Chrysler Town & Country Oil Cooler and Oil Filter Housing Replacement Part 2 THE FIX!! 0 Oil Leak

in this video I'm gonna share with you how to remove and replace an oil cooler on a Chrysler Town and Country, This is Part 2 of a 2 Part Video! Enjoy! #oilcooler #chrysler #oilleak

[@connellpaytes8119]

Thanks again for these videos. It's nice to watch somebody take their time and very careful through the process. Instead of rushing to get it done.

[@KITS_Auto_and_Truck_Repair]

@connellpaytes8119 My Pleasure! Thanks

[@jamesmatticks70]

Did it yesterday. Never attempted this level of repair maintenance prior, but with all the tutorials available on the internet it was a non-event, except for the brittle & warped connectors! Thanks for y’all’s help!!!

[@KITS_Auto_and_Truck_Repair]

@jamesmatticks70 My Pleasure! I'm glad to hear that the video was helpful!

[@scotthancock6764]

Outstanding!! Well lit, good camera work, excellent explanations. I thought I was in school to become a mechanic. Very professional. Thank you so much.

[@KITS_Auto_and_Truck_Repair]

@scotthancock6764 My Pleasure! Thanks

[@Joe-ue1wh]

Because of your two step video tutorial I feel confident taking on this project and saving the labor cost thanks

[@KITS_Auto_and_Truck_Repair]

@Joe-ue1wh My Pleasure! I'm glad to hear that the video was helpful!

[@kelvin6391]

Extremely nice work You are doing. I see how you naturally have trained Yourself to double check the connections as You go. Your calm as You work, proving Your confidence as a mechanic. 5+Star

[@KITS_Auto_and_Truck_Repair]

@kelvin6391 Thank you! I appreciate it!

[@TomDembeck]

This is one of the BEST auto repair tutorials I've ever seen. Keep up the wonderful work!

[@KITS_Auto_and_Truck_Repair]

@TomDembeck Thank you!

[@jamesdisbrow2157]

Thank you for explaining what you were doing. I am not mechanically inclined, and you made it easy to understand. I have to get this done to my 2012 Chrysler Town and Country van and now I have an understanding of what they are going to do. Thank you again. God bless.

[@KITS_Auto_and_Truck_Repair]

@jamesdisbrow2157 My Pleasure! Thank you!

[@bryansanders2741]

Definitely one of the best tutorials available. Very professional.

[@KITS_Auto_and_Truck_Repair]

@bryansanders2741 Thank you!

[@wardedward]

Great video! Getting ready to do this on my 2011 Town & Country. My failure of the part showed up as a coolant leak from there. Only one thing I can see you missed was bleeding the air out of the cooling system at the thermostat housing after you added the coolant. I did enjoy the attention to detail of your video and explanations as you went along the process. Thanks!

[@KITS_Auto_and_Truck_Repair]

@wardedward My Pleasure!

[@MusicMinisterJP7]

Thank you sir, for very well and concise step by step explanation and procedure. In my case, I will be just replacing all the o-rings, seals throughout the procedure. Don't see the need to replace a working oil block/cooler.

[@KITS_Auto_and_Truck_Repair]

@MusicMinisterJP7 My Pleasure!

[@MusicMinisterJP7]

Can I ask, what type video cam did you use for these videos? Brand and model, please..

[@KITS_Auto_and_Truck_Repair]

@@MusicMinisterJP7 Sure! I used the Sony 4K Handycam 16.6 mega pixels

[@MusicMinisterJP7]

@@KITS_Auto_and_Truck_Repair ohh, I thought it was a head worn cam..

[@stephaniefleming7931]

@@KITS_Auto_and_Truck_Repair how do i know if it is the cooler or just the gasket

[@jamesmatticks70]

Excellent tutorial, my friend! I’m attacking this fix on my son’s 2016 in a very few days. Wish me luck!

[@KITS_Auto_and_Truck_Repair]

@jamesmatticks70 TThanks and Good Luck wiith your project!

[@willfuentes8960]

Beautiful video Well explained I’m about to do the exact same thing to my 2015!!!

[@KITS_Auto_and_Truck_Repair]

@willfuentes8960 Thanks!

[@FactsMattersUSA]

I watch many how-to videos and I must say this is by far the best I have ever seen. Precise, to the point, specs. Brillant. I am definitely a subscriber and can't wait to see your next work of art. Thank you.

[@KITS_Auto_and_Truck_Repair]

@GIMinspection TThank you! and welcome to our youtube community!

[@Mr.XYZ6775]

I have a 2016 town and country. I was leaking oil. Repair shop said the oil cooler was most likely cracked. They said it was a common flaw with this type of engine. Is this true of the oil cooler housing cracking? About 3 months later I had to hard accelerate to avoid an accident. Then I found oil spots were I park. I'm thinking the vibration of the engine from the hard acceleration is causing the oil to leak from the O-rings. No more leaks from regular driving now. What are your thoughts.

