for watching! Glad you liked the video!

[@REALLYRANDOMREVIEW5]

I was just going through some of Your RGB projects for some ideas around my House and i love the Corner plex piece you created im thinking of doing something on the Hallway / Stairs but dont want to over do it but i'm defo going to try a corner plex though Thanks Chris as always !

[@PeterPannekoek1850]

Lel you took DIY Crafting to the next level! Thats creativity at its finest!

[@youngporky5788]

I am always mesmerized and inspired from your RGB-fication of surroundings 😎

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! I appreciate the kind words buddy!

[@TheCaffeinatedOrganist]

Speechless. Thank you.

[@HiPickle]

Wow just wow....

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video!!

[@MMike310]

Great video!!!! Glad i stumbled onto this content. Relatable and brilliant minded!

[@ReelSpider]

Mar the smooth metal surfaces with 220 grit sandpaper before you superglue. The scratches and grooves created give the superglue something to grab onto, increasing the lateral stress failure point. This trick helps with most glues or epoxy.

[@ReelSpider]

DON"T SAND YOUR PEX! Use acetone to wipe that print right off, no effort, no scratched up tube!

[@ChrisMaherDIY]

Thanks so much for watching and for the advice! I'll for sure remember this!

[@ChrisMaherDIY]

Thanks again!! Sounds much easier than sanding!

[@SeanMather]

These are some great ideas. One thought though would have been for the lamp is to use a smart bulb and an optional smart button, and then just pull the chain, leave it on, and tuck it away. Set the button to control the bulb, and then mount the button on the lamp. Much less soldering required.

[@ChrisMaherDIY]

Thanks so much for watching and glad you liked the projects! That's a really good idea! Anytime there is an option for less soldering, I'm a fan lol. I don't mind soldering and its easier than I initially thought but its still somewhat time consuming! Thanks for sharing the great idea!

[@Raptor-Jesus]

Would the smart bulb have the multi layer color thats shown in the clip? or the flame flicker effect? That might make the led strip option better.

[@toddcasteel8446]

you gave me some great ideal thanks for the work you post

[@ChrisMaherDIY]

Thanks again buddy! Glad you liked the video!!

[@rpagala]

I love the transformation. The place looks amazing!

[@ChrisMaherDIY]

Thanks as always! Fun to see what some lights and a little paint can do to a room!

[@Position_Keys]

NICE

[@ChrisMaherDIY]

Thank you so much for watching and taking the time to comment! I appreciate the support!

[@mrbritix1859]

Congratulations, excellent video very good explanation, thanks.....Portugal

[@ChrisMaherDIY]

Thanks so much for watching! Glad you liked the video and thanks for taking the time to comment!

[@TerryFromChickenCoop]

What couch do you have? I’m in love with it

[@making-in-action]

Freakin love the videos my man! Keep cranking bro!

[@ChrisMaherDIY]

Thank you so much for watching and taking the time to comment! I appreciate the support buddy! Hope you have a great weekend!

[@iddqd7162]

streets of rage background is always good

[@0rapter]

the purpose to putting the wires in separate holes on the wago is that it looks neater

[@ChrisMaherDIY]

Thanks for the reply! That does make sense! In my mind I was like there is no reason why 2 wires twisted together in one slot would not work but i didn't know for sure if there was a major reason why it shouldn't be done!

[@rafaelandresrubianolozano4991]

Great work dude!

[@josephlintner3967]

These are all very impressive, thank you for taking the time to make these videos

[@ChrisMaherDIY]

Thank you so much for watching and thanks for taking the time to comment! You are very welcome and glad you like them!

[@bryanlumley3077]

Nice job on the room!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the setup!

[@besho7891]

Wow so stars my friend amazing

[@ChrisMaherDIY]

Thanks so much!

[@mlk4life]

very cool room.

[@ChrisMaherDIY]

Thanks so much for watching and glad you liked the videos! Appreciate the support!

[@jositeveo3838]

look's great very creative

[@ChrisMaherDIY]

Thanks so much!

[@jonspringhorn5224]

Bro your ideas are pretty friggin sweet. Thanks for the great step by step walkthroughs and all the inspiration!!

[@ValeraIsYaMan]

Quality of content is outstanding!

[@robin.vision]

Yooo Great mann, You inspired me to buy WS2812B Led for my desk setup, Thanks for all your tutorials, every project is innovative and well explained. Thankyou soo much.

