Your content always impresses us !Thanks for the awesome review!
@timlong7289 Жыл бұрын
I have to say in a blind test I picked the DJI V1 Nebula Pro. Then I noticed my stream was at 480p, so I set it to 4K and that changed my choice to the DJI O3. I have no skin in the game so I'm not biased, in fact I would rather support Avatar than DJI, but it looks like they are still behind in terms of image quality.
@ChrisRosser Жыл бұрын
Yes in terms of image quality DJI V1 < Avatar V2 < O3 < Go Pro.
@lorinwingtips5290 Жыл бұрын
Awesome review! thanks for taking the time to do this sort of thing! :D Mine's ordered!
@johnkurpiewski3996 Жыл бұрын
This is great news!!! I’m absolutely going with the pro on my next project, low light is a huge deal for me especially when the days get short. I’m so excited that walksnail are doing such a bang up job !!!
@aphinion Жыл бұрын
For a few-hour-rush vid this is quite excellent value! One thing we constantly miss from those video link comparisons however is how their break-up behaviour is and how latency drops over distance/disturbance. A lot of peeps for example find, that the O3 is much more consistent in latency... and while higher on the bench, since it keeps it much more stable, in reality it's a lower latency link than the Vista/Air Unit. And you can see it in the results - like PhantomFPV suddenly and finally making those tower/chimney dives or Limon actually flying it on his Open Racer whenever he can. It is also said, that HDZ 90fps mode seems to have higher penetration than their higher quality link options... stuff I'd really really really love to see in a scientific test scenario. Any hopes that you could come up with such a test? :)
@jojomajo Жыл бұрын
Best fpv channel for me, true science of fpv right here!
@baggszilla Жыл бұрын
Hmm! This really opened my eyes to WalkSnail! Thanks Chris and thanks WalkSnail!
@tecknolt2695 Жыл бұрын
Thanks Chris, excellent analysis 😀
@MysteryD Жыл бұрын
Holy shit. The twilight footage of the V2 pro is awesome.
@J_Madison6 ай бұрын
Thank you for all that you do.
@bambusgott4106 Жыл бұрын
Thank you for all the dense information!
@gmascagni Жыл бұрын
Id like to see a test where you put the new v2 up to 800w on the VTX with out the heat sync and see how it performs and for how long on the bench and in the air. Not worth doing unless you know the results. I wonder what the longevity is gonna be like when you remove the components that help keep the heat in check.
@zira_fluff4105 Жыл бұрын
Great coverage of Avatar V2. I'm still on V1 goggles and airunit/vista and never upgraded to V2/2 goggles or O3 and likely will not do so with how far Caddx/Avatar is progressing. I would add that another con to DJI O3 is the encrypted log files generated that are currently not user readable which is uploaded to the mothership DJI when using the DJI assistant software. That is a privacy violation on O3 since we don't know what is being sent to DJI. I don't have Avatar yet - but I suspect they don't upload encrypted log files.
@creationlabsinc.189 Жыл бұрын
Yes! Your park flying is critical to Dji!!!! Tin foil hat much?😂
@feelfree.1 Жыл бұрын
DJI O3 actually has ISO 25600 (can be manually set) for low light situations. Did you use this in the test?
@klingusmctavern8672 Жыл бұрын
WTF….is this changed in the Google’s ??
@CalleyyyC Жыл бұрын
Watching in 4k and I paused it before the cam reveals and thought the two on the right seemed to look best, top right the tower looked the best but has some smudgy looking foliage, bottom right the tower looked slightly hazy compared to top right, but less smudgy in foliage - possibly focused at different range idk. I don't have a trained eye for what all to look for by any means. I don't own DJI, and still have my sealed WS VRX for months now that I'll try out some day when I get time. I've just been flying the 90fps HDZero cam and really enjoying that with the time I currently have.
@ChrisRosser Жыл бұрын
HDZero 90 is awesome. It really does feel different!
@caffeinecreature Жыл бұрын
Even at 2x zoom I kept thinking that the V2 Pro image was coming from O3, and the Nebula Pro image was coming from the V2 Pro. They are really close to each other!
@ChrisRosser Жыл бұрын
Yes, there is not much in it at all!
@originafreerangechicken Жыл бұрын
Great job, Chris.
@douglasyoung3992 Жыл бұрын
Best review of the v2 yet!
@JavisHD Жыл бұрын
I find the most important metric to me is range and penetration. I really like to fly in areas with lots of trees, I'm skeptical that anything can complete with DJI in this regard, but I'd love to stop getting DJI, everything else about Walksnail seems ideal for hobbiests. Please do a range / penetration comparison before I upgrade from DJI v1 to DJI o3!
