Chrome Trim Delete With Plasti Dip

[@SpendingJar]

What y'all think? Comment below and destroy that like button to show some love! Thanks for watching 🙏

[@benwallace8590]

Hey brother. How is it standing up to the average car wash. My experience with plasty dip is that it sprays off with high pressure car washes

[@SpendingJar]

@@benwallace8590 Hi, still holding up good. I pressure wash my car and its been fine. I need to do an update video. Thanks for watching 👍

[@hotrodramrod1080]

How long does it last?

[@SpendingJar]

@@hotrodramrod1080 I've had it on for a year and no issues so far. My guess is it can last years if taken care of. Hope this helps.

[@oumadkhalek573]

Do you have any recommendations on how to avoid clumping?

[@alphaelectricx6753]

Was going to pay $750 for a chrome delete but after watching this I feel like Plastidip is so much easier and cheaper. Legend 👌🏻

[@SpendingJar]

It's definitely worth trying for a few bucks. Mine's still holding up well. Best of luck with your project 👍

[@lorrluck]

@@SpendingJar even after a year? with rain and everything

[@SpendingJar]

@luck4772 Yes, and also, I have a short 1 year+ update video on my channel.

[@xavim6147]

@@SpendingJar when you wash it in that area, does it ever seem like it’s going to come off?

[@SpendingJar]

@xavim6147 so far no, it's holding on well

[@holdthewinds]

Thank you. My husband convinced me to do this to our car by showing me your video. However I had much anxiety watching you spray it over your paint and window... and my husband kept saying, "just keep watching".... lol. Great job! We're going to do it too.

[@SpendingJar]

Hi! Thank you for checking out my video. Not knowing what plastidip is and spraying it on paint is nerve-wracking. But like in the video, it comes right off if you make a mistake. I'll have a new video on plastidip/hyperdip here shortly for a different car. The quality of this video is a bit off since it was one of my earlier videos starting KZbin. Best of luck on your project! 👍

[@ndizzle8069]

I tried using vinyl tape on my 2016 Audi A4 and it looks absolutely awful.... I should have just did this in the first place.

[@Macky4941]

One day manufacturers will figure out chrome isn't cool anymore.

[@SpendingJar]

Haha right? Not sure if chrome is just cheaper or people like them more but I like the stealth clean look. Thanks for checking out the video!

[@Americafirst-i8q]

Chrome looks good on old restored muscle cars or old classics, on modern cars chrome does not look right

[@thatdudeinblackshoes]

Remember when it was an option? Lol 😆 now it's plastic home everything!!!

[@TEDSHOTTHAT]

Nah

[@antg208]

By the time they do, it’ll be cool again 🤣

[@L22R]

Felt confident doing this on my 2021 civic LX thanks to u. Now my car looks way better. Did this on the chrome part that’s over the fog light area too. Looks like it came factory that way 😍

[@SpendingJar]

That's awesome! It definitely makes it look better. Glad the video helped 👍

[@andrericks6553]

How long does it last?

[@fritzleboo]

I was thinking how long as well and also thinking about car washes. And bad winters.

[@L22R]

@@fritzleboo i dipped the wheels and sideskirts on my 2022 civic, and i been goin to the carwash like every week for a year on the wheels and months on the skirts. Blasting it with pressure too, they still look really good. Some parts of the wheels are peeling very slightly but u cant notice unless u look for it. For what it costs and the ease of effort to apply it, i love it.

[@TheAlexSeipel]

​@@L22R ty for your reply

[@mrvang8077]

Didn't think I be able to find those plastic dip paint, but today when I drop by one of the autozone parts store. They have both the gloss and black plastic dip paint in. It was the last 2 items left on the shelf, so I bought it and will be using it on my 2018 traverse emblem. Super helpful guide. Thank you!