[@ChrisMaherDIY]

You are very welcome and thanks so much for your support! Glad you enjoy the videos!

[@JoseRodriguezFrio]

Same

[@bopedersen89]

NGL... kinda miss them BOSS plaid couches ... hahahah!! JK! Brother, I just love your vid's! IDK if I've ever mentioned to you in previous chats, but somehow, you videos ALWAYS seem for fill an info gap i have in a about to launch project, or planning for a future project - its literally getting close to the neighborhood of half of ur how-to's (except the wiring/solder ones, been soldering and doing reflow work for many many moons as my side hustle has been cell & tablet repair, as well as the originator of my side hustle career - all manner of laptop and pc repair for a decade or ... 3? lol). What you have done to your media room, i am doing to my living room, and now combined media room as well😁 So, again, a big thank you for all of your efforts and tinkering for the case, and an even BIGGER shoutout to the significant other, to which none of this would have been possible without their blessing and support! Cheers!!

[@ChrisMaherDIY]

Lol sometimes I do miss them as well! Thanks so much for the kind words! Appreciate the support buddy!

[@besho7891]

I love your works my friend

[@ChrisMaherDIY]

Thanks so much buddy!! Thanks for taking the time to comment!

[@besho7891]

@@ChrisMaherDIY okay you're welcome my friend

[@AdrianaBarron1]

Sensational content as usual! Great tutorials, very easy to follow and very creative! Can't wait to see more :D

[@ChrisMaherDIY]

Thanks so much! Appreciate the support and thanks so much for taking the time to comment.

[@AdrianaBarron1]

@@ChrisMaherDIY no probs!

[@ayrtonfineout442]

One of my favorite RGB channels. Keep it up dude.

[@ChrisMaherDIY]

Thanks so much buddy! Appreciate the support!!

[@sevenzero1139]

The best video i ever seen ❤️

[@ChrisMaherDIY]

Thanks so much for watching and the kind words! I'm glad you liked the video budd!

[@mpsadre132]

Great again 👍 Love your work.

[@ChrisMaherDIY]

Thanks as always!

[@DMlloyd01]

This is awesome!!! You just gained another subscriber!!!

[@ChrisMaherDIY]

thanks so much for watching! Glad you enjoyed the video!

[@DMlloyd01]

@@ChrisMaherDIY Thank you sir! I am so excited to put the corner led lamps together. The number of subscribers you have is criminal. I may not have a ton of followers on Instagram but I will be sure to shout you out once I post final results. Please keep creating!!!

[@dosster2001]

for the pegboard are all the lightstrips facing the same way

[@rex8200]

Great channel. Love your imagination. I’m always looking for new ideas to integrate WLED into my lighting projects. Side note. It is not pronounced “X specially”. It’s pronounced Eh specially. (especially). Cheers

[@marthar1816]

You might try JBWeld for adhering like shiny metals together. i've even used it to weld metal to mirror/glass.

[@ChrisMaherDIY]

Thanks so much! I think a few others have mentioned that product so It must be good! I'll have to give it a try!

[@thearctican1]

I'm shocked that people don't know about this. It is THE adhesive/epoxy for metal on metal joining without welding.

[@ishlight3772]

CRAZY creative ideas bro. Might take some lmao

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video and ideas!

[@chefbennyj]

The Sunmory lamps have doubled in price. I bet it was because they started sell a bunch of them to people who watched your videos 😆 that is actually pretty cool. 😎

[@ChrisMaherDIY]

Thanks for watching as always! What country are you in? I just clicked on the link and they are still the same price here in the US at least. Around 70 to 80 dollars depending on the color.

[@chefbennyj]

@@ChrisMaherDIY Canada, our dollar is worth less, so that would make sense.

[@marlitobigmtv7288]

VERY CREATIVE THANK YOU

[@jamieeharrison]

This is awesome. Quite relaxing to watch as well 😌

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video!

[@boocoo28]

Chris I love the transformation and I always look forward to your next videos. Place looks pretty sweet!

[@ThePerfectionist1]

So sick bro❤

[@Rxmedic43]

You could have just used a nut and bolt to hold the channel brackets on. Add a washer to the backside and it wound pull through over time if they are heavy.

[@ChrisMaherDIY]

Thanks for watching and taking the time to comment! That's a great idea! Always love to hear from others on this. Thanks!