@TweakRacer Жыл бұрын
Would have liked to see a Polar (full-size) vs the V2 Pro in low light. Also, in that case the Polar/Vista is cheaper. * (* Price doesn't matter across incompatible platforms, as you couldn't buy a cheaper V2 cam/VTX and use it with DJI goggles/transmitter.) BTW, that V2 Pro Sony Starvis sensor appears to be the same as that used on low-mid end dashcams.
@Fly_High_FPV Жыл бұрын
I'd like to see v2 vs polar also
@jtroutt19 Жыл бұрын
Also Mr. Rosser it would nice if your aos-7 frame description included that you need a longer cable than stock for the o3 camera to unit cable.
@justainchoe6141 Жыл бұрын
Excellent video Mr Rosser.
@aerialimagery3216 Жыл бұрын
If you manually adjust the shutter speed and iso of the 03 camera, it performs so much better then auto in lower light situations. The image goes from very dark to looking really good.
@doom3crazy Жыл бұрын
What settings do you suggest?
@ChrisRosser Жыл бұрын
I'll have to give that a go!
@doccock100 Жыл бұрын
madstech did that in his video i think
@aerialimagery3216 Жыл бұрын
@@doom3crazy to be honest I am not a camera guy but if I am flying on cloudy days or when it’s darker, I just lower the shutter speed until it looks nice and it works great. I was flying yesterday and there was thick cloud cover and the auto settings and the shutter speed somewhere around 800 and I lowered it to between 300 and 400 and it made all the difference in the world.
@tk-maker Жыл бұрын
@@doccock100 Madstech set it to 30 FPS lol, I am complaining Polarvista 60FPS and want me to fly 30fps at night? too much for me.
@k4x4map46 Жыл бұрын
Nice!! This system I'll put on my AOS7 build and analog on the Falcon 7. Just need them new digital googles!!
@DavidH-i4p Жыл бұрын
Great review 😄
@KrotowX Жыл бұрын
I'm curious where Walksnail development will go. V2 capabilities already look veeeeery tempting as next step above DJI V2 + Vista. The only question is what to do with my remaining analog quads, particularly Mobula 7 whoops.
@rainsld Жыл бұрын
Would be nice if you would have all 4 cameras at a set mount so that they move at the same speed. Also maybe then comparison freese frames both moving and still motion. Otherwise great job, thanks for the information
@klingusmctavern8672 Жыл бұрын
Really looking forward to testing my newly installed Walksnail avatar HD but could not bind with DJI goggles, turns out caddx only works with caddx unless you have the polar vista which only works with DJI goggles on an older software update so beware…now using O3.
@Lucianrider Жыл бұрын
One advantage that the Vista has is the built in receiver. If you like the DJI version 1 TX then its a no brainer to just drop a Vista in and setup SBUS and you are good to go with no receiver needed.
@bobHfpv Жыл бұрын
Why not compare it to the polar in the low light testing?
@Joao-vitor19 күн бұрын
I can use it with glasses Walksnail Avatar HD Goggles X?
@semadragun Жыл бұрын
Great to know the cameras can be changed, so it's worth getting the V1 for Diversity and using the V2 camera.
@Top-Jimmy Жыл бұрын
Brilliant review! *SUBBED*
@rafaelgonzalezmorales1824 Жыл бұрын
03's resolution and colors are better, but not sure if proportional to its price!
@hristiantodorov3923 Жыл бұрын
Walksnail is the way! :)
@marc_frank Жыл бұрын
having seen them before, it was pretty easy to discern all 4 systems in the blind test it might have been helped by the logical order you placed them in, a random position might have made it more difficult while the O3 image quality is clearly supperior, the WS Pro looks better than both V2 and Vista the higher resolution sensor "supersampling" makes the image look less pixelated I've also noticed my Nebula Pro being focused quite close, while the quad was sitting on a lawn, the ground ~2m away was in focus, while trees in the distance were a bit blurry in comparison that might be something to check for each of these cameras
@ZVella Жыл бұрын
Great stuff dude. Much appriociated. I had a qq, if you dont mind. Would this work as an onboard camera? Just hit 'record,' go RC around and hit 'end recording' when im done. No transmission or anything like that. Just like a dashcam but for my RC car. Again, appriciated the in depth review.
@neilfpv Жыл бұрын
WOW that DJI O3 image quality is great! I want to buy one but I need to do more research. The other 3 are great too! Am I right that O3 cannot have 4k recording while dvr is 1080? I remember reading a thread saying there were issues. However, I could be mixing up issues since it's been a while when I last read it.
@KOrnhOliO1 Жыл бұрын
First off, the DVR would be recording in 4k and you could be flying in 1080p in your Goggles 2. I haven't heard of any issues doing this. Yes, 03 is still the leader of the pack!
