How To Replace a Ford Fuel Filter (homemade disconnect tool)

[@spicey4522]

I just wanna say how thankful I am to have a channel like yours to help me do my own maintenance. I was quoted 450$ for a motor mount swap, bought the part for 38$ and had it done in less than an hour by myself because of your video.

[@chrisfix]

Awesome! I'm glad the videos are helpful!

[@Kfam22]

@@chrisfix estoppel e,lkkkk

[@daynamcguire4995]

I have watched several videos and this one had the best camera angle and explanation… I’ve only replaced fuel filters on 1970s vehicles where they had the rubber hose and clamp so this tool explanation and visual was wonderful

[@briteidea08]

Just did this today on my 2011 Ranger. I even bought the same fancy disconnect tool. Turned out I didn't need it. Everything is just a push type disconnect. Keep up the video's.

[@claudioregalado1909]

Christ I have a 1999 volvo S80 2.9 cranck but don't star but if I disconnect the negative cable an reconected the car star can you help me please what is the problem I'm from dallas tx tankyou christ

[@silvermaple7779]

Chris, you have the absolute best automotive channel on youtube...hands down. Nothing else even comes close. Thanks again for all that you share.

[@CT_Taylor]

+Silver Maple Idk, scotty kilmer makes me feel warm on the inside.

[@JourneyToTheTruthandTR]

Taylor F. Yea, Chris makes good vids but Kilmer's tips have saved me thousands of dollars while chris's has saved me hundreds. But keep in mind Kilmer has been doing it for 40 years and the guy never seems bummed out. Any how, both channels are awesome. They should both team up every once and a while. Chris can hold the camera and do the video editing while Kilmer fixes everything...lol Ohhh, or better yet do a mechanics jeopardy challenge.

[@1337pcftw]

@@CT_Taylor He used to annoy me but I look forward to seeing his videos

[@shanefrank3281]

Great video. From replacing the fuel pump yesterday on mine I found a new way to get off those lines. Those two small lines you used the tool on can be removed by just pushing in on the hose (toward the filter), then while doing that push in on the orange clips with your finger, then just pull the hose off. No tool needed! Seen several of your videos, always quality stuff.

[@lonniebanark4917]

😢2oo4 monte🎉 Caro filter o-rings, leak, probably not needed,

[@drink15]

Steps were not clear. How do I put the transmission back together?

[@xXCookieXx666]

+drink15 Mistook pen for penis and got my dick stuck in the fuel line...

[@chrisfix]

+drink15 LOL, dont ask me, transmissions are one thing I dont mess with haha

[@sniperlif3]

You forgot to jack your car back up. You may need to remove the front blinkers and since you are doing that you might as well change the blinker fluid as well. No one likes a blinker that does not work.

[@riScorpian]

+Justis Cady See, the joke here is actually on all of us. Because I'll bet it wasn't stuck; there was plenty of room.

[@_Chaoticollie_]

drink15 You don't. Just drive without a transmission, I'm sure you'll be fine. * cough cough*

[@rcrcdell8458]

Just changed my fuel filter on my 05 ranger edge. My fuel removal tool will remove 2 of the 3 lines. I remember watching the pen cap trick...worked perfectly. Thanks chrisfix...the cap is now a part of my toolbox.

[@rony3500]

Hey Chris, can you do a list of must-have tools for repairing cars? Breaker bars, torque wrenches, etc.. You're the best, thanks!

[@chrisfix]

+Sir Bacon That is a great idea. This is my top 5 favorite: kzbin.info/www/bejne/kKKtepSOjbF0rNU

[@XxS1l3nTxa1Mx]

I'm just here to hear worter.

[@chrisfix]

+XxS1l3nTxa1Mx hahaha

[@MrTmenzo]

lol

[@jrm956]

Dude why does he say it like that do Canadians say woter

[@samsautoanddiy]

Then go to the Wooder Pump Video lol

[@callingtwch]

Chris, thanks to your videos, I changed my brake fluid and my fuel filter out today. Thanks for the great videos.

[@jringo1808]

I like your video style. Quick and to the point. No stammering and unnecessary dialogue.

[@chrisfix]

+J Ringo Thanks!

[@sonofcarr]

This man just showed me how to change my fuel filter with a pen.... you the GOAT bro.