[@invisiblehatednotwantedforever]

Brilliant, beautiful, great video, brother👏🏽👏🏽👏🏽👌🏽🤟🏽🙏🏽..very useful, helpful and wonderfully done. After being devastated and used by a horrible female.. three times differently back to back and losing my 4 month old son and my mother.. ..Im trying to put whats left of my mind and heart into something other than gaming.. redoing my bedroom and living room modern and with the govee lighting and same ideas and concepts.. ..god bless, thanks for the work and video 🙏🏽

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment. I'm so sorry for what you have been through. I'm glad you are enjoying the videos and that they are giving you some ideas! Its a fun hobby for sure! God bless you as well! Thanks again buddy!

[@micahmatyi131]

Awesome job. Yeah I’m sure you’ve already been told by now but I’m my experience epoxy is the most difficult to apply but gives best results to attach anything permanently.

[@ChrisMaherDIY]

Thanks so much for watching and for taking the time to comment! A few others have mentioned that so It must be the best! Appreciate the info buddy!

[@CelestialRecordsLabel]

man ur great but if i have to do this i have to buy all the equiment to do it aswell haha thats gonna cost me alote aswell

[@Machinegunrunner]

With the lamp you could also buy a RGB Wifi controlled bulb

[@dmanthakid]

Does both board you listed have the chase feature and what did you use for a power source you didn’t list it

[@StuBoyUK]

This is really 😎

[@E2STOPTV]

You done great! Keep up :)

[@ChrisMaherDIY]

Thanks so much!

[@jarppa1390]

I ques you could solder the magnets to those metal thingies instead of using superglue

[@raghuramsundar]

my friend, you dont have to use neither a magnet nor a screw to fasten the Al strips.. just take a telephone/RX cable wires or even the plastic tie to hold the light strip.

[@Emily-lm9pc]

Very cool change, and thank you for all the explanations! I've had good luck with epoxy and metal in the past, but I wonder if you could just... tie the clips to the board? I imagine some ribbon or something might actually do the trick, but I might be oversimplifying it!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! You know I never thought of that but you probably could use something to tie them down! Love to always hear other ideas on how things could be done. Thanks for the great suggestion!

[@TheRoadTaken]

For the metal, use jb weld.

[@calistin1]

Wow love the corner led lighting! I am currently redoing my apartment living room and there's no ceiling lights etc so I have to use lamp and what ever I come up with and this video has some nice ideas. I particularly like lights 2 and 4 going up the corners!

[@ChrisMaherDIY]

Thanks so much buddy! Yeah its a fun little hobby and not too time consuming! Once you start though, its hard to stop lol!

[@user-wi9fu3fc2l]

Nice..

[@ChrisMaherDIY]

Thanks again!

[@odin777ff8]

Bro what are the tubes you used for corner pex

[@jamesbarlett246]

The LED lamp hack looks great but how would the lighting be if you just used a Govee RGB bulb instead?

[@mianzubair2899]

Hey, found this video today. such a good piece of work. I was looking for a guide to start and found this one. I just want to ask how many esp's do you have in your room and how they synced together? Secondly from where you get the code for these esp's. It will be helpful if you can answer.

[@deandre131remz]

to secure the peg board quicker and easier, what about 3m strips? you put screws anyway so it would still be secure?

[@ChrisMaherDIY]

Thanks for watching! That's a really good idea. I think that would work just fine. Thanks for the great suggestion!

[@terryxperry]

Maybe try useing apoxy rison in as a difuser.

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! I really do want to try that at some point! Thanks for the great idea!

[@MrNenemba]

beautyfull

[@ChrisMaherDIY]

Thanks so much for watching!

[@lo-fieyecandy214]

Hey how are you displaying the images on your TV. I'd love that while Im listening to music. Also what are you using for a visualizer for music

[@LIQUIDCIRCUIT7788]

spot weld magnets ? or jb dots

[@ChrisMaherDIY]

Thanks again for the advice! I appreciate it!

[@Karebear42069]

For those floor lamps, you could've just used 2 RGB Philips Hue bulbs or similar. Would've been easier.

[@channingrhodes6756]

Great job, just wondering, could u just use an RGB light bulb instead of the strip and hard wiring it? Maybe much easier. But great job!

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! You for sure could use a light bulb and it would definitely be easier! The only thing you would lose is that gradient type effect that you get with strips since light bulbs (as far as i'm aware of) are still only to just display one color at a time.

[@TechNess]

It s Beautifull bro 😍😍

[@ChrisMaherDIY]

Thanks so much bro! Appreciate the support!