[@supermodestmouse]

this is amazing. I was going to try to chrome delete with vinyl, but this look sSOOOOOO MUCH SIMPLER and better. i was really worried i'd screw up the paint on my car, but this looks like its not even remotely adhering to the paint! Thank you!

[@SpendingJar]

Thank you for checking out my video! My plastidip is still holding on with no issues. I need to do a 3 year update on it 😁 Best of luck on your project 👍

[@briankuhn7396]

Looks great! It’s interesting that the overspray just pealed away at the intended spots. I may need to try it now.

[@Anmolorb]

Man these are so good and helpful. I bought a new 2021 civic sedan and want to make small upgrades. Your channel has been helping lots. I hope you continue to put videos on your new mods and tutorials

[@SpendingJar]

Thank you so much! Glad my videos are helping. Congrats on your new ride, hope you enjoy it 👍

[@FL_Gal]

I can't wait! I'm doing gloss plasti dip. THIS IS GOING TO BE FUN!!

[@SpendingJar]

Awesome! Wish you the best of luck on it! I'll be testing out Hyperdip very soon on my other car. Thanks for watching my video 👍

[@LeroySmith-s6o]

Looking to do this on my 2020 accord, I noticed the shape of the chrome on the thumbnail and clicked so fast. Nice vid.

[@SpendingJar]

Thanks! Hope the video helps, and best of luck on your project 👍

[@glenndayz5865]

black out gives it a much cleaner look! I'll try this on my 2021 white civic hatchback ex! keep up the cool videos 🤌🏻

[@SpendingJar]

Yupppp, looks so much better. Best of luck on your blackout! 👍

[@JoJanDiezel]

I'm thinking to spray the B pillars of my car. Glad to hear it holds up well on chrome after 2 years, that's insane for such a cheap and easy fix.

[@SpendingJar]

Right? I wouldn't be surprised if this goes another 2 years with no issues.

[@JamesBond-fd9mj]

Finally I found way to remove that ugly chrome from my black Civic X sedan with front chrome grill. Thanks mate for great and cheap tip!!!

[@SpendingJar]

Glad the video helped. Best of luck on your project 👍

[@tamkepa]

Looks great. Thanks for leaving your "fail" in the video. I thought you'd have to peal it off and start again. I'm going to give it a go!

[@SpendingJar]

Thanks! Appreciate you checking out the video. It's still holding up great with no issues. Best of luck on yours! 👍

[@RevolveAuto]

I’ve gotta do this! Hate that random chrome trim on the car. Awesome video man!🤜🏻

[@SpendingJar]

Thanks always for the support and yea, I hate the chrome trim. Black out looks so much cleaner and sharp.

[@RevolveAuto]

@@SpendingJar yeah man, looking clean!

[@theblackprintcosmeticsco2773]

Thank you for this!!!! About to grab some plasti dip and do this on my 2017 jeep! I wish they’d stop putting chrome on cars especially on all black ones like mine. 🙏🏾

[@SpendingJar]

Very welcome! True that, not sure if chrome is just cheaper for manufacturers. Best of luck on your jeep! 👍

[@bradleach4947]

Just put new wheels on my civic and wanted to get rid off the chrome grill and emblem with black. This looks great! My girlfriend is being a negative Nancy about it though!

[@SpendingJar]

Thanks! Appreciate you checking out the video! Best of luck on your project! Hopefully your GF will like it once it's done 👍

[@johngregory4801]

I was looking at my Grand Marquis this morning, wondering how I could delete all of its chrome... And this vid came up in my feed. Thanks!

[@SpendingJar]

Thanks for checking out my video, hopefully it's helpful 👍 Good luck on your chrome delete.

[@testos2701]

Done a few applications with it and after a while it start peeling off, if you can paint it I think is a best long term solution.

[@lou_sassole]

looks really good. i wonder if it will hold up to my chrome deletes i professionally had done that keep coming undone?

[@SpendingJar]

Thanks! It's held up over a year with no issues so far. Hoping it'll last a few years.