[@wgp2000]

Your Channel is amazing. I have an 08 Ranger. It is great that almost every video of your truck you do, is so compatible to mine. Doing my Fuel Filter this weekend. Watched your belt episode, I did that yesterday. Watched your Idler Pulley episode, I changed that Yesterday. No more squeaks. Your Channel makes my truck run like a champ.

[@onagoodday-jbangbangbang9486]

How easy was the filter change for you? Did you use the disconnect tool?

[@Scott-NCC1701]

Replaced my fuel filter today on my 2000 Ranger. Excellent instruction. Many Thanks to Chris!

[@michiganborn8303]

I wish this video and KZbin was around in 2003. It would have saved me a lot of aggravation on a 1998 Ford Ranger XLT 3.0L.

[@tacomsal]

Great video. I changed the fuel filter on my 99 Ranger yesterday. The only problem I had was that the auto parts store gave me the wrong filter. When I thought I had it installed correctly and tried to start the truck, I had gas pouring out all over my driveway. Several attempts later I notice that the filter line was slightly smaller that the old one that I had removed. Once I got the correct filter it literally took less than a minute to install. thanks for the video. Keep making these videos.

[@dewrus2153]

Nice video as usual, Chris! One tip I have found that seems to help with stubborn fittings of this style is to give them a good shot of Kroil or WD-40 before removal. I try to kind of blast out any dirt or grime in the fitting and they seem to come off a little easier...especially the one with the plastic clip. Thanks again!

[@chrisfix]

+Dewy Russler Thanks for the tip! A penetrating fluid would definitely help if yours are stuck!

[@BradKesalowski]

@rTZink124 if your replacing the filter, it dosent matter you’re replacing it anyway

[@mikea-strong5020]

Chris, love your videos brother. Just want to mention that I have an '02 Ranger and with those orange and green clips, you dont even need a tool, you just have to push down on the orange or green part while pulling on the fuel line at the same time. It is quite simple but took me a while to figure out! Keep up the good work man.

[@chrisfix]

+Mike A-strong Thanks a lot for the tip Mike! I wanted to show how to use the tool because not everyone is as fortunate to have the clips to push on!

[@Nexfero]

Just replaced my fuel filter on my ford ranger at 130,000 miles thanks to this video, one the of the plastic u clamps was broken 2:34 (just stuck a hose clamp on it) and I used the pen cap trick.

[@jasonanderson5012]

DUDE! Thank you so friggin much for posting this! For days now, I have been searching for the correct way to remove these clips, all I've come across are people breaking the clips, then paying a ton of money to have a mechanic replace the fuel line, or some hillbilly rigging to keep the fuel filter in place. Thank you again!

[@chrisfix]

No problem Jason! Glad the video was helpful!

[@comedianmusicianman]

Even though the tubes were different sizes I think it's good practice to label them if possible just in case. Also I think writing the mileage on the filter is a great idea! Thanks for another great video Chris!

[@chrisfix]

+G-Man Thanks a lot for the tip!

[@MrMarkar1959]

lol,,just like tattooing Entrance and Exit on the Ol'lady's holes

[@American_Devil]

This guy is a genius

[@chungaleta1234]

marking the milage on the filter itself abd the pen cap tip made my day.... every day one can learn something.... thanks.

[@chrisfix]

+chungaleta1234 Glad you learned some new tips!

[@trustissues3461]

Wow Chris your channel has really taken off, I remember when you had 50K subs almost at the 500K mark keep up the good work bro!

[@chrisfix]

+ric ric Thanks a lot man! That is all thanks to subscribers like yourself! I really appreciate the support!

[@dominicboothman]

@@chrisfix crazy, from 500k to 8mil in just about 5 years. Congrats bro

[@911Privacy]

Thanks, Chris I am from Saudi Arabia . Your video was greatly helpful to buy this tool and changing out the fuel filter easily.

[@fred306801]

you made that look way to easy. Every time I work on my truck there is always some thing that does not want to cooperate. I changed out the coolant housing. It has two coolant sensors. Pull the clip out, pull out the old sensors, drop in the new and put the clip back in. Sounds simple, First off they sold me the wrong sensors. I tried to put the old one's back in. The two little clips Refused to go back in. After four hours of praying to swearing I said to the hell with it and used paper clips. So far it is working with no leaks. Had I gone to the Ford dealership and got the OEM parts I may have gotten the right parts and not have had to go through this torture.