@neilfpv Жыл бұрын
@@KOrnhOliO1 Got it. I think they were saying some issues in recording specifically if I recall correctly, they were saying you can't mix-match these resolutions. That's awesome if it's working well. Hopefully I'll be able to upgrade to it. I'm still on DJI v1
@redcobra1246 Жыл бұрын
@Neil "NeilFPV" Camara you might be talking about 120fps causing latency issues vs 100fps
@neilfpv Жыл бұрын
@@redcobra1246 maybe. I didn't pay attention too much because I don't have O3
@divingfalconfpv4602 Жыл бұрын
I been meaning to do an indoor vista vs walksnail 1s mini and outdoors. My Vista goes blurry so fast. I'm about to try replacing antenna
@TristoMegistos Жыл бұрын
I like that scale. Can you give me a link to the shop?
@razorblade7108 Жыл бұрын
I would say the O3 has the best image quality, good contrast and good brightness with the V2 Pro coming in second, having worse image quality, but also good contrast and even better brightness for low-light conditions. The main difference I see between the Avatar V2 Pro and the Avatar V2 and Nebula Pro is that the latter two seem quite a bit darker with potentially worse visibility in low-light situations.
@doccock100 Жыл бұрын
Nice summary. I was mntally disagreeing with you about the conclusion until I gave you time to complete your sentence. it is not the best at any one thing, but it does a pretty good job at all. Jack of all trades and master of none, is more often better than a master of one. (frequently misquoted by omission)
@ExplorewithZac Жыл бұрын
Are the 25.5x25.5 mounting bolts M1.6 or M2?
@ChrisRosser Жыл бұрын
M2.
@TotallyNotNuclear Жыл бұрын
Bro your frames are 🔥🔥🔥
@michaelburke1310 Жыл бұрын
might be interested if we ever get some flight audio on the digital systems, until then 100% analog for me
@alainassaf Жыл бұрын
Hello Chris, thanks for this awesome video. I am rewatching it but can't find if and where you talk about the 3/4 ratio for the new cameras. I am using 1- avatar VTX with a fatshark HDO v1 with 2- the early walksnail with standard camera and the one with the micro camera.. I don't like the stretched image so much, so would one of the new cameras solve my issue (I don't want to see a stretched image) ?
@Kpiiica4580 Жыл бұрын
New cameras works with V1 vtx with no problems? So the only difference between new and old VTXs aregps noise and gyro data? Right?
@ChrisRosser Жыл бұрын
Yes, new cameras work with old VTX and old cameras work with new VTX. The main differences are that some of the new cameras have gyros and the new VTX has better packaging and a 32GB storage option.
@Zentriefugal Жыл бұрын
Hey Chris, don't take this as an offense but this review somehow doesn't seem as fact-based as your usual videos. There are several things that raise questions. 1. Depth of the mounting threads The depth of a thread should always be at least equal to the thread diameter. With a pitch of 0.5 mm, a maximum depth of 1.5 mm can be achieved with 2-3 turns. This is definitely too little for an M3 thread. 2. Filming in low light Since the aperture is fixed in the O3/Avata system and the shutter speed depends on the selected frame rate, it is up to the ISO value to compensate for the lighting conditions. Which setting was used for the comparison shown here? A fixed value or was the automatic activated? 3. Range and penetration The biggest advantages of the DJI O3 Air Unit over the Avatar system have always been range and penetration. However, these values are not compared here at all. Please don't get me wrong, I'm certainly not a DJI fanboy and usually I totally dig your videos but this one seems kind of... bought.
@Mr_Meaty Жыл бұрын
How does the low light performance compare to HD Zero?
@BoondockStryker Жыл бұрын
I picked dji nebula but they were close. Anyways I would like to see a comparison between HD zero or analog to the Walksnail for night flying. In your past videos analog was way better for night than all digital. So I already knew DJI would fail miserably.
@mateuszpachulski6211 Жыл бұрын
hey Chris, the recording quality of dji o3 is in my better than that of avatar v2, however how is the difference when using hdzero googles with walksnail and dji google 2 ?
@skyweaver3199 Жыл бұрын
I was able to tell all of them except which one was avatar v1 and 2. I am gonna say until walksnail is providing the same latency ans range as dji air unit/[air unit lite , vista, link etc] I can't consider it....If you look at this graph it looks like a small difference. But to me its enough of a difference. I do hope it does well though.
@antoniomarroquin3649 Жыл бұрын
Does this avata pro compatible with DJI goggles ?
@jakub9916 Жыл бұрын
Which 5.5" prop do you recommend for AOS?