[@joshuawilliams6996]

I should of gone this route instead of vinyl wrap I have so many bubbles! thanks for the great tips!

[@SpendingJar]

Hi, sorry to hear about the vinyl wrap. Best of luck on the plastidip project 👍 Happy New Years!

[@th3namesadam968]

my left ear loved the intro

[@saulgonzalez1349]

Hey im thinking of doing this to my car, I will 100% use this video as a tutorial on how to do it thank you so much! My only question has washing you car changed at all now with the plasti dip? And have you ever used a pressure wash to clean the car and has it effected the plasti dip?

[@SpendingJar]

Hey thanks for checking out the video. I've been pressure washing my car at home myself and had no issues. I'll try to make a 3 year update video.

[@J0hnnyp]

Looks awesome man!! Think I’m going to black out the chrome trip and then do it for my emblems and use glossifier for emblems

[@SpendingJar]

Thanks! Best of luck with your project 👍

[@slickest]

love it, thanks man im going to be blacking out my chrome grill trim on my 2011 chevy cruze

[@SpendingJar]

Appreciate you checking out the vid 👍 Best of luck on the grill trim 💯

[@Njliving22]

Can you please help me? I’m trying to get it off my car without damaging the paint? I used a heat gun and damaged my door handles, it’s been on the car for 5 years HElLP?

[@jesgetme]

I'm definitely about to try this. It looks good. I just got quoted $800 for a chrome delete

[@SpendingJar]

Whoa $800! Definitely worth trying out the plastidip first. Mine is still holding up strong and no issues. Thanks for checking out the video 👍

[@spankylocc4202]

That’s so stupid lol Just vinyl wrap it Truly super easy

[@87andsmith]

I was just quoted around 950 for window trim and some other larger chrome pieces. I'll try the dip first I think.

[@spankylocc4202]

That’s stupid it’s so easy to wrap all the trim with like 20 bucks worth of wrap

[@GaryKari]

Nice looking work... I'm planning some chrome delete-work on my cars next spring also. edit: That OEM chrome trim really looked akward going up there and not in the bottom as usually...

[@SpendingJar]

Thanks! Appreciate it! I 💯 agree, the chrome trim does not look good. Looks much cleaner blacked out. Best of luck on your car 👍

[@WL59628]

Awesome, how does the excess peel properly without breaking into the actual chrome delete area ? Do you razor blade to get it started

[@SpendingJar]

Hi! No razor blade. As long as there is an edge along where you spray, it'll peel/break off on that edge. I know it's weird, but that's how it peels off. Hopefully, this makes sense 😄

[@RickRijuanaPro]

Plasti Dip is crazy because I'm watching like why is this man spraying the car 😂😂

[@andreaf3269]

Ooh nice job. Now I want to try to chrome delete the front of my honda accord. It's red so I think black would look better than chrome.

[@SpendingJar]

Thank you! Appreciate you watching. Best of luck on your project with the chrome delete. I still need to chrome delete the front badge one of these days. Hopefully, sooner than later. I'll have a video out when I do.

[@OvaltineJenkanz]

The fact you just didn't do a better job taping it off blows my mind 🤣 Looks dope though! Been thinking about wrapping my chrome pieces, but I think I might try this first to see how it'll look.

[@SpendingJar]

😄 right? Didn't realize at the time out breezy it was... But glad it happen to show people its alright to mess up lol. For less than $10 its definitely worth trying. Plus its still holding up good like the day I sprayed it 👍 Best of luck on it!

[@TheFrankMedia]

Looks great! How does the dip hold up when you need to wash the car, with either a machinewash or pressurewasher?

[@SpendingJar]

Hi! It holds up great. I wash it with my pressure washer and no issues at all. I'll have a 1 year plastidip video update soon. I'll also be comparing the regular plastidip vs hyperdip in a future video.