[@leightonpenn9861]

You’re the man!! Been watching your videos for a long time and have learned most of my stuff by watching you! That pen cap tricked just helped me out a bunch. I’m tight on money and every little bit helps. Keep up the great videos!!

[@tammys.8513]

Hi Chris, Genius 💡 Idea!! homemade diy tool, a Bic pen cap. Took a couple reWatches for me to learn, push, The Twist. Worked like a charm on my '04 Suzuki XL7 fuel filter connector. Whoo Hoo 🎉 Thank You! 😅

[@davidwellman7080]

I watched several videos changing a fuel filter on a Mazda Ford whatever and this was by far the best. it was very clear and it was helpful. thank you.

[@catchingfadesclashroyal6506]

Excellent video. I looked at another guy's that came up first on a Google search is nowhere near as explainative as yours. Thank you very much sir

[@Fastdade36]

5 years later and still helping out 🙏 making my homemade removal now.

[@danielleewild]

as always chris brilliant video well thought out and explained, a genuine credit to KZbin and for everyone learning these skills

[@chrisfix]

+Daniel Wild Thanks Daniel!

[@VashthStampeede]

Nice video but... The first two lines had a connector that just required a finger press on the clip to remove.

[@philb5593]

Yep, just spent too long trying to figure it out. Found this video, but discovered this proper method

[@CMBstuff]

i tried that simple press the clip but it did not work, the space is to small to get my hands to apply enough force to release the clip by just pressing...this video much better all around!

[@jbthestoner5504]

I just pulled out the clips on the first 2 just like he did with the screwdriver on the last one. So much easier than that damn "quick" disconnect tool.

[@vinceandtheresa1243]

"Boom! It's that easy"! Nice job.

[@chrisfix]

+Vinceand Theresa Thanks!

[@THEGLASSMANSWORLD]

I'm lacking tools and this hack may just get our Explorer running again! My brother helped me get the fuel pump replaced but we couldn't get the filter off. His plastic clips wore out and he ran out of time. I might be able to finish the job now myself! Thanks for sharing!

[@larrymartin344]

Awesome! I'm getting the quick disconnect tool for my 2002 Ford Ranger. I can't believe how simple this is. Thanks Chris!

[@chrisfix]

+LARRY MARTIN No problem!

[@MrMtr999]

Great video, I just changed my 99 Kia Sephia fuel filter, after learning everything from this video, awesome job on explaining procedure. Great job !

[@andygegmal3162]

Chris Fix, your video help fix my car many time.

[@mikewangrud6475]

Another great how to video Chris. Gonna change my filter next week.

[@ChefMarkyMarkz]

I love watching these videos knowing well the car i have is beyond repair.

[@davidc8122]

Much thanks, again, Chris. I finished changing out the fuel filter earlier today on my 2007 F-150. Your video was greatly helpful.

[@chrisfix]

+David C awesome!!! I'm glad the video was helpful and nice work!

[@edward569]

Best instruction on this type of filter Chris.

[@nahuelluna7071]

thank you! the homemade disconnect tool is awesome, i want to try it

[@chrisfix]

+nahuel luna No problem! Glad you liked that!

[@nikitamckeever5403]

Saved me a whole £5.40 and a three day wait . Thank you so much 🙏😁👍

[@piecrustyumyum]

I did it! Got fuel all over me in the process...but did it none the less! It's a motorcraft filter so I'm assuming it's stock. My truck has 212,000 miles on it xD I've ordered brake kits for the front and back, caliper's, pads, rotors, drums, shoes, springs and hardware, and gonna do full brake fluid flush, looking forward to it!

[@mubziv388]

I dont even have a car but i still watch your video's :) but they will help me when i have a acar.

[@djenglandpoli]

it has a quick disconnect u don't even need tools, but if its stuck its a great tool to have! GJ

[@Puck90a]

Just replaced the fuel filter in my 2001 Ranger. This video explained everything perfectly. Thanks!

[@nonog294]

lol so funny i just replaced my fuel filter yesterday checking on your channel to see if you had a video on this lol

[@chrisfix]

+Noel Gill hahaha nice!

