Best step by step tutorial for NR200P MAX for far on YT. Certainly I will come back here once I start building the system.
@matercheff2 ай бұрын
How did the build go ?
@dominic.h.33632 жыл бұрын
Being able to pull off the PCI backplate to be able to install the GPU more easily is absolutely genius. If I could just finally make piece with case designs that don't allow you to see your CPU/RAM and GPU at the same time for maximum eye candy, this case would be a definite contender.
@ChristopherFlannigan2 жыл бұрын
Agreed. If you only have limited space this is perfect
@Sander91S Жыл бұрын
Thanks for the great video! Made a build using the NR200P Max following the video and it works great. Got frightened a bit when it didn't power on but fortunately it was the PSU 0/1 switch on the inside of the case :)
@fsxspen Жыл бұрын
It got me too.
@ryanpalmer5728 Жыл бұрын
Thanks for this. I'm teaching my 9 year old how to build a PC tomorrow and I bought this case, but wanted to watch a walkthrough before showing him what to do. We're cramming an i9-13900KS and PNY 4090 into ours. Super excited!
@user-ds6ki9zi3o2 жыл бұрын
Does not surprise me....another excellent build and review Christopher!!! Well done!! Can't wait for the i5 12600 review!!
@joseamilcar80833 ай бұрын
This guide helped me so much , it was my first pc build but with am5 system so I was reading manuals and following with you , thank you so much man
@Geezimac2 жыл бұрын
I noticed you placed the bottom Fans as intake. Have you tried them as exhaust, top as exhaust. You have air pushing back into the GPU heat sink that is trying to draw its warm air out .
@donmelendez8224 Жыл бұрын
Thank you for a very thorough build video! I just bought this case and similar components. You explained everything very well so that there's really no question as to what needs to be done and how to do it. Thanks again!
@dunstondiaz2 жыл бұрын
As always enjoying watching your videos. No bullshit! Straight to the point!
@captainlcm Жыл бұрын
I'm gonna build according to this video. Thank you for another detailed and easy to follow walkthrough!
@luvnpayton Жыл бұрын
you can put a 140mm chromax in the bottom with one of the slim 120's as well. i added a commander pro to mine too mounted in the front panel.
@freddiemccombie18 Жыл бұрын
I followed this for my build and it was a great help. Cheers 🍻
@flobotron Жыл бұрын
Great help and very easy to follow.
@ChristopherFlannigan11 ай бұрын
Glad it helped
@edgarssults69762 жыл бұрын
Thank you so much for the guide! The documentation didn't mention the fan cable in the back that you have to pull through. Couldn't understand why my fans weren't working.
@olliewilliams43252 ай бұрын
Really helpful, thank you!
@quindeman1879 Жыл бұрын
Great build. Convinced me that this will be my next build.
@munjdiez87822 жыл бұрын
Great build! Solid fan here from the Philippines.
@franciscoaloi576911 ай бұрын
Thanks a lot! It was a huge help for my build :)
@CF542 Жыл бұрын
Thank you for showing the CPU fan wiring. The poorly written manual does not even show that connector and I missed it during install because it was buried behind a wiring bundle.
@fsxspen Жыл бұрын
Same for me.
@valeriomandova66258 ай бұрын
HI. I mounted the same fan model as shown in the video. The cold air comes out at the bottom. It's normal?
@andrest20026 ай бұрын
I think you might have mounted the fans upside down. I will be building this exact case and i think i will do research with one fan as intake and the other as exhaust. My theory is it the fans will allow a more circular air flow. Intake fan pushing cold air into the gpu while also pushing air past it, around the case, and having the second fan “exhaust” push the remaining hot air outside. Not sure how this will work but i dont plan on using the glass panel so i might not use fans to avoid the fan noise
@AR-ke8wg2 жыл бұрын
Bottom fans as exhaust is the ticket. Might even be able to put 25mm fans as exhaust down below.