[@4kpoison784]

Man the 6th one was awesome because the govee versions are expensive

[@fabes326]

Is there a reason why you connected the white wire to the ground on the LED strip ?

[@ChrisMaherDIY]

Thanks so much for watching! The ground from the esp device does need to share a common ground with the led strip for it to work.

[@speed4213]

Question for anyone. I have pc boxes monitor , headset , mouse etc boxes where do y’all put all of them ?

[@goofman330]

hi community! im an 12 year old from germany. is there any alternatives of the spottles diffuser because in german amazon 10 2 meter diffuser cost around 500 till 600 bucks.

[@raulgbcr]

Hello! How do you make the LEDs on the room sync with the contents on the TV? Regards!!

[@ChrisMaherDIY]

Thanks so much for watching and great question! I wish there was a way to do it automatically (maybe there is but its beyond my knowledge) But all the lights in the room are connected to an esp device and controlled using WLED. I can sync all devices together so when I change one, it changes them all. Thats what I was doing here!

[@babusreekanth6480]

@@ChrisMaherDIY I've seen couple of videos about ambient lighting in this channel. kzbin.info/www/bejne/gGOZoIyigN6kbbM I haven't tried it, and not sure it can combine with wled, but wanted to say thank you for sharing your knowledge.

[@ChrisMaherDIY]

@@babusreekanth6480 thanks buddy! I have seen that and at some point I would love to try that method!! It looks awesome!

[@Beni-zl4bf]

crazy

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Glad you liked the video!

[@Beni-zl4bf]

@@ChrisMaherDIY u gave me and my dad some new ideas cause we love to build stuff like that on our own, watched the whole 60min. Ty

[@ChrisMaherDIY]

@@Beni-zl4bf Man that is a commitment to watch the entire thing! lol but thank you! It is a fun little hobby!

[@knight1987]

What about the sofa can you share what it is?

[@Iinustechtips]

Hey! I was wondering if you had any reccomendations for strips (I need about 65 feet) that have dedicated white leds?

[@ChrisMaherDIY]

Thanks so much for watching and great question! I have used these before and they are amazing! amzn.to/3AuAs69 Here is the project that I did using these: kzbin.info/www/bejne/mGKWh3-fgJx0hbc

[@dawnpet13]

Where did you get that couch? It looks super comfortable

[@ChrisMaherDIY]

Thanks so much for watching! Its called a daybed with trundle. Super comfy! I cant remember exactly where we got this but here is one that is similar: amzn.to/3E2dhBS

[@robertc3608]

Love your videos. In this video what are you using for the screen? Is that a TV? Or a projector screen and projector? And do you have links to those products?

[@ChrisMaherDIY]

Thanks so much for watching and glad you are liking the videos! Its an old projector with a basic 100" white screen pull down. Here is the link to the projector: amzn.to/3FMu1yD The projector worked out great but just recently trying out new 4k UST projectors and wow what a difference. But its one of those things that you dont realize your missing when you dont have it lol.

[@nathanp6795]

What is the name of the day bed that’s in there? It’s the only thing I couldn’t find on the list. Thanks!

[@toddcasteel8446]

try JB weld to hold the

[@ChrisMaherDIY]

Thanks for the recommendation! A few others have also said JB weld so it must be legit!

[@da6ixbarber]

Hey brother what's the module that you use to do the lights like that like how do you get them to control each other

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Pretty much all my lights I'm using WLED installed on an esp32 to control. Here is a video I did of the program: kzbin.info/www/bejne/epC4g4h8f9t_hdE and then here is a video I did of showing you how to install: kzbin.info/www/bejne/ioCon3mBgdJsidk

[@CyberDuece]

I know I am late to the party, but how much would you charge to build one and post to NC/

[@ChrisMaherDIY]

Thanks so much for watching and taking the time to comment! Right now this is just a fun hobby that I do when I have time as I have a regular day job! If that every changes and I'm able to do this full time I'll let you know!

[@nabilajaved3476]

Can u plz tell me where did u got this couch from, it looks super comfy

[@ChrisMaherDIY]

Lol it is the best! Its called a daybed with trundle. I'm not exactly sure where we got this one (it was a while ago) but here is something that is similar! amzn.to/3hmD3su

[@rosendoislas7915]

What table saw where you using?

[@ChrisMaherDIY]

Thanks so much for watching! This is the one I used: amzn.to/3qCLVsX