@captain-22 Жыл бұрын
hi chris . if you have the older v1 without gyroflow and you purchase v2 with gyro flow..then u decide to mix and match camer/vtx..my question ::: is the gyroflow hardware in the camera or vtx.thanks
@SebastienChedalBornu Жыл бұрын
i really wonder how the range and penetration compares between the v1 and the v2 with a enhnaced antenna (according to caddx store page)
@slappomatthew Жыл бұрын
per JB video its not significantly better.
@AfrikaanseStoisisme Жыл бұрын
mr sir, can you tell me about what these are?
@DavidOwensuk Жыл бұрын
So would the Walksnail system work for racing? Great video, thanks for sharing….
@andreastornesel8404 Жыл бұрын
The way my DJI goggles fit my face despite numerous mods is painful, and made me prefere analog despite the image qulity. When I got the HDz goggles it was bye bye DJI, only using them with my scout drone DJI FPV (love it for exploration), now I have the Fatshark avatar goggle with fantastic fit and god image quality with only 1g weight penalty over hdzero in 1s, I'm in love
@shiggzitiz6463 Жыл бұрын
Hi Chris, I bought an AOS 3.5 V2 frame when they first dropped and a friend recently bought his AOS 3.5 V2 which has the bigger 03 mounting ability. I was quite shocked though to find that the entire frame is quite a bit bigger than mine, the top deck is about 1.5cm longer which has given him plenty of space for mounting. We both have a similar issue though where when mounting the stack up front, the camera mounting plates interfere with the 2 front stack screws. Do you have any suggestions because when i built mine, i ended up having to shave off some of the carbon which eventually snapped off completely. His newer and larger frame still interferes with the stack screws but he got away with then pressing against the nuts instead of shaving the carbon. This leaves the stack locked with no sideways freedom.
@reinhardplietsch9707 Жыл бұрын
no hints about gyro data?
@hknight007 Жыл бұрын
Thank you for your great video, only want to address this recomendation you made: "I think in every way is better than the Vista... a Slam Dunk" I think of a few were the Vista is better: - LongRange - Latency - Stronger Signal (in places were there is signal interference like urban) - Has RX included - Way more mature system Other than that was awesome, keep up the great work. Could the new Caddx Pro Camera be compatible with Vista or O3? Best regards.
@ChrisRosser Жыл бұрын
Ok I can certainly agree with some of those points. For me personally: -DJI has a hard range limit. WS Avatar doesn't so I think it's better for long range. - Latency, WS Avatar is just as fast as DJI to full frame in 720p100 no advantage to DJI there any more. - Penetration might be an area where DJI is still ahead if unlocked to 1000/1200mW. - Included RX is useful if you've already got the DJI controller. If not ELRS is a better choice. - I think the vista is on the brink of being completely abandoned. We were super lucky to get forwards compatibility with Goggles 2 (at the expense of the V1 goggles) but the longevity of the vista is super questionable given DJIs approach to old products. WS Avatar seems to be keeping backwards compatibility with everything. No one should be buying in to Vista's today and expecting new hardware for the system going forwards. I don't think Caddx will be supporting the Vista going forwards in any way. They can't even buy the VTX any more. They'll sell what they have but I think as a platform it's on the way out.
@sunnyfpv3694 Жыл бұрын
-Of course, up to 12km and then avatar picks up with no limitations -Ok, but if you don't do agressive freestyle or if you do long range, it doesnt matter until it is below 100ms -Tested, but not too much, no difference in side-by-side comparsion -What does that mean? -Which makes you follow many rules, makes you pay more for less, in order 'to just have it'. Dji is a girlfriend.
@hknight007 Жыл бұрын
- 12km of strong and reliable signal is more than enough (for me), its true that WS has no limitations in paper but in the "real world", in a scenario with "signal interferences" I dont think that WS can even get to 12km anyway. - While they might the same in paper, I think DJI performs better (for me). - No reply needed here. - It means that with a Caddx Vista you dont need an additional rx receiver from another company, this specially good in areas were you need strong signal like urban areas. I had to change all of Crossfire receivers because of this serious problem (cellphone towers) and started to rely on the Vistas rx receiver, all my quads works flawlessly now and I dont have to spend more money on receivers or live in fear of failsafe LOL. this is a huge plus for me and WS is just a VTX. - More for less? come on lets be real here boys haha. While Caddx Vista (DJI Air Unit Mini) its on his way out for Caddx, Runcam its still selling the same "DJI Air Unit Mini" product with another name, this product is a mature/finished product that doesnt need more updates and works like a charm. WS in the other hand its an inferior and unfinished product that to this date its has issues (for me). DJI even made it compatible with the new Goggles 2. DJI its a hot and "useful" girlfriend yeahhh :)
@sunnyfpv3694 Жыл бұрын
@@hknight007 I respect your opinion, but in my own - there is not that much diefference was already at the freshly new start of the WS, while dji is ok, shitty, but finished and polished product. I would say that vista is in any way more stable at that range (up to 12km). My vista feed starts dropping at 4km with well positioned antennas. I must mention that we have crowded 5.8bandwidth in here. Also, at some spots i have drops down to 5mbps at 1km. And same with avatar, no difference. I mean, there may be a differece in digits of how soon it dropped, how far maybe ,or down to 6mpbs or 4 mbps, but there is no practical difference in both systems. This is only my conclusion based on my experience in my country and in my conditions.
