Take Care When Plugging in USB 3.0 Cable - PC Building Tips for Beginners

[@ghallora]

The worst design port and cable in recent times.

[@xenoxia]

Micro USB

[@graywolf6192]

@@xenoxianah this is much worse.

[@dead-channel6842]

I think I have destroyed mine and now only one front usb works instead of two🥲

[@unnamed715]

Plugging it in: 😁👌 Unplugging it: So you've chosen death...👿

[@bighazdog]

HOW DO I GET IT OUT???

[@alexmaccity]

Dont buy cheap cases.

[@DaFirstMelon]

@@bighazdoggently angle it away from the ram slightly and VERY gently wiggle it and it should come out after a while.

[@mahdymagrabe3749]

Bro i almost break the motherboard when i tried to unplug it .... I just bought it yesterday and still didn't check if it works properly or not 💀

[@illestvillain1971]

​@@mahdymagrabe3749I put it in at such an awkward angle pressing against my GPU and it's impossible to remove without taking out a few other wires and the GPU... And it's the only cable I didn't neatly tuck away but hey, it's pressing up my GPU so it won't sag 😅

[@evergreenalba]

These simple tips are really informative! It's the little things like this we all needed to know as first time builders

[@Nurr0]

Terrible connector, can confirm it's easy to bend.

[@change477]

I broke 1 pin😢 then realized and fixed it Properly and thanks to god still working good

[@furkankaplan5088]

I broke my pins and saw this the next day

[@fgfhfgfgfr]

Same

[@Ainz586]

Same 😭

[@obifuntoknowme]

Same.

[@Brev-]

Me too

[@zc16jnunez]

One if my pins for that broke yesterday, is it unusable now?

[@FireAndIceTCP]

I bent the pin on the top right. Thankfully it’s possible to bend it back. I thought I ruined it and was gonna have to get a new case

[@fatasfeather7163]

You mean new motherboard?

[@FireAndIceTCP]

@@fatasfeather7163 no the pin I bent was on the plug in that was attached to the case lol

[@tubelesstrippin]

​@FireAndIceTCP lmao I damage the pin on my board but bent it back too, I js got a new mag b550 tomahawk max as an upgrade from my b450. This is a grueling process I gotta unbuild my pc rn. I was hoping to find a tip for routing and manging it cus for my case the usb cable is thick asl it has 2 cables together for the USB 3.0 cable it's so hard to manage I feel imma break it 💀

[@Tind911]

Dude your a life saver, thank you

[@egg_addict]

I'm not even a newbie, this connector is just actually awful. my board has a right angle connector, and the way my case is built means it's actually impossible for me to plug it in. horrible design.

[@dead-channel6842]

Same issue bruh Btw what setup do you use I have a loan Li 216 cabinet and a nzxt B650E

[@Pembroke.]

Great tip

[@robertcespedes1671]

What is it for lol I’ve looked everywhere and all it says is how to plug it in

[@geralt36]

Absolutely fucked up cable design. Unplugging it is next to impossible. Why can't they be as simple and low profile as the usb 2.0 connectors. The guy who came up with this connector should be fired.

[@MortalinaMortifera]

Also BE VERY CAREFUL when removing it, the CASING ITSELF COMES OFF IF YOU TAKE IT OUT

[@goodboy-zg3xo]

I had to push this one a bit harder. Question ist, when there is a bent pin, won't it work at all or will it work with issues?

[@zc16jnunez]

@@_Mintyz_he means if the motherboard will work

[@dead-channel6842]

My one usb type A got wrecked

[@CoarseLemon]

i pulled a pin out with that cord somehow lmfao

[@drewjukes5955]

If u break 1 pin will it still work?

[@zc16jnunez]

I’m wondering too

[@dead-channel6842]

Partially

[@TiburonBolo]

What motherboard is that???

[@8o4h10essohess6]

I just had to fix this cause my stuff wasn’t working….😑

[@charliefckinmarr1188]

Are those rams on CH2?

[@offwig]

yea, thats how you unlock the full speed of your ram if you're only using 2 sticks with 4 slots

[@IHaveBadWiFiBro]

WORST CONNECTOR EVER OH MY GOD

[@Nascream]

Too late for me, bent permanently :)

[@UluvlaZ]

Will it work if you broke one pin

[@EyeLxveJay]

No

[@Wreck_Crimes]

@@EyeLxveJayreally?

[@EyeLxveJay]

@@Wreck_Crimes yes, your usb ports (ON THE CASE) will not work, the only usb that will work on the case are the usbc the motherboard usb will be fine tho

[@Wreck_Crimes]

@@EyeLxveJay yay 😁 thank you 🙏

[@Wreck_Crimes]

I broke on pin 😢

[@MikeBob2023]

🙂👍⭐

[@brandonsends]

too late💀

[@cadandale5928]

nice trojan virus

[@tosayxxx]

Nonsense. That is the only was that USB can go inside

[@MikeBob2023]

Yeah, the cable connector does only go in one way (as Chris clearly stated in the video), but that fact doesn't preclude the possibility of damaging the pins in the socket while forcefully attempting to plug it in the wrong way

[@Blade43548]

That happened to me one time I bent the pins

[@iccchen1981]

My MB doesn't have the sidewalls around the connector which makes it very difficult to line up and I am afraid I would damage the pins ... so I left it unplugged haha ... 🥲

[@NolanODell]

does it still work without it

[@HashCollision]

@@NolanODell Of course, but you will be unable to utilize USB 3.0

[@ryuchiyawa2390]

That shit is hard to unplug

[@stonalisa3729]

I bent a pin doing this. It’s true

[@EyeLxveJay]

lol this just happened to me on my first time building a pc 😂😂😂😂😂 1.5k down the drain 😂😂😂😂😂😂😂😂. Edit: nevermind lol

[@Lucid130]

Ok but how do you keep the 3.2 gen 2 cable from falling out? The gen 1 cable was easy to install and so was the gen 2 but anytime I work on my pc the Gen 2 cable pops out of the header

[@vemprite5698]

Literally can’t get it out pcs are ass building my first and there is sooooo many problems that occur that aren’t my fault

[@polperez2474]

The whole mf plug came out when I unplugged it...

[@numptyboy1]

Now do a remove video :>

[@ThatOneOddGuy]

My corsair 5000 d case came with 90° adapter

[@RizzardGame]

I was trying to get it off and it came out with the plastic around the pins:) what should i do

[@RizzardGame]

I also have problem with my 24 pin its stuck

[@michaellance898]

Definitely the worst port known to man. I just destroyed that stray pin but hopefully it’s still works after straightening it out and plugging back in properly. 🤞

[@RicoP-bx1xi]

did it work? I just broke one pin only😭

[@fgfhfgfgfr]

​@@RicoP-bx1xi Same bro 😂

[@zc16jnunez]

@@RicoP-bx1xidid yours work? I broke one pin too