@ChristopherFlannigan2 жыл бұрын
Not sure about that, as the hot air will be blowing down over the desk and up into your face (have tired something similar before in another case). Also the fans were too loud for my liking.
@Mars0572 жыл бұрын
You always want your exhaust to be higher up, in this case at the top of the case. Thermodynamics state that heat rises, I think I'll listen to that haha.
@JoHo_2 жыл бұрын
@@Mars057 when using the perforated panel, the gpu gets side intake and blows air both up and down, so having bottom exhaust helps taking the hot air from the gpu away. (That's the theory behind it tho, I haven't seen relative testing results yet)
@salsashreenee68872 жыл бұрын
@@JoHo_ Optimum Tech did bottom and top exhausts with the steel panel.
@fraub1 Жыл бұрын
Absolutely not... Heat rises. Having your heat exhaust down will cause a lot of it to be sucked back into the machine and exhausted again. Have the bottom fans as intake, moving cool air from the bottom into the case, to be exhausted out the top.
@alejandroavila26462 жыл бұрын
Cooler master only had to move up the GPU slot 4mm to allow for full-size fans at the bottom. That would have improved your numbers. I can't find a logical reason for them not to do it.
@Editnamehere2 жыл бұрын
Would do wonders.
@dann5480 Жыл бұрын
great video, great advice. thanks. you helped me out a lot.
@SteremyJeele Жыл бұрын
Hey Chris, not sure if you have this build still kicking around, but I'd be interested to see how the thermals would fare with your two bottom fans set for exhaust rather than intake. In theory, the bottom exhaust would help to pull the hot air from the GPU heatsink, and increase negative pressure, which would in turn pull more cool air through the vented side panel. I'd guess this would be a fairly significant difference in temps, but theory vs practice can definitely surprise us. I'm thinking about picking up this case for a 12700k/3090 build soon, and I'd be interested to know if that setup would produce significantly better temps than a setup with no bottom fans.
@toadster1 Жыл бұрын
100% agreed, bottom exhaust all the way with vented side panel!
@MBpotato89 Жыл бұрын
Did you ever try it out in exhaust configuration?
@SteremyJeele Жыл бұрын
@@MBpotato89 Yep, that's how I've been running it since I built it, going strong 3 or 4 months now. GPU temps are great, CPU temps leave a bit to be desired, but a more aggressive fan curve on the radiator-mounted fans keep temps healthy at the expense of a bit of noise. Generally under gaming loads I'm seeing GPU temps around 56-64c, CPU temps in the mid 70's or lower. Some particularly CPU intensive games can pull that to 78-ish, but I've got the fans set to kick on to 100% there, so it doesn't exceed 80c except for very brief spikes before the fans pick up.
@Blafard6662 жыл бұрын
Another good one ... Even tho I still don't get why people choose to go through the ordeal of installing their system in such tiny, clustered cases, you did a good job at answering most of my questions concerning this particular one...
@davefool68152 жыл бұрын
The same reason I want to build in a small case... lack of space. I still have yet to build one after watching all these vids
@thetechrealist2 жыл бұрын
Us young people love small things. And it's definitely interesting to see what you can fit in such a small space!
@davefool68152 жыл бұрын
@@thetechrealist I am an old git ... But if it counts I managed to stick a micro machine in my ear hole when I was 5 years old
@hunterburguillo58912 жыл бұрын
I'm currently building a SFF PC. SF helped me a ton with his TU 150 build. Especially on the parts list and fan header part. That case is pretty rare where I live, but love the idea of how you can carry it like a suitcase. Basically a somewhat "portable" build if you don't to use a laptop and want to upgrade when the time arrives. Just hoping the darn thing posts but still deciding if I should go Linux or spectre with a "key".