@hknight007 Жыл бұрын
@@sunnyfpv3694 I also respect your opinion and its exactly as you said for me because the "DJI AirUnits" are better for me in the tests that I've performed in different areas of my country. Best regards and happy flying
@Chris_Paul1 Жыл бұрын
Do u know if u can get longer cables for either of these ? I know they sell them in AliExpress for the older models but not sure if they fit the newer models
@Top-Jimmy Жыл бұрын
Hi, I am switching from analogue to digital FPV and need a little advice please. It certainly seems like a perfect go to for someone like myself. I would like to hear from any experienced guys out there regarding compatibility with binding to an all in one screen or the cheaper Eachine digital receivers or goggles? So is it limited to what we can view the feed on? Or will it bind to any 5.8GHz Goggles or portable screen? I only need signal for 300m as this will be fitted to a 1m class Sailboat for racing. I have a GoPro 8 as my main DVR. - Im saving money to be able to purchase a set of Dominator v2.0 and would like to secure this kit before the world goes completely insane... But being able to use a cheaper screen/goggles in the meantime?. Thanks heaps in advance, Take care, From Australia.
@tk-maker Жыл бұрын
A night flyer. luckly i didnt put too much $$ into DJI eco system yet, still got time change to walksnail. I wish somebody compare it with polar vista
@martinkorinek5489 Жыл бұрын
I am still confused how to set FPS with my DJI O3 + Googles 2 ? Is it the "video record" settings or some different hidden one? And if so, which of 100 fps should I chose, can I choose 4k/100 or the lowest latency is for example only for 1080/100 ?? Thanks for any advise.
@ChrisRosser Жыл бұрын
Yes it's in the camera record setting. Resolution of recording doesn't affect latency only frame rate. So 4k/100 is the same as 1080p/100 for latency. Don't use 120fps with the goggles 2 as it's only 60fps in the goggles!
@martinkorinek5489 Жыл бұрын
@@ChrisRosser Thank you!!
@SK.SHAHED Жыл бұрын
I will mount a flight controller upside down Now I gave 180 degree on roll axis this is ok. Now if I want to change the yaw axis with inverted placement then should I give the value of the direction in which I want to change or should I give the opposite value?
@Middlestepofficial Жыл бұрын
I'm testing a solution with the new Raspberry Pi 64 MP camera to stream video over 5G. The Sixfab kit supports up to 1Gbps uplink and 6Gbps downlink speeds, you can stream HDR 4K - and at any distance.
@nerdCopter Жыл бұрын
9:08 and 10:34, are these all mounted on one mount, or are they independently recorded? i'd have like to see all on one mount recorded at same time to see any delay and fov differences.
@ChrisRosser Жыл бұрын
Unfortunately not, some are recorded together but I only have 1 set of avatar goggles so those systems were one after the other.
@captureinsidethesound Жыл бұрын
Personally, i strap a Samsung A52 phone to my drone that has MotionCam installed for lower light situations. MotionCam is RAW images and has the option to reduce noise with stacking. It takes sometime to process and the files are huge but it beats having mors noise in the fottage
@robertswanson6774 Жыл бұрын
Will this work with my dji goggles v2?
@sten6537 Жыл бұрын
If you are not counting the camera and the onboard recording + gyro. Is there a reason to get the V1 walksnail VTX? Are the dual antennas for penetration better for like.. indoor flights?
@1967friend Жыл бұрын
Curious that they went to a single antenna. Are we to assume that they’ve tested and determined That diversity antenna’s provided no advantage??? Or was this a weight savings trade off? We need an explanation.