[@KITS_Auto_and_Truck_Repair]

@Mr.XYZ6775 it's usually the O-rings that leak

[@samuellockejr3442]

Excellent job ! Awesome video, nice detail ! 😀

[@KITS_Auto_and_Truck_Repair]

@samuellockejr3442 Thank you!

[@erickahowland3689]

I learn a lot first time

[@KITS_Auto_and_Truck_Repair]

@erickahowland3689 Thank you!

[@AllenIsbell]

Excellent videos, my friend. I'm looking forward to the next time one of my cars breaks down so I can come back for more! :D

[@KITS_Auto_and_Truck_Repair]

@AllenIsbell Thank you!

[@AllenIsbell]

@@KITS_Auto_and_Truck_Repair So when I was torquing down the upper intake manifold bolts, the lower intake manifold cracked. I couldn't figure out what happened until I went to install the old upper intake manifold on the new lower intake manifold. I forgot to put the studs on the upper intake manifold in the brackets that are hiding under the upper radiator hose. The studs were sitting on top of the brackets, which had the upper intake manifold misaligned, causing the lower intake manifold to break. Hopefully my $300 mistake helps someone else.

[@joemomma1608]

This guy is a great mechanic....this saved me lots of time. That vehicle and motor is garbage though....buy a Toyota and avoid these headaches.

[@KITS_Auto_and_Truck_Repair]

@joemomma1608 Lol!! Thanks

[@robertqman5751]

Throughout the video I wondered if you would check to be sure that a filter was in that housing ... 👍 .. I have a Chrysler 300 with a 3.6 and haven't had to do this .. yet .. lol

[@KITS_Auto_and_Truck_Repair]

@robertqman5751 I'm glad I did! Lol!!

[@frankskeen1310]

Great video and very useful to me and many others I am sure.

[@KITS_Auto_and_Truck_Repair]

@frankskeen1310 Thank you!

[@KevinReinartz]

Fantastic follow up to pay one. I only have one critique, when you are torquing the boys it looks like you are over tightening them when you double check the torque. There should be no turning after the click. It likely won't be an issue in this instance, but could come back to bite you one day. Keep up the good work and thank you for sharing!

[@KITS_Auto_and_Truck_Repair]

@KevinReinartz My Pleasure! Thanks

[@JoshJohnson-e3i]

Would love an AC compressor video too!

[@KITS_Auto_and_Truck_Repair]

@user-si4lo8kg4u I have it on my playlist!

[@joeybeckham9459]

Next thing I have to do and this video was excellent!

[@KITS_Auto_and_Truck_Repair]

@joeybeckham9459 Thanks!

[@jerbstv4623]

Thanks for the video, do i need to drain the coolant and the engine oil first ?

[@KITS_Auto_and_Truck_Repair]

@jerbstv4623 Yes!

[@thaddavis9795]

Thank you for all your help!!

[@KITS_Auto_and_Truck_Repair]

@thaddavis9795 My Pleasure!

[@kevinarmknecht1075]

Great video! Very detailed.

[@KITS_Auto_and_Truck_Repair]

@kevinarmknecht1075 Thanks!

[@FordTorino70]

Excellent work!

[@KITS_Auto_and_Truck_Repair]

@FordTorino70 Thank you!

[@charlyreyesolivares197]

good job master 👍👍🙏🙏

[@KITS_Auto_and_Truck_Repair]

@charlyreyesolivares197 Thank you!

[@seatime674]

Doing this on my '18 Pacifica soon, is it best to drain the coolant first so it doesnt flood the valley so you dont have to change the oil??👍👍

[@KITS_Auto_and_Truck_Repair]

@seatime674 YES! Draining the coolant helps!

[@seatime674]

​@@KITS_Auto_and_Truck_RepairYes I will drain the coolant first, when you transfer the temp sensor to the new one should you use like a high temp Permatex thread sealer?

[@19211265]

Great job! How much charge for labor cost?

[@KITS_Auto_and_Truck_Repair]

@19211265 Thanks! send me an email and I will send you a quote for this job!!

[@DuaneDonaldson]

Do you know if any aftermarket all-metal filter cooler assy also comes with a filter and sensors attached? Thanks for the full tutorial.

[@KITS_Auto_and_Truck_Repair]

@DuaneDonaldson My Pleasure! No I don't!

[@DuaneDonaldson]

Looks like DORMAN is made by SK, it comes with sensors, he did not show the filter b@@KITS_Auto_and_Truck_Repair

[@DuaneDonaldson]

Looks like dont buy this part number?? kzbin.info/www/bejne/qpeopJpjr62hh68 as its all disassembled??@@KITS_Auto_and_Truck_Repair

[@realone411]

I bought an aftermarket cooler and I'm inclined to put RTV silicone around the edges of the cooler gasket rings to prevent leaking. The RTV is rated at 650 degrees. Would that be ok if its a thin layer?