@ChristopherFlannigan2 жыл бұрын
Limited space for some, other just like it
@kensg Жыл бұрын
Nice build..love the case 🎉
@mohamedzeddini44462 жыл бұрын
Nice detailed review, thank you very much 😊
@SparWiz_Khalifa Жыл бұрын
Why dont set the fans on the bottom to exhaust?? to me that makes a lot more sense, so the heat of the GPU gets exhausted partially at the bottom and not pushed through the cooling grill of the AiO. Can someone correct me if im wrong or confirm that its better to set the fans to exhaust? ill build my nr200max tomorrow as my dan a4 h2o is troublesome in terms of thermals btw, excellent build and content by you, Christopher! merry christmas to y'all!
@fsxspen Жыл бұрын
My Bottom fans exhaust, saw one guy report he had a few degrees lower.
@andrest20026 ай бұрын
@@fsxspenthinking about testing out one fan as intake and one as exhaust. My theory is the air flow would be more of a circle, intake will push air up and around the case, while the exhaust will just push that air out. Not sure though dont want excessive noise so i might not run any
@anigame89167 ай бұрын
why gpu looks hanging
@mineralisk2 жыл бұрын
Thanks for making the video.
@juliuspalttala2 ай бұрын
Hi! I'm wondering, if 17mm thin chassis fans are thin enough for the bottom? The 15mm ones are really expensive here in finland. Thanks!
@risboricbu91599 ай бұрын
Great content. Love the accent😊
@terrytjandra5 ай бұрын
how can you get those temp? i use intel 13700k. just installed thermalight cpu frame. it does drop abit. on average i got 50c. on cinebench it throttled to 100c. do you know the fix?
@gio-gv9mo2 жыл бұрын
What kind of splitter cable would I need if I wanted RGB fans ?
@user-uf9zl8dj9o2 жыл бұрын
Nice video sir , very informative.👍 I have a question, did you ground yourself while building this pc?
@vladNMP2 жыл бұрын
you just made me buy one!
@guille92h2 жыл бұрын
Great review.
@Absolyim Жыл бұрын
Hei I got the NR200p Max long with an Aorus x570 i pro wifi which has a CPU_ FAN and only one SYS_FAN.. NO particular AIO_ FAN header.. can I plug the pump in the sys_fan? I read online that some people switch the cables and plug the pump in the cpu_fan ?!
@Yuehan_2 жыл бұрын
Is it bad if you try using the noctuas under the gpu as exhaust?
@laguzzzzz Жыл бұрын
hi, tell me I have the NR200p max and for motherboard a gigabyte b550I aorus pro ax I want to know where to plug the cable of the AIO CPU ???
@blindman8093 Жыл бұрын
i hope you make update video for this case with a build of i5 13600k and 4070ti
@iluvmoney12312 жыл бұрын
Was looking forward to a stress test
@shayelbaz8302 жыл бұрын
is the nr200p will hold a 3080ti aorus master and 12700K ? with or without OC ? the stock 240mm liq cooler can hold this cpu ? and this rig ? can it fit? and does the 850W will hold this ?
@spanishjohn420 Жыл бұрын
which motherboard should i use for this case and ddr4 ram in 2022?
@richardsracingmad Жыл бұрын
Hi Chris, I am a total newbie with a question. Would a WiFi Card fit in this case build, if I bought a MB without wi fi? I live off grid, so rely on wi fi, but I would wish to upgrade it when wi fi 7 comes out. The alternative is, if I bought a MB with wi fi, would I be able to upgrade the wi fi? Many thanks Chris
@norbertgudek6274 Жыл бұрын
Hi, excellent video, very detailed. I have a question regarding new rtx 4000. I am planning on building a pc using nr200p max case. I have noticed that new rtx 4000 series cards are using 3 or even 4 separate 8 pin PCIE cables. If I am not mistaken, the case comes with only 2. As I am a begginer in PC world, could you please explain me how it works and how can I safely install rtx 4080 in this case ? Is it even possible ?
@codykonior Жыл бұрын
You know where the coolant pipes go into the CPU block, do you think can they be rotated / swivelled to a different position?