@genjitsu7448 Жыл бұрын
I am not sure if this has helped me or not - It seems to be in conflict to what I was thinking coming in so I have to adjust to the new info. I would want to ask since it was not specifically called out in the video is how is the image quality in the different goggles - I have DJI V2's and I love how clear and detailed everything is when I fly. I am also confident that the image in the HD Zero goggles is going to be better than the DJI V2's. I am not sure if that is true for the DJI Goggles 2 (do i have their stupid names right? I have the older ones which i called the V2's...) Anyway I am also not up to speed on the quality or performance of the Walksnail goggles so that is also something to consider. I do want to ultimately get to a lower latency system and I sometimes regret not getting the HD Zero system when I bought in as I just bought in last October. So I guess the question is do the Walksnail goggles hold a candle to the HD Zero, have they solved thier break up issues, etc... can you use the Walksnail goggles to watch videos, etc... that would be nice. Now should we also consider the VTX goggle accessories that Walksnail and HD Zero both make? Are they as good as the goggles they make with the integrated VTX when it comes to the componentry, the features, the performance? Ugh, there really is a lot to think about but I do feel that the VTX add on's are just that - an add on which often means compromise. Your videos are excellent, very measured and informative, I enjoyed watching this one and a few others by you today as well. Thanks for the great work.
@wizardfpv7856 Жыл бұрын
Yes its a compromise. I just got the walksnail system and love it but when I go back to analog am like dam this is much better. Latency is so much better on analog kinda wish I gotten hdzero
@frankdaze2353 Жыл бұрын
Have a nice holiday bruh!
@ericnelsonnn Жыл бұрын
Jeeze O3 makes the avatar look like analog
@MCsCreations Жыл бұрын
Fantastic review, Chris! Thanks! 😃 Really fantastic system! It gets better by the day! Stay safe there with your family! 🖖😊
@hylaride Жыл бұрын
My only question is does this have much better range/penetration than DJI? That is one thing DJI did very well with....
@KOrnhOliO1 Жыл бұрын
Don't count on it. It wasn't even close before. Plus, the 1080p performance was pretty poor with Avatar, so poor that JB wouldn't even use it. So, that's something that needs to be critiqued.
@sunnyfpv3694 Жыл бұрын
If you are on the crossroads of choosing your system, i can name a few reasons not to choose dji. (I am fully dji'ed btw)
@KOrnhOliO1 Жыл бұрын
@@sunnyfpv3694 Yeah, I and many, have been asking DJI to PLEASE get their Vista/Link board down to one small board for micros and whoops. That's the ONLY reason I can see to NOT go with DJI, except if you were a hard core competitive racer. Then, HDZero would be the way, and that's about all it's good for, LOL, unless you enjoy flying freestyle within about 30 meters. Because beyond that, those craZy harsh on your EYE BALLS colored sparklies are way too much for ANY NORMAL PERSON to handle! :( Many think HDZero has the same breakup as analog, but that's simply not true. It's colored, the sparklies are bigger, and they show up SUPER BRIGHT in their great OLED goggles. I just think HDZero's technology is way, WAY behind the other digital systems. It's why Fatshark gave up on it and through it in the trash.
@sunnyfpv3694 Жыл бұрын
@@KOrnhOliO1 Also, the range. If you want to chill flying an airplane, you wont be limited with ws as with dji. Also, the price - the lowest you can jump into digital now is 300 bucks if you already have an hdmi compatible googles. Also the osd. You cant have it in DJI unless you jailbreak it, and its been 2 years while dji said canvas osd is impossible due to hardware limitation. Also the resolution. Also the averall image quality. Really noticeable if compare side by side fpv v2 vs avatar. Also community requests. I think, walksnail considers the community opinion (Thats why we have everything almost out of box).
@KOrnhOliO1 Жыл бұрын
@@sunnyfpv3694 For one, DJI can fly plenty far with an airplane...I just don't see the big deal about flying sooooo far away from yourself! Why? Cuz you can?! If DJI has a limit, that's the radius you can fly in, so you can fly that far in every direction....why is that a problem? or issue? I just don't get the up high in the air, long range flying! Boring as fuck to me! No obstacles, going up high in a straight line, if I ever did that, I'd be nervous about losing my quad, but if I wasn't so nervous, I think I'd fall asleep, from sheer boredom! You aren't doing anything with the sticks but flying in a straight line going far away! I just don't get how that can possibly be fun....maybe the anxiety and stress of possibly losing your quad makes it fun for some, but I just don't see that as fun! I thought the Walksnail VRX is $220. Are you not in the USA? Both the V2 and Goggles 2 from DJI have full Betaflight OSD. All VTX's. Have had for quite some time. Who cares how we get it...the instructions are like a Wizard to install a program on your PC. Easy as can be! You're right, the resolution and overall image clarity of DJI is still far superior to Walksnail, especially when you consider the DJI 03 air unit. It will record 4k/120fps on the built in 20gb storage of the on board DVR. All while flying with a crystal clear 1080P resolution in the OLED goggles. With V2 goggles, the resolution is 810P, which is still very clear. DJI can fly much, much farther from the pilot with that crystal clear image clarity even when flying low to the ground. It also breaks up much less that Walksnail does, even at a distance. Walksnail also had a problem with their 1080p, enough where JB doesn't even use 1080p because it has issues, and it's not any clearer. Hopefully they've finally figured it out with this new V2 system, but it's been that way since it came out, and JB says it really hasn't improved. It's really good to see Walksnail getting better and getting closer to what DJI gives pilots. More improvements is great for FPV! I love the size of the VTX's, and wish DJI would come out with a lightweight, one board solution for their FPV community! SERIOUSLY LACKING!