[@ivnnrss387]

I remember when people with cadillacs would add chrome to the window trims

[@rickcarrasco6716]

Looks good but after a while, plastic dip starts to fade and look nasty, so how do you keep it looking good

[@md8744]

Thank you. So we have to tap away around the chrome about 1. Inch!!

[@SpendingJar]

Very welcome and thank you for watching! Appreciate the support 👍 Yes you need some space around the chrome trim so you can peel off the excess plastidip.

[@willyb507]

Looks good! Did you peel up also on the seal, against the chrome piece?

[@metaldreams3595]

Bro you did this and you didn't tell people how to tape the trim around the window there's certain ways to do it

[@MikeDeeKickz518]

Why not just tape it off correctly? You were already there taping it and masking.

[@lowmedia1153]

Hello, thank you for this video. I want to chrome delete my sportage 2023. I wanted to know, is this black matt ? thank you

[@SpendingJar]

Hi and thanks for checking out my video! It has a little shine to it but yes I would lean toward more matt than gloss. Hope this helps 👍

[@matthewmartin1716]

Looks epic. Going to try de chrome my merc next week with this product.

[@jerz732]

Just did this after watching your video! Much respect

[@SpendingJar]

Thank you! Glad it helped 👍

[@aussie8114]

Gives me something to think about. My new CX-5 might be seeing some plasti dip on it now.

[@SpendingJar]

Congrats on the new CX-5! Best of luck on your plastidip project 👍

[@cmac9710]

Looks good... Saved yourself a gang of money!

[@SpendingJar]

Thank you! Appreciate you watching! Have a Happy New Year!

[@karlooropesa4070]

can u spray glossy paint or clear coat after the plastic dip to make it more shiny?

[@SpendingJar]

@@karlooropesa4070 plastidip does sell a glossifier spray if you want it to make it shiny. Here is a link to Amazon if you want to know what it looks like. amzn.to/4e5O2i4

[@JimyOfficial]

How much spray bottles you think I’ll need for 2 door car?

[@SpendingJar]

I used 1 bottle to spray my 4 door Civic, plus emblems, badge and still had about I'd say 1/4 bottle left. So 1 bottle should be enough.

[@JimyOfficial]

@@SpendingJar dam didn’t know it’s so much in the body! thanks Man

[@SpendingJar]

@JimyOfficial 👍 good luck on your project, appreciate checking out my video.

[@thetruth00]

Would this stuff last on touch surfaces like door handles?

[@SpendingJar]

Haven't tried door handles but my guess would be no. It'll only take 1 passenger who doesn't know its plastidip to pull to hard or a finger nail to pull on it and peel is my guess.

[@DomHefner]

How many cans did you need for your whole window trim. And no sanding required just spray and go???

[@SpendingJar]

1 can was more than enough. No sanding, just wiped it clean and spray.

[@Violetmoon370z]

Would you recommend doing this with plastidip or using black tape for the window trims? Which one would be easier for such a large area?

[@SpendingJar]

Never thought about doing black tape, although I guess that'll be similar to wrapping it with vinyl. I haven't wrapped any of my trims so I can't give you an exact answer. But my guess is wrap or tape would be less time consuming vs plastidip. But plastidip would be cheaper to do. That's why I went with plastidip. Also I would wrap it with car vinyl vs just a regular black tape, if you decide to wrap it. Hope this helps.

[@alluvz2fish]

Curious to know if you lightly sanded the chrome so the paint holds better? Also, how long with this last?

[@SpendingJar]

@alluvz2fish hi and thanks for checking out the video. No sanding at all and it's still on my Civic to this day. My guess is if you take care of it (no machine car wash), it can last a long time.

[@brians2711]

When you're peeling the Plasti Dip off the car and off the window how does it stay on the chrome trim? Is there something that you're applying to the window shield and the car paint first?

[@nimanourikalajahi7941]

How about car wash..? Is this thing waterproof?