@flowless17736 ай бұрын
can i use a ryzen 7 5800x istead of your cpu ?
@peterl84172 жыл бұрын
I have a 3700X system with the same motherboard as yours. I don't like the temps that you got from the NR200P MAX. It seems it is suffering from the hot exhaust of the GPU be it horizontal or vertical mounted.
@ChristopherFlannigan2 жыл бұрын
It's the AIDA64 test - temps will never get near this with normal use
@peterl84172 жыл бұрын
Your ambient must be ideal, however, my ambient is 34C as I don't use AC with my NCase M1 V5 with CPU temps hitting 90C. I was eyeing the NR200P MAX as a fix for my issue but I have changed my mind thanks to your reviews. I have chosen to go for a high air flow case which is a bit larger than the NR200.
@F4B10_80 Жыл бұрын
Which 4000 series card is space compatible today?
@fsxspen Жыл бұрын
My bottom fans are quiet and set for exhaust.
@mmadevgame Жыл бұрын
Computer doesnt boot with the same specs but am5 motherboard
@LMMS_99 Жыл бұрын
are there intel 12th gen brackets included to attach the cooler?
@GutoGerbase Жыл бұрын
Maaaaan, i thought that you would test with the top fans as intake and the bottom as exhaust
@frogissober2 жыл бұрын
Does the pc perform well? I would like to build it.
@xAdi420 Жыл бұрын
I have jst built my pc in this case and im getting 65 dB on idle? Can someone help me please? I have adjusted my fan curves so i suppose its the pump?
@spike1786 ай бұрын
Sounds bit noisy then, noise is a worry with this build and heat.
@talisay2342 жыл бұрын
When is this gonna be available? US region,
@Junga1234 Жыл бұрын
Did you need to buy the double fan splitter cable for the bottom fans?
@Max-nm2qc Жыл бұрын
yes
@Fren332 жыл бұрын
This case is fantastic but in Canada it's not available at all anymore. Is there a comparable Case with the same SFF and included AIO/PSU out there?
@iloveu1ube Жыл бұрын
NZXT H1 V2
@activate-motivation Жыл бұрын
The screws are confusing you did not show us the screw neither no one else
@zachsivankeo67212 жыл бұрын
Is it okay to only use 2 pcie 8 pin connectors for your gpu power even though your gpu has 3 ports?
@little_fluffy_clouds5 ай бұрын
If you want to install a 4080/4090, Cooler Master sells a 90 degree 12VHPWR cable that is compatible with this PSU. Highly recommended.
@pb88372 жыл бұрын
Great video, 11:44 Where the frontpanel plugs allready bundled in sort of a G-connector type plug ?
@little_fluffy_clouds5 ай бұрын
Yes, although it’s removable.
@Captain-Chats2 жыл бұрын
i love this case but the colour is the only sticking point for me
@romainr87042 жыл бұрын
Be carefull, I have one and the PSU has a loud coil whine, that ruins everything ...
@vinhdx Жыл бұрын
I've just bought this Nr200P Max, and use ASUS Rog strix B660i mainboard. Can you advise how to change the AIO fan flow direction? Is there a way to change using software? As default, my AIO fan is set as intake. I want to change it to exhaust. Thank you so much!
@MiguelRodriguez-my3dg11 ай бұрын
You have to unscrew fans and flip em over lol
@spike1786 ай бұрын
@@MiguelRodriguez-my3dg 😂 so easy.
@Adriano-Italiano2 жыл бұрын
What thermal paste does it come with, should I use a better one
@little_fluffy_clouds5 ай бұрын
The case comes with a tube of Cooler Master’s thermal interface paste. You don’t need another paste unless you happen to have some in hand.