[@KITS_Auto_and_Truck_Repair]

@realone411 No! you don't need to put RTV on the Cooler gasket

[@ChanceMaurin]

Very nice work, I just wish you would have gave me tips to clean and prep for new parts . Wasn’t sure how to go about. But thanks again for your guidance.

[@JoshJohnson-e3i]

Is the torquing just making sure it’s tight all the way. I didn’t really understand your conversion part.

[@KITS_Auto_and_Truck_Repair]

@user-si4lo8kg4u No! you have to make sure the bolts are torqued to the right spec!!

[@bugzie-a1769]

Awesome, thank you

[@KITS_Auto_and_Truck_Repair]

@bugzie-a1769 My Pleasure!

[@imoralesrojano8107]

Thanks you are the best

[@KITS_Auto_and_Truck_Repair]

@imoralesrojano8107 My Pleasure! Thanks

[@ahmedalhajiri6702]

Good job sir thank you so much that is good help

[@KITS_Auto_and_Truck_Repair]

@ahmedalhajiri6702 My Pleasure!

[@smartman123]

great video man

[@KITS_Auto_and_Truck_Repair]

@smartman123 Thank you!

[@r.k.867]

We had our Oil Cooler and Oil Filter Housing replaced by a shop on our 2011 Town and Country, Right after replacement the engine light came on and a knock sensor code is coming up, Any idea what could have caused this? There were no codes thrown and the engine light was not on before this repair was made.

[@KITS_Auto_and_Truck_Repair]

@r.k.867 the Knock sensor or it's wiring got damaged in the process!

[@Nick-bp7jf]

Hi. Sorry for going off at a tangent. Is there an issue with your OM642 high pressure fuel pump video?

[@KITS_Auto_and_Truck_Repair]

@Nick-bp7jf We took down that video because there was a big part missing in it! we will upload it again soon!

[@Nick-bp7jf]

@@KITS_Auto_and_Truck_Repair That is good news, i will look forward to seeing it.

[@KITS_Auto_and_Truck_Repair]

@@Nick-bp7jf Stay tuned!

[@DWS1023]

Good job!

[@KITS_Auto_and_Truck_Repair]

@DWS1023 Thank you!

[@sergioolague2845]

Who sells the best oil cooling housing? I'm about to do this in the next couple of days

[@KITS_Auto_and_Truck_Repair]

@sergioolague2845 get it from the dealer!

[@isaiaslivemusica8788]

good video mate

[@KITS_Auto_and_Truck_Repair]

@isaiaslivemusica8788 Thank you!

[@MarkLandis-m6w]

How much should this repair cost? Parts and Labor?

[@KITS_Auto_and_Truck_Repair]

@user-jz6hw2dj5h send me an email at [e-mail] and send you a quote!

[@RashidShakeel-f6e]

I want to replace manuf and it's gasket because oil leakage brother gi how much expense I like your work I live 39 fernbrook Mount Holly westemton nj pl help me

[@KITS_Auto_and_Truck_Repair]

@user-te3hx7vv6x Hi! send me an email at [e-mail] for an estimate!

[@kelvin6391]

Thanks!

[@KITS_Auto_and_Truck_Repair]

@kelvin6391 Thank you for donating to the channel I appreciate it!

[@amiramohammed23]

You got a whole lot of antifreeze down onto the compressor by overflowing it. The compressor will go bad in about a year now. But I did this same job yesterday on my own car the same way you did. Only difference was I used a doorman aluminum oil housing assembly and not the cheap plastic one from dealer.

[@amiramohammed23]

Nice job by the way

[@KITS_Auto_and_Truck_Repair]

@amiramohammed23 Good!

[@bozzyham]

I torqued to 106 inch pound and the screw snapped 😢😢😢 had to pull it out with pliers slowly, I am not sure what happened...

[@KITS_Auto_and_Truck_Repair]

@bozzyham do you have a good torque wrench?

[@DependableAutoTruck]

why didn't you replace with the new improved aluminum one

[@KITS_Auto_and_Truck_Repair]

@DependableAutoTruck I prefer the original version!

[@rdavid7965]

Should I assume when you say inch pound on the torque wrench, that's the same as foot pound.

[@KITS_Auto_and_Truck_Repair]

@rdavid7965 No! it's inch pounds

[@mikephillips5541]

Should have used an all aluminum one

[@KITS_Auto_and_Truck_Repair]

you can! yes

[@mikekizer]

why can't you just replace the bad O-rings on the cooler?

[@KITS_Auto_and_Truck_Repair]

@mikekizer you could! but I wanted to replace the whole thing!