[@SpendingJar]

I hand wash it at home, not sure how it'll handle car wash machine. It's been in the rain plenty of times, no issues. I have an old video of me pressure washing it on my channel if you want to see it.

[@ianplummer]

Looks amazing but when you peel off the excess, why doesn't the chrome covering come off as well or do you need to run a blade round the edge to get a clean line?

[@SpendingJar]

Thanks! No blade, as long as there is an edge, the plastidip will cut along that edge when you peel. Hopefully that made sense.

[@robertybarra3980]

Looks great I love you don't have to be exact where the tape and it peels off. Is there any trouble going through car washes? U got a new sub I have a 21 Accord

[@emma_001]

Love this!!! ❤️❤️❤️ Great video! I wanted to know if you could do one on the window panel n how to paint!

[@SpendingJar]

Thank you for checking out the video! Appreciate he support! I'm not sure which window panel your referring too but the steps should be very similar. Clean, mask, spray, and peel :)

[@brucelesss3601]

how does the plasti dip hold up to car washes? would it stay in one piece if i went to a car wash?

[@SpendingJar]

I guess it depends on what car wash you take it to, but I believe it's not recommended for machine car washes. I never tried it. I hand wash with a pressure washer and had no issues.

[@corrinjessen]

Awesome video! Definitely going to try this on my Fusion Sport. I’m curious.. what’s the color of your civic? I’m literally in love with the color!

[@SpendingJar]

Thank you! The color is Sonic Gray Pearl. Best of luck on your Fusion Sport!

[@victorpirsoul3979]

Looks good. Will it come off when you wash the car?

[@SpendingJar]

I've been pressure washing it at home and it hasn't come off. I'm not sure how it be through a mechanical car wash. Hand wash should be okay or touch less wash.

[@DaBoiZee3]

Is one can enough to cover emblems and the trim? Thanks!

[@SpendingJar]

Hi and thanks for checking out the video. The plastidip can I used was left over from spraying my emblems. So for me it was enough, I guess it'll depend on how much you'll be spraying. Best of luck on yours 👍

[@DaBoiZee3]

@@SpendingJar Thank you for your quick reply!

[@mje1625]

Love the color of your Civic!

[@SpendingJar]

Thank you! Appreciate you checking out my video 👍

[@teopendic748]

After two years did you washed out that plastidip or is still holding on chrome? Thanks for great video!

[@SpendingJar]

Still holding. So far, no issues. Thanks for watching 👍

[@Minyuun]

do you think 1 can would be enough for both sides, and the front? (I have the 2016 Civic & it has Chrome in the front that I hate)

[@SpendingJar]

Hi! The can I used for the side was the same can I sprayed my back emblems. I still have some plastidip left even after spraying. So I think 1 can should be enough.

[@VillaAlegreKaty]

Thank you for such great content sir! I’ll be doing this to my 2022 camry. It might be bit challenging coz the chrome is all the way around the windows. How is yours holding up now that it’s more than a year? How is the weather in your area? It gets really hot here in texas and rains can get crazy too. How is plastidip different from hyperdip? What kind of tape did you use and where did you get them from including the wipes? I hope you can find time to respond. I just got quoted 300 bucks for my camry so this is a much better option.

[@SpendingJar]

Sorry for the late response, I was out of reach over the weekend. Mine is holding up well so far. I pressure wash my car at home with no issues. Weather here in CA can get hot, and the past few months, we've been getting lots of rain and cold weather, but no problem. As far as plastidip vs hyperdip. Hyperdip is a separate company that's similar to plastidip but with their own formula. They do provide way more color options and finishes in one. I used painter tape that I got from homedpot, and the lens wipes was, I think, from Costco. For fraction of the price, I think it's worth trying out. A few hours of your time, 1 bottle of plastidip or hyperdip and other materials is still way cheaper than $300. Hope this helps and best of luck on your project 👍

[@VillaAlegreKaty]

@@SpendingJar It does help my good Sir! Thank you for your reply. I appreciate it. I enjoy your vids. New subscriber here!