@mrb39912 жыл бұрын
HI , I just come a cross your video, Stillh have my lian mesh, but thinking of downgrading to this as i have a bad back and lian mesh is heavy, Wlll this case take my Rtx 3080 Gaming Z trio, the only Differnce between my version of card compared to the old X version, that mine now has a metal back plate, Hope it ftis , ? thanks
@matthewrezuke8130 Жыл бұрын
You can put a 4090 in this case
@Editnamehere2 жыл бұрын
I just finished my first custom loop in the nr200p. I have to say it’s my favorite case but my god the temps are terrible. Looking to switch to something else.
@MyKillyy2 жыл бұрын
What are the temps and have you switched by now?
@Editnamehere2 жыл бұрын
@@MyKillyy heyyo- I was determined to make it work so I added a slim 240 radiator to the top. Haven’t benchmarked but playing battlefield 2042 on ultra for 3-5 hours straight my 3080 stays around 65 and my 5600x stays around 70-75 with random spikes to 80.
@Editnamehere2 жыл бұрын
@@MyKillyy with one rad at the bottom cooling both 3080 and 5600x. The cpu would thermal throttle after 10 mins of gameplay and shut down the pc. While the gpu was around 75 with peaks at 80.
@alex-zh5yv2 жыл бұрын
are the included fans / PSU silent when PC is sitting idle in windows?
@little_fluffy_clouds5 ай бұрын
Yes. Mine are also silent under load because I tuned the fan curves. You may do so either in the BIOS or using the Fancontrol utility in Windows.
@fledora12172 жыл бұрын
Wow, 89c and 88c is very hot for the CPU. Any reason why?
@JoeMaranophotography Жыл бұрын
Its an aida64 30 minute stress test. Not representative of a real workload. It's designed as an absolute stress test on the cpu.
@vitogalante98748 ай бұрын
stupendo grazie
@jambazz2 жыл бұрын
There is something REALLY weird with your build if a AMD Ryzen 3700X can reach 93c in a 30 minute AIDA64 stress test in 20c ambient temps. This case has a 280mm AIO waterblock, and should be able to keep this particular CPU below 80c. With PBO enabled, the 3700X should max out at about 110 Watts, something this case and cooler should easily be able to keep cool. Would love to see temp and audio results with better application of thermal paste / with different fan speeds on the radiator Perhaps even the BIOS is giving the CPU too much juice?
@henrygg2952 жыл бұрын
It's a little late but he does stress cpu and gpu simultaneously, so the warm gpu heat rises along the cpu and into the radiator as well so in that case (no pun intended) the temps make perfect sense and aren't too shabby.
@spike1786 ай бұрын
Way too hot for me...
@GenericMedusa992 жыл бұрын
14:58 can u fix the fan splitter to the motherboard by just removing the riser cable after everything is assembled? cuz i have the same motherboard and i dont wanna go through trouble of removing the GPU again
@donkeysunited2 жыл бұрын
1:45 How come you got sent a European plug?
@dioxinvapor14952 жыл бұрын
Systemic Racism
@devindesmitais Жыл бұрын
hello raiser cable is gen 4 , motherboard and videocard is gen 5 , there will be performane issues ?
@JoeMaranophotography10 ай бұрын
No
@activate-motivation Жыл бұрын
There's like hundred spruce and they're all different size and people are struggling
@marciopereira17262 жыл бұрын
Amazing my bro... I love your videos... do you have email? I would like to contact you Christopher
@ChristopherFlannigan2 жыл бұрын
Thanks. the email is in the about page
@bobbymoss61602 жыл бұрын
Seems like the only people getting this case are reviewers or consumers living in Asia.
@MrXPS1976 Жыл бұрын
Why PC building is still the same? It should be by now like Lego pieces, without worrying about compatibility, sizes, cable management, etc. I know it is fun for a lot, but for others its a nightmare and ugly.
@extremelydave2 жыл бұрын
If you are going to install Windows 11 on this beast, be aware you will need to purchase a TPM module for it to install.
@eftheusempire2 жыл бұрын
I didnt even know new balance shirts existed. This may just be the whitest nerdiest dude on the planet.