CHRYSLER DODGE JEEP RAM VW ROUTAN NEW OR USED WIRELESS IGNITION MODULE PROGRAMMING

[@robynlargent7204]

Excellent. Your video assisted in my win replacement; however, the supplied keys would not learn. Thankfully the original key learned successfully to my 2010 Ram DJ 2500.

[@pauldavis8716]

Outstanding video this helps me a lot man. I can now instruct my technician how to proceed to use his own tools to program my module and keys. Blessings my brother

[@juanluisrojas9400]

Thanks!

[@heaveymelt]

Johnsons dealer in ontario canada charged me almost 1800 to replace win and program everthing and new key

[@cirilknez1715]

Good work. On Liberty 2007 i need program used immo module, will be posible to learning --use original old car key ??? Thanks for answer.

[@MrLuwitin]

Great info. Can you use a used ignition module?

[@huyug1]

Yes

[@alanboyce9745]

I have never been able to use used on 2008 to 2010. The vin won't rewrite. Also even the used you can program he has missed steps. This process only works on new modules.

[@hybrid_V_usa]

I used the alfaobd program and accidentally activated the “elv replaced” function, now the car won’t start and is looking for the elv module, which the Chrysler Town Country 2011 doesn’t seem to have. Is it possible to register tpm again when there is no module?

[@sixfoot919]

I purchased a win module from a junkyard and keys from Amazon I've run into a similar issue but the problem still exists I cannot start my car I could use a solution.

[@larrycanlas7656]

What is the model of your scanner?

[@cryptokingluis]

How much is the system you have for me to program my 2009 3.8lt VW Routan

[@malikabekkairi7808]

I have same problem with my car and I’m trying to fix it can you help me please

[@partoems9376]

Thanks for sharing. Will this procedure work for 2017 Jeep?

[@alanboyce9745]

I haven't tried that new yet but it probably would work with new. Why do you think your WIN is bad?

[@iskooobydoo]

Can you get the PIN code if you don't have access to the original WIN module anymore? The replacement is a new module. Someone said you can set your own PIN if its new. How do you do that with the IM608?

[@MacAutoDiag]

Dealer only

[@geovanybasave8706]

So can you put a win module used on the car or you have a to put a new one

[@huyug1]

In some cases you can put used one and clear and program it to the new car. Other is opening module,reading MCU, and transferring it to the donor one.

[@geovanybasave8706]

Whit vvdi right

[@huyug1]

@@geovanybasave8706 VVDI is just one of the tools. Autel as well can do it.

[@novawagon559]

Where did they happen to get there new module from im looking for 1 my self

[@huyug1]

Dealer

[@JawadKhan-hz9sc]

Dorman makes them now . vw has an updated win modules about half the price as molar.

[@louie4224]

Can this be used for a 2010 Dodge ram 1500? the dealerships keeps saying they cant be done

[@huyug1]

Yes! It will work with any fobik key system on Chrysler vehicles. I’m not sure why would dealer tell you that because I have done the same truck couple days ago.

[@alanboyce9745]

Witech won't do used....

[@alanboyce9745]

@@huyug1 The first gen 08 to 10 are different..... They can be reused with tools other the 608. But I have never gotten the 608 to reprogram an 08 to 10 which is probably best anyways cause of the recall. You would need to be very careful to make sure the recall was done on your donor vehicle or you will likely be violating the law. The 11 plus can be reprogramed with my im608 I have done it many times but if you follow this video it will never work. This is only the process for new.

[@huyug1]

@@alanboyce9745 recall is about the module itself which is new from dealer which has an updated software. Yes, if you know how to use the 608 you can code and program used and new ones. For all fobik WCMs.

[@huyug1]

Can you pls share with us the law you are mentioning ?

[@terrybacon5998]

We have a VW Routan that the original key cannot be recognized by the module so we have no pass code to transfer to the new module to program the new keys. What do you suggest?

[@huyug1]

Depends on if you are using a new or used module.

[@segounlocks5029]

If it's new you make the code yourself

[@alanboyce9745]

Used a unprogrammed key to turn on the module it will allow you to pull the pin.

[@segounlocks5029]

@@alanboyce9745 true

[@alanboyce9745]

@@segounlocks5029 The guy in this video does not know what he is talking about. Used and new program two different ways and there are many the autel will not do used.

[@novawagon559]

And how come you didnt want to reprogram original fobrik to new module?

[@Locksmith.71]

Because they are locked to the old module.