[@tqsuited]

Looks great! I am planning to do the same thing on my Civic. Just one question, why not put the tape right along the chrome edges so there is no excess to peel off after? Or does it look better if you have the excess that just peels off exactly at the edges?

[@SpendingJar]

Thanks! You want to leave a little room to peel off and have a clean cut when peeling. If it's too close, it might peel the chrome part of the plastidip with it. Good luck on your Civic 👍 Hope it turns out great!

[@tqsuited]

@@SpendingJar I'm gonna be honest, it did not work out well. I did the badges, they came out well and still holding up, but I tried doing the chrome window trim a couple of times.. never came out well. Big waste of time and cans of spray. I cleaned it all off and just went with black wrap sticker cut-outs (ordered online), which came out better. I would've preferred the plastidip method but just glad to black it out eventually.

[@SpendingJar]

@tqsuited sorry to hear that. Glad atleast the badages came out good. I'm gonna hyperdip/plastidip my audi badages soon since the weather is starting to warm up. I'll have a video on it. Again, glad it all worked out at the end of ya 👍

[@firasathahmed2047]

Awesome video. Did you give 15 mins between each spray? Is it the same for hyperdip?

[@SpendingJar]

Thanks! It's been awhile but I mention the time in the videos. But mainly I guess it'll depend on what your climate is right now, humid vs dry. I do have a few cans of Hyperdip I was to try out on my other emblems. I'm waiting till the weather improves. I'll have a video out on Hyperdip asap. Thanks for watching!

[@eastsydegov2583]

Looks great bro. Do you think a window visor would an issue with the plasti dip?

[@SpendingJar]

Thanks! I haven't installed a window visor over plasti-dip but my guess is, it won't hold well over time. You can install the visor as normal and plasti-dip the part that still shows chrome. Thanks for watching 👍

[@incubus9000]

Awesome video, I’m thinking of doing this and the emblems soon on my 2018 ex Real question though, how long does it last? I wash my car myself most of the time but should I try to avoid the car wash places?

[@SpendingJar]

Thanks man! I appreciate you checking out my video. It should last for awhile if not maybe even few years if its taken care of. If you wash it yourself should be no problem since you know its plastidipped. I avoid automatic car washes in general because of swirls.

[@javierflores5291]

Nice, actually headed to my driveway to blackout the chrome on my car now 👍

[@SpendingJar]

@@javierflores5291 Sweet! Hope it turns out great. Best of luck! 👍

[@chrisrussellca]

Hey did you dip those wheels? Are they 16” or 17”. I have the same wheels with 16” and thinking of making them dark grey like yours, they’re silver now.

[@SpendingJar]

Hi, these are factory black 17" rims. I did not plastidip them. I've seen people plastidip or hyperdip them. I'm gonna hyperdip my other badages to compare soon. Hyperdip is another company like plastidip but with more color and finishes. I bought piano black gloss hyperdip to try out. I'll have a video on them, it's getting warm enough to spray here.

[@chrisrussellca]

@@SpendingJar I’m currently dipping the trim on my 23’ Civic EX. Alittle messy but seems hood so far, unfortunately the weather here is about 50c and windy

[@SpendingJar]

@csrussell21231 nice! Best of luck on your project and congrats on your new Civic 👍

[@EyyRev]

Thank you for this I’m gonna do it on my k5 and the Kia logos 🤙

[@SpendingJar]

Nice! Best of luck on your project and thanks for watching!

[@josephcoleman57]

Wait what you just spray it on and peel it off and cuts out the letters all by itself? This is great

[@SpendingJar]

Hi and thanks for checking out the video. Yea, once the prep is done, just spray and peel. If you mess up, peel it all off and start again. Gotta love plastidip 👍

[@jeshawnpaul4778]

Chrome is still nice.....it just depends on the car and the look you're going for

[@SpendingJar]

For sure 👍

[@jeffs6090]

No need for an exacto knife? It just peels off right where it needs to? How does it know?