[@williamwixon]

thanks ChrisFix, whew! that was helpful! my truck just STOPPED running, luckily I was close enough to COAST home. figured it was the fuel filter. after some difficulty and checking your video got a new filter in and it's running fine now. only cost me nineteen bucks for the filter. happy.

[@chrisfix]

+William Wixon awesome!!! Glad the video was helpful and nice work.

[@jcharles1470]

Chris!!, great idea and cheap using a cap pen!!!!!!!Thumb up!!!

[@chrisfix]

+j charles Thanks bud!

[@RoMelloRomero]

I've got a 1998 Lincoln navigator. I'm about to change it. Only difference is the frame is kind of in my way. I'll let you guys know how it goes. thanks Chris if you have any tips on how to do this better on my particular vehicle please let me know.

[@alexavila7813]

i wrote my last comment before i finished the video man this is an amazing trick i was under that explorer for an hour trying to figure out how to pull it off. will keep this trick in mind just incase

[@chrisfix]

+Alex Avila Awesome! Glad the video was helpful bud!

[@alexavila7813]

+ChrisFix honestly thank you chris ive had alot of trouble with lots of cars and your videos put me straight through. i have some really nice kenwwod 6by9 in my 04 chevy impala thanks to you lol

[@halcyon1017]

Nice video. I did this on my car a few weeks ago. Didn't have the quick disconnect tool, so it was a struggle pulling the pipes off!

[@chrisfix]

+Halcyon Thank you! Now you know you can make one out of a pen cap!

[@ScubaCat3]

Nice on the pen cap! Some Fords have a button you just press. I haven't actually had the issue with fuel leaking out of a full gas tank (filter in the same spot on our Ford). I wouldn't remove the gas cap with that thing disconnected, though! Thumbs up as always!

[@chrisfix]

+ScubaCat3 Thanks and thanks for sharing!

[@jgarb21]

I was curios about whether this was important or not. I only replaced my fuel filter one other time and did not pay attention to the amount of gas in the tank. Honestly I do not even remember "releasing" the fuel pressure.

[@franciscogomez-ge8fk]

Thanks man for the video it really helped me I just installed a new fuel filter in my ranger with that homemade disconnecter, thank you

[@xboxhater12345]

I changed my 2000 Ford Rangers fuel filter and fuel pump and Im still having issues starting this truck. It originally started fine, until I changed the OEM fuel filter with over 200k miles on it. after that fuel filter change the truck wont start first try anymore. I know I did it properly because its the same exact process that I did on my 1999 ford ranger and that had absolutely no issues! what do you think it could be? maybe the fuel filter itself I put in there is bad?

[@leckst3r]

Can confirm, home made pen cap rigged quick disconnect worked like a charm. Thanks +ChrisFix!

[@sergiogonzalez6117]

Great video Chris! I love watching your videos, I learned everything I know because of you! Keep doing what you do best!

[@chrisfix]

+Sergio Gonzalez Thanks a lot Sergio!

[@seabee668]

Nice work. Hey Christ have ever done the brake line replacement on this truck? The lines beneath the ABS box had the flexible, stainless steel braided lines, they looked like push connect, I couldn’t find the proper tools for this. If you know the best way to got lines replace, please kindly share your method. Thank you.

[@swmkh]

Good job Chris - your repair videos are the best!

[@heathercortes9567]

I replaced my fuel filter last month. I did it according to what the manual said...sort of. Take off gas cap. Park on hill with engine pointing uphill. I drive with the tank mostly full all the time since I have lots of kids. Negative wire off the battery. I had bought the cheap plastic disconnector tool set. If you live in a place where they salt heavily those don't work. The filter was rusted in and, the plastic broke. For some reason there is a clip near the fuel lines. I clipped them up to keep from getting gas everywhere. There's a hole in the wheel well I use for the same reason to hang the brake line when changing calipers. (Don't ask. Just picture a couple of my sons taking the car one night while I was sleeping after seeing Fast and Furious. I almost killed them the next morning. ) I borrowed a scissor disconnector from a friend. Filter was off in three seconds. If you live some place they salt heavily make sure to check for other stuff while you're down there. I found some things that needed repair from rust while I was working. I don't go under too often since the neighborhood idiots always stop by with moronic comments about women or like to skid by to blow road dust in my face while I have my shoes poking out from underneath.

