Condor Pit Stop Wheel Chock PS 1500 Installation TK-3000

Adapter Kit: www.condor-lift.com/condor-pr...
Wheel Chock: www.condor-lift.com/condor-pr...

[@roadglide]

They have the Light Show, they have the Bike Show. Now they’ll be having the Enclosed Custom Trailer Show. This trailer is well on it’s way to be’n a Show Stoppa! Your Boy Chris do’n what he do! Raising the DIY bar once again! with an MC Hammer would defeintely say... “You can’t Touch This!” Because it’s simply too mucho Caliente!

[@chriscaliente5033]

Road Glide thanks for the compliments, but I really have no plans to make a show trailer out of it; just another tool to transport my things a little bit easier.

[@campupnort1905]

Thx for the video, Chris:)

[@kevincchurch2364]

Thanks for the video !

[@josephsanders3027]

Hey Mr. Calienate, thanks for all the advice and how to vids. I am new to the Goldwing family and I am honored to have you as my tour guide in this new world of goldwing riders.

[@chriscaliente5033]

Thanks Joseph for watching and enjoying my videos, I'm honored to entertain the Goldwing community with tips and ideas.

[@alanrobison2657]

Great job Chris, the paint job on your trailer is amazing!!

[@SmokinLoon5150]

Nice review. You helped my decide on the Condor. Thanks for sharing!

[@jefflink4671]

Have 1 in my 12’ cargo trailer as well, its the earlier metal version with 4 thumbs screws to 2 metal straps mounted to the deck. Yours is definitely a nice upgrade with just 1 thumb screw. I do not trailer often but it has come in handy at times.

[@hi-techredneck5293]

Nice system!!! I'm going to look into that for mine!!! Thanks Chris!!!

[@Andricity]

Just got one last week, works great

[@cwqrpportable]

Great video Chris.........well done. I'm looking at buying these products and this video helped very much. Btw, your trailer is to die for. Thanks!

[@rdalev1]

Have the same wheel chock for my Triumph Trophy and it's a nice set up, other than getting the bike out of chock, a problem you probably don't have with a reverse gear. It takes everything I've got to pull bike out but, at least I know my bike is secure when in the chock. Good video!

[@darrylyancey6753]

Chris, what’s happening, great demonstration, I just purchase the wheel chock also. Now I need the trailer.lol✌🏿

[@kenjacob5046]

What size trailer is that?

[@dpcouchjr]

Great job and Great video

[@deweyshaw7246]

Chris - What is the spacing between the mounting holes on the TK-3000 mounting plate? My trailer has a 6" wide steel plate welded in the floor for wheel chocks and it'd be great if both bolt holes go through the plate.

[@goferizer]

Chris, thanks for video. Have you tried the next pin setting up from the first one? I ask because optimal for 130/70/18 front is second pin hole per instructions. Just curious because I installed mine today but have not used it yet just trying to save a step! (2004 'Wing) Thanks

[@MarkSmith-sh5xq]

Hi ChrisThe cradle that tilts should be turned around ,it says that in the instructions ,if you look at the two ends, they are different.

[@terryfulmer6967]

chris what is the height of the adapter. looking to put this in a toyhauler and want to know if a rug will cover it or the adapter would be high and we would stumble over it

[@av8dr]

Nice. Thanks.

[@tomw5vlt119]

Great video and coverage of mount and accessory, perfect, thank you. Looks like a beautiful trailer... what is it?

[@jefftilghman9059]

What is the song and group you used in your Wingding 40 "Wingasm" video?

[@chriscaliente5033]

Jeff Tilghman the artist name is Tucka, not sure what the song is called.

[@colingroskopf1063]

I want to use my trailer for snowmobiles as well. Can you drive over the permanent adapter with a snowmachine without damaging it?

[@tomw5vlt119]

Doesn’t show the connection bolts between pit stop mount and optional adaptor. The adaptor sits a bit below the mount’s cross bar... especially when the mount is resting atop the horizontal front base support bar... so basically the only part I have concerns about - not shown in video

[@dellparker7686]

Any way for a short person to get the bike out of the wheel chock without a strain?

[@chriscaliente5033]

To get the bike out the wheel chock, use the Reverse button on the Goldwing.

[@AdventureswithRedbeard]

Great install video. Have you thought of getting some of these companies to sponsor you?

[@chriscaliente5033]

I need a good manager.

[@noiwright2686]

Chris Caliente what size holes & bolts are needed to secure to trailer?

[@fredjohnson688]

Cool

[@darrylgerow4040]

Now that you have had that epoxy floor for 2 years, how is the epoxy holding up? I have read that over time the wood expansion and contraction will crack the epoxy because it does not flex. Thank you.

[@chriscaliente5033]

I love my floor Expoxy It’s holding perfectly, zero issues. kzbin.info/www/bejne/nXPYnXahe7-gpK8si=Lcl-l6iSL2qwUVZi

[@thomasandrewphd.5844]

Nice trailer ! I will do one for my bike also. what size is your trailer?

[@Jjason601]

Gold wings are made to ride cross country😂😂😂

[@chriscaliente5033]

That's very true, but there comes a time when motorcycle owners needs to trailer their bikes for various reasons or helping a friend, I had two long distance trips cancelled in the last 30 days for bad weather, one of them was because of Hurricane Michael. The way I see it having an enclosed trailer doesn't make you less of a man, it makes you more a versatile motorcycle owner with no restrictions, besides I have nothing else to prove everyone knows that Caliente rides hardcore year around.

[@Jjason601]

Chris Caliente haha I’ll put my street bike it in a minute.

[@g41thomas]

$300 vs $60 they both do the same greatly! m.harborfreight.com/1800-lb-capacity-motorcycle-standwheel-chock-61670.html