[@SpendingJar]

No knife is needed. If there are any edges/groves where the plastidip is covered, it'll cut off along that edge/groves. Hope that makes sense. I have another badge I want to Hyperdip/Plastidip, I'll try to show/explain it in that future video. Thanks for watching 👍

[@JeffRoth-w3c]

Looks good does it last though or will come off after awhile

[@SpendingJar]

Mine is still on with no issues. Take care of it, and it'll last for a while.

[@llretro686]

can u go thru a car wash after this proses

[@SpendingJar]

I haven't tried, I pressure wash the car at home. But it's been holding up well so far.

[@llretro686]

@@SpendingJar And you only used one bottle?

[@SpendingJar]

Yes one can and had some plastidip left over.

[@deeoosee]

For the love of God. Make sure that you have ALL DAY to do this and limit distractions. Make sure your wife and kids are out doing something for the day. This takes preparation and time to do it right.

[@gordonellisjr331]

I purchased some vinyl wrap to cover the chrome trim. I tried installing it and didn't have the results I was looking for. I wasn't too crazy about having a sharp razor blade anywhere near my paint. Not to mention I really didn't like how it was sticking in place. I was thinking it was a little too cold the day I tried doing it. After watching this video and others using the Plasti dip product I think I am going to give it a try. Question: Why didn't you mask up to the rubber seal around the trim? Seems like a waste of the product to me.

[@SpendingJar]

Hey thanks for checking out the video. I left the plastidip on the rubber seal. You can mask it off and peel it or leave it on like I did. I figure it be easier to peel the paint side on top and the window side below the seal. Best of luck on your project, hopefully the video helps, and it comes out great 👍

[@Bigtimeclip]

hi amazing video, i was wondering if it would work on mags to black them out

[@view13s8]

Hey bro if you had a chance to do this over again would you of used a clear coat ?

[@SpendingJar]

Hi and probably not. The plastidip as is has been holding up well. I need to do an update video on it... it's been a year after spraying. Hope this helps 👍

[@danbell3378]

After the painting is finished, can I go back with a clear coat for shine?

[@SpendingJar]

Hi, plastidip does sell a glossifer you can apply for shine. Hope this helps and thanks for checking out my video 👍

[@davidbrownproperties2824]

How does it hold up to car washes?

[@SpendingJar]

Hi! I wash my cars at home with a pressure washer and so far no issues... Not sure about automatic car wash places.

[@mikhail1695]

What about water? Heavy rain, car wash. How water resistant is plastidip?

[@SpendingJar]

It's very resistant from what I can tell. I've had it over a year and it's still holding on strong with no issues. Car wash, I pressure wash it myself at home and again no problems. I'm not sure how it'll handle an automatic car wash since I haven't tried yet. Hope this helps and thanks for checking out the video 👍

[@SpendingJar]

Here's my 1 year+ plastidip video if you want to check it out. It's very short less than 2 min watch. kzbin.info/www/bejne/bXOVdIynq9qKjJY

[@fatboy1993v]

Hi there, great job, just wanted to ask if you wash the car does the plasti dip come off?

[@SpendingJar]

Hi and thank you! No, it stays on my from experience. I have a video on my channel washing the plastidrip with a pressure washer if you want to check it out. Thanks for the support 👍

[@stansbruv3169]

Love it bruv! Looks sharp.

[@aloosh7277]

Idk why Honda even put chrome on these. That being said 😆 great job. Love the look, wrapping ours with Vinyl this weekend hoping for decent weather. We did dip our emblems and they came out great!