[@JustinDGates]

LOVE IT!! Short and sweet and to the point, and i always write the mileage on my consumable parts too. Beats paper that gets lost or destroyed by oil! Thanks for the heads up, keep up the good work!

[@TheCarista]

+Justin D. Gates why not write it into your computer? That´s a real safe method :)

[@JustinDGates]

+TheCarista Got an app for that??

[@TheCarista]

I use simply open office bar chart or whatever its called in english. In german its open office tabellendokument. Or just simply write it down in word or whatever :) You do not need an app at all

[@chrisfix]

+Justin D. Gates Thanks Justin!

[@mattman4181]

Great video. Why are there 2 inlets on the filter? Twin tanks?

[@zaccaria9769]

Nice vid-you saved me 20 bucks by using the pen lid trick

[@DanielFoerstner]

Chris's clips looks real similar to what i had when i had my '02 ranger with the 3.0 all I had to do was push in on the clips and the hoses came off.

[@mikea-strong5020]

+Daniel Foerstner I was going to mention this myself. I have an '02 Ranger 3.0 and with those orange and green clips no tool is actually needed, you just have to push on the orange or green part, and pull on the line at the same time, to release the lines from the filter. It is very simple but took me a while to figure out!

[@chrisfix]

+Mike A-strong +Daniel Foerstner Thanks for the tip! I wanted to show how to use the quick disconnect tool because most fuel filters do not have the clips to push on.

[@AndrewHeinrich1612]

Well, this is something that I will do this weekend. Thanks Chris!

[@chrisfix]

+Andrew Heinrich No problem Andrew!

[@harrisonrawlinson5650]

I’m going to try and do the fuel filter on my Ranger, I’m assuming that running the engine and removing the fuel pump fuse whilst it’s running isn’t a brilliant idea with a diesel?

[@walmark4592]

Great job Chris. Love all your videos. Very down to earth and informative.

[@chrisfix]

+Mark Akin Thanks a lot Mark!

[@crazydudetz]

I noticed the scheduled maintenance guide only goes up to 150,000 miles for these vehicles. What would you do after you cross that mark?

[@josephgonzales3857]

Thank you so much Chris I have a Mazda truck like yours mine is a 2000 b 2500 I didn't know where the filter was now I can change it love your vids

[@sherylclanton6840]

is project police entersepter coming out soon

[@Giovanni_Litterini]

Interceptor

[@V8SKULLS]

Thank you Chris, you have been very helpful, keep on doing beautiful videos

[@brandonmccall3929]

Did it help the performance when u change the fuel filter

[@martinblouin3639]

you give good tips man

[@chrisfix]

+martin blouin Thanks!

[@camaroguy4390]

I'm really interested in the GM fuel filter replacement video, hope you post it up really soon!

[@chrisfix]

+Robert Ponce That will be done in a month or so. I am squeezing in some awesome videos this next month!

[@camaroguy4390]

+ChrisFix awesome, I enjoy all the knowledge you're giving us all, can't wait for new stuff to come out!

[@chrisfix]

+Robert Ponce Yea, I am working like crazy! No breaks for me until after the new year!

[@ultrafilms3859]

You help me so many times and heck you may have saved an accident from happening :)

[@chrisfix]

+UltraFilms AWESOME! That is what I like to hear!

[@Lukehart1953]

BEEN SEARCHING ALL DAY FOR THIS VIDEO THANKS AND GOOD JOB

[@RealityIsTheNow]

What if the quick disconnect tool can't fit around the fuel filter tube because there is only 1/4" exposed?

[@thekodanator]

Thanks man, should have searched your channel first.

[@shaigansaskue]

i don't know if you'll have any idea what this is but its worth a shot I got a 03 tiburon that was overheating i just had the thermostat replaced 2 days ago now that its been replaced the Odometer stopped gaining miles and the speedometer works on and off, also the temperature gauge takes and extremely long time to climb up but it never goes past 1/4 radiator cap hasn't been getting hot either. Its a shot in the dark but i'm open to suggestions. Thanks Chris!

[@chrisfix]

+EternalGZ10 Sounds like there is air in your system so the coolant is not circulating. Either that, or your new thermostat is not working right or was not installed correctly. The odometer not working is a different problem and most likely electrical.