@dodgydamosfpv9734 Жыл бұрын
Cool the pro goin on my next build 😎
@pli3rs Жыл бұрын
Is the gyro in the camera itself? Is that backward compatible? Can we just buy these new cameras to use in the V1 VTX and still get the gyro data for gyroflow?
@visioneerone Жыл бұрын
*YES* to all your questions Amazing.
@ChrisRosser Жыл бұрын
Yes. The new hardware is fully backwards compatible. You just need to update the firmware on your V1 VTX!
@kandredfpv Жыл бұрын
Very exciting developments indeed, as IMO ths orginal Avatar HD cam's poor sensor performance really took away a lot from the system. Like many others I'm also keen for a review of whether the new VTX improves penetration and image quality.
@IanBeaty Жыл бұрын
Great video with a huge amount of helpful info. How does the low light capability compare to HDZero cameras? For my use case this is an important question. Also, you say this would be the only video sytem you would use, but would you race it if you were trying to be competitive?
@ChrisRosser Жыл бұрын
For racing HDZero is the only system I'd use. I mainly fly freestyle so I'm less sensitive to latency and want the better image quality, range and penetration. I would say HDZero cameras also do well in low light but I haven't side by side compared them.
@IanBeaty Жыл бұрын
@@ChrisRosser Sounds good. Thanks for the response. It would be really interesting to see HDZero and the new Avatar Pro camera compared side by side at night.
@mydayq Жыл бұрын
You also should consider that vista is very durable. It's a pity that you cannot say same for avatar.
@Wontonsoupz Жыл бұрын
Hi Chris. I tried contacting you via FB messenger and IG with no luck. I thought I ask you here. I bought the AOS UL7 from CNC. Do you have any stl files for the landing pads, immortal t mounts, GPS and SMA mount in the rear??
@ChrisRosser Жыл бұрын
Hi Linh! I don't have many STL files. But any on thingiverse for the AOS 5, 5.5, 7, UL5, LR5 should fit the AOS UL7. Brain3D has loads of great prints for AOS frames
@Wontonsoupz Жыл бұрын
@@ChrisRosser Thank You👍
@Wontonsoupz Жыл бұрын
@@ChrisRosser Another question I have is for the AOS UL7.... What tune presets did you use in Betaflight Chris?
@thirtythreeeyes8624 Жыл бұрын
I'm looking forward to the 1080p30 HDZero. Personally I'm trying to fly freestyle not peep in a neighbors window and HDZ will probably have comparable latency probably lower at 1080 for if I want to fly some slow cruising or long range and it can get the absolute best performance. It's really seeming like the best option more and more and for me the only option that will get me off analog.
@jtroutt19 Жыл бұрын
Not at 30fps….
@thirtythreeeyes8624 Жыл бұрын
@@jtroutt19 Been flying analog at 30fps for years haven't had any issues even so 30fps and lower latency is better than variable latency and a pretty picture.
@jtroutt19 Жыл бұрын
@@thirtythreeeyes8624 to each their own man. I dont race so latency isnt a big deal for me. I have no issues dealing with the variable latency. I know people that have huge issues with it though likes makes them sick. Im a sucker for image quality in goggle. And to get that i will deal with the negatives.
@wizardfpv7856 Жыл бұрын
I just got the walksnail and when I go back to analog am like dam this is much better wish I had gotten hdzero
@rolliseventeen Жыл бұрын
in the night: Polar 19mm. Daytime: what your budget prefers. overall the: O3 because you dont need a action camera any more. DJI still ahead, but they come closer. i cant see the night cap. over the polar in this short video and there were lights involved. i fly in really no light in view areas and the polar is so far the night king. lets see.
@doccock100 Жыл бұрын
Ahead at whoop and onboard recording?
@rolliseventeen Жыл бұрын
@@doccock100 i understand, there will be a point of decision when it goes to small 2s 1S whoops. i dont use them anymore, because i switched to naked Action 3 capable 4inch tube frame. still can fly up to 7min surprising speed.
@tk-maker Жыл бұрын
I fly polar too at almost pitch dark night (park/beaches with no lamp post), just light from far away restaurant. but from madstech test imho this walksnail camera will ditch polar far away.