[@SpendingJar]

I know right? Maybe chrome is cheaper to make? 😆 Best of luck on the project. Blacking it out is definitely the way to go. Thanks for checking out the video! 👍

[@Mrwinecontreras]

How many cans will I need to do my rims 20 inches?? Also how many cans for the trims?? Thanks a lot

[@SpendingJar]

Good question on the rims, I haven't plastidip my rims before so not sure. If you google "Dipyourcar", they sell wheel kits, it's like plastidip (hyperdip is their verison). For trim, 1 can is more than enough. I bought Hyperdip for my other emblems but haven't installed it yet. I'll have a video up on it once I do. Hope this helps.

[@Mrwinecontreras]

@@SpendingJar thanks a lot !!! I will be waiting on your next video , I saved your video for when it’s time to do my trim and emblems I just go and review your video lol , will be doing it next weekend!!!

[@shaclo1512]

Did it shrink over the years?

[@SpendingJar]

Has not shrink. I need to make a 3 year update on it. Thanks for watching.

[@VeegovonDOOM]

I have a question. The door trim is fading on my honda accord, will this work on that too? I was thinking of killing two birds with one stone while I was doing my chrome trim delete.

[@StreetDrivenDaily]

I wrapped mine....and i dont like it, not a fan of it. May have to dip it like you did.

[@SpendingJar]

Sorry to hear that. Try out plastidip, its reversible and so far it's been holding up good. I bought some hyperdip I want to try out on my other emblems. Hope to drop that video some time soon.

[@yariilamami553]

Would it come out? If I go to the car wash. That’s my concern

[@SpendingJar]

I pressure wash my car at home and have not taken to a car wash. I'm guessing machine car wash has a higher chance vs hand car wash. Hopefully someone that has might share their experience.

[@PkersDemise]

Hows it holding up now?

[@SpendingJar]

@PkersDemise still holding strong. I need to make an update video soon on it. Thanks for checking out my video.

[@PMMichael]

Looks awesome, great job!

[@faroscivic]

Will it be damaged when washed by high pressure water?

[@SpendingJar]

Hi and thanks for checking out my video. I've been pressure washing my civic myself the past year and so far no issues with the plastidip. I wouldn't take it to an automatic carwash. I need to make a follow up video since its been a year and many have been asking. I'll have one up soon. Thanks again!

[@LilA-cn5oh]

How is a good time to wait for the next coat and to peel it off?

[@SpendingJar]

I guess it depends on what your climate is. If it's humid, I would wait a bit longer between sprays vs if its a dry area. I think 15-30mins. For peel off I let mine sit I think 30 mins. It's been a long time, but I mention all the spray and peel time in my video. Thanks for checking it out!

[@stzzyseb]

Can you do this to your rims?

[@SpendingJar]

@stzzyseb there are products out there for rims. For example, Dipyourcar has a product line called hyperdip for rims. It's like plastidip. I haven't used their product yet so I can't tell you from experience how good or bad they are.

[@stzzyseb]

@@SpendingJar nice ok. I bought a 2016 Honda civic black and want to get rid of the ugly chrome.

[@randomstuff53078]

nothing stuck in the door jams when you opened the door?

[@SpendingJar]

I had peeled off all the excess off and wiped clean any residue. As far as I can remember, nothing was stuck in the jams.

[@chubb813]

Looks great! I'm sold

[@SpendingJar]

Hi! Best of luck on your project. Mine is still holding up good. Appreciate you checking out my video 👍

[@JimyOfficial]

Do you peel right after the 5th spray?

[@SpendingJar]

After the last spray, wait for it to dry and then peel. Hope this helps and best of luck on your project 👍

[@nathanholmes3125]

How many cans did it take please?

[@SpendingJar]

I used 1 can and still had left over

[@goducgo]

Looks good. I’m doing mine. Is that satin black?

[@SpendingJar]

Thanks! I would say it has a satin-ish finish. Its definitely not glossy. They do sell a separate spray can if ya wanted to make it glossy. Best of luck on yours! 👍