[@1badpete999]

Some say that once the safety clip is removed its isnt good anymore the safety latch break off at the end you gotta buy another new safety latch ?

[@dixoncider7256]

I love those style of connector clips.

[@chrisfix]

+Dixon Cider Yea, it is actually a lot easier (when they work).

[@therealandrewcano]

So I should pull the fuel pump relay while my truck is running??? If I don't will this make it difficult to remove the filter? Cause I'm having a hell of a time getting the filter off. 😵

[@arkhamcityfreak]

hello Chris, I have an F150 that I’m trying to trouble shoot crank but no start on and I want to try changing the fuel filter. Problem is I had just filled up the gas and now it is not running. How else would you go about disconnecting these lines so the fuel doesn’t spill everywhere?

[@jesusduarte5034]

Do you know what maintenance we can do if our car does not have a gas filter? I have a ford scape 2010

[@zedman442]

Nice tips, hate changing fuel filters!

[@chrisfix]

+Zed Man Thanks!

[@paxonearth]

Any need to lube the ends of the new fuel filter?

[@wanmuhammadimran6987]

chris do you have any idea for my final year project in automotive studies? tq

[@liangyu9198]

I have a 2001 focus zts. I started up the car and pulled out the fuse (fuse #12 in my case), but the engine still ran. I think it should shut off in 5 seconds, but I waited for at least a minute. Do you think anything is wrong? I also watched how people change fuel filter on the same car as mine, their engine shuts right off after pulling out the fuse, which is at the exact same location in the fuse box as in my car. I don't think I pulled the wrong fuse. Do you have any other way to release the fuel pressure? What if I don't release the pressure?

[@stevekwall925]

Hi Chris , I noticed you were using a 1/2 inch disconnect tool I am using a 3/8 tool on my 1999 ranger and I can't get it off would that prevent it from coming off ? or does it have to be 1/2 inch ? love your program Thanks.

[@jorgealonzo8004]

For mine I can’t get the single one to remove it. You just pulled it out but mine is so tough. Thoughts?

[@panchoreyes1]

it is exact same procedure on 2008 ford focus and the same filter as allways an other great video Crisfix THX great idea the cap pen!!!

[@chrisfix]

+Francisco Reyes Awesome! Thanks for sharing bud!

[@TehCZL]

Make a video on how to make exhaust louder and deeper

[@chrisfix]

+Levi - Top 10 Videos! That is a good idea!

[@louisphng1]

+ChrisFix long time no see. Could you make a video about the differences and purposes on sockets. there are metric and sae sockets, deep and regular sockets, impact sockets.When we need deep impact socket and why? Is the deep socket have a good torque force than regular sockets?

[@BakuganBrawler211]

BimmerGod Cut off the muffler or put on a cherry bomb or performance muffler

[@zacharysantymire8995]

hay Chris do you think you could do a video on changing transmission fluid. I have an 02 doge neon that has been sitting for at least 4 years now if not more and it has 147,000 miles and I wanted to change EVERYTHING on it. I found your power steering pump drain really helpful along with all of your other videos but haven't seen a transmission video yet. thanks for making great videos and keep up the amazing work man.😀😀😀😀

[@gonicjon]

great vid...good close ups of the tool in action...and great improvisation

[@dynagaming2693]

I was unaware there was a tool for these lines. Was replacing my fuel filter on my 07 Focus a few months ago, ended up breaking one of the clips (the ones they include with the filter don't fit and you have to shave them down). If you ever need to replace one of the clips with a new one, go to the store and look inside the boxes of the fuel filters, I cannot remember the company that makes it, but one of them has the line clips and they're a perfect fit. You can order them online, or just spend an extra $10 to get 2 clips instead of having to wait on shipping or have to replace the whole line.

[@MasteringHow-To]

Awesome tool!! And Chris. You're almost at 500k that's amazing!!! Hey. Soon I'm making a video on my M3 supercharged build. Be sure to check it out.

[@chrisfix]

+General HowTo Thanks a lot! Yea, it is pretty exciting! I cannot wait to get to 500k! I will check it out for sure!

[@FOREVERaPILOT]

Should you flush your fuel system before you do replacement or after? I would assume before would be better

[@rezagrans1296]

noticed the writing in the quik disco tool: Ford truck fuel line us 1/2" i.d.? crazy thick