@FlyingBuzzard Жыл бұрын
I assume Walksnail and HDZero will continue to improve their systems and get better over time, as DJI other than constant newer goggles being sold the system is basically where it will always be, with no more advancement in that area . SO time will tell who is who and what is what, but me, I fly analog anyway and have not even considered HD anything
@_Brando_69 Жыл бұрын
For 139 bucks per quad. I don't plan on using the gyro so no need for it. Still gonna run a go pro. 03 looks nice but still need a proper cam for professional stuff. I'm just getting back into it so I'm pretty sure I'm grabbing the fat sharks.
@fededabz Жыл бұрын
i swear 25.5x25.5 mounting and the dji mounting on the cam proves the manufacturers dont know what we need. i wanted to like it but dang.
@ImperialArmour Жыл бұрын
I'm really glad there's a serious contended to the O3. Days of DJI's daylight robbery are coming to an end.
@creationlabsinc.189 Жыл бұрын
Why knock the company that revolutionized the hd market in fpv? Walksnail is just copying but I get what your saying.
@definingslawek4731 Жыл бұрын
I'm not buying 500 dollar goggles or whatever to switch from dji to walksnail avatar, but what I would do is purchase a sony starvis camera from caddx for the O3 systems I'm going to buy!
@agtjackbauer Жыл бұрын
Nobody's telling you to spend five hundred dollars and switch 😂 It's simply a video that shows off a new product and compares it to others.
@matthewbradley8971 Жыл бұрын
Unfortunately, that would never work.
@definingslawek4731 Жыл бұрын
@@agtjackbauer It's directly comparing the prices of the vtx's as if most pilots have the liberty of choosing which vtx they buy. A walksnail pilot cannot just get an o3 cause they need goggles. And same for me as a dji pilot. It does make sense for analogue pilots who haven't bought digital yet as they can make their decision before they've bought into one of the systems.
@definingslawek4731 Жыл бұрын
@@matthewbradley8971 Why not? They did it on the v1 system. Does the o3 block third party cameras?
@agtjackbauer Жыл бұрын
@Defining Slawek It's for all pilots. All it is is information. It's up to the individual to decide what the information means to them.
@bluegradientfpv Жыл бұрын
You’re a wizard. How did you do this in 1 day??
@ChrisRosser Жыл бұрын
It was a long one!
@BeyondGravityFPV Жыл бұрын
The only thing going for this new system is low light performance imho.
@doccock100 Жыл бұрын
gyro on camera is nice
@BeyondGravityFPV Жыл бұрын
@@doccock100 indeed it is but then you need a very good picture quality video to match that otherwise it might be useless. It's mainly used to stabilise cinematic material. O3 is almost there but not as good as naked gopro.
@ferocious_r Жыл бұрын
Hi @Chris Rosser, a few months before you did this video, you had kzbin.info/www/bejne/aJzSnKx_pd-CjLMfeature=shared&t=587 which included HDZero. Now another half year has passed. I wonder if you might do one more of these fancy 4-way day light / twilight / low light comparisons again, using DJI O3, WS V2 Pro, HDZ's Micro V2 cam and perhaps something like the RunCam Night Eagle 3? Would love to see these side-by-side!
@Stefan_73 Жыл бұрын
There is a bad compromise wrt image quality in all of these systems: Pilot needs VS DVR footage. For the latter you want realistic colors, low noise etc. For the pilot you want rather something like a Runcam Phoenix image appearance. High, even artifical contrast, edge enhancement etc. Look at the night footage of the O3 vs Avatar. Nobody wants to use such a noisy image for video. Maybe use eg 10-12bit cameras to create a pilot and a DVR Version of the footage. Or go away with this claim to have DVRs replacing action cameras. I see both companies on a doomed pathway to do 2in1 without the needed cameras and processing.
@AirKhanFPV Жыл бұрын
It looks like the big brother does it still better!
@dronoweloty Жыл бұрын
Avatar swept everything
@flaparoundfpv8632 Жыл бұрын
Watch out, DJI! Your clone company continues to exist!
@slappomatthew Жыл бұрын
all things considered, avatar is the new king. I like HDZ but their IQ isnt there yet. O3 is great accept its dji and F dji so that leaves avatar. it used to kinda suck but its gotten way better, its cheaper, and they really do listen and improve their system constantly. this new lineup is killer. 20x20 and 4:3 are MASSIVE. 20x20 opens up almost any frame for bolt in install and 4:3 means awesome image for people with VRX on older 4:3 goggles like myself.
@tombusby2333 Жыл бұрын
May be cheaper but then I need another set of goggles too...