Chute Blocker for Your Mower Part 1: Ferris ISX 800, IS 600, IS700, IS2100, IS3200

#mower #chuteblocker #lawncare
This is part 1 of 3 on how to build a super low cost (cheap) Chute Blocker / Cover for your lawn mower, zero turn, Ferris. This build was done on a 61 inch Ferris ISX 800. Parts I used are:
23x8 16g sheet metal, Two steel L brakets, a rivets, and spray paint.
This build was inspired by a build I saw on KZbin. I have modified mine to fit my needs. I hope you find this useful and it helps you build your own.
In Part 2 I will show you how I built my opener so I can open and close it when I am mowing.
Chute Blocker for Your Mower Part 2: Ferris ISX 800, IS 600, IS700, IS2100, IS3200 • Chute Blocker for Your...
HOW TO BUILD A CHUTE BLOCKER FOR YOUR MOWER PART 3: Super Nice Handle Build Ferris ISX 800 Zero Turn • HOW TO BUILD A CHUTE B...
Thanks for watching.
Buy the equipment I use:
GoPro Hero4 Black:
GoPro Session 5: amzn.to/2LcUdI4
GoPro 3Way Grip: amzn.to/2LrauID
Apple Lightning to SD Card reader: amzn.to/2A1OVdf
iPhone: amzn.to/2NBOWWY
SP Connect Case: amzn.to/2uIW2SK
AirPods: amzn.to/2Ljnf8H
Ravelli Tripod: amzn.to/2LKromq
GoPro TriPod Adapter: amzn.to/2n1kF8O
GoPro headstrap mount: amzn.to/2AzUSON
How the Amazon links help my channel out:
runbikemike.wordpress.com/201...
If you have any questions you want to ask me about the video please leave me a comment.
Follow me @:
Instagram: @runbikemike
Twitter: @Run_Bike_Mike
Facebook: / runbikemike-4264627311...
Strava: / strava
Zwift: RunBikeMike
Wordpress: runbikemike.wordpress.com Equipment I use:
GoPro Hero4 Black: amzn.to/2KiMTHE
GoPro 3Way Grip: amzn.to/2VGSJYV
Apple Lightning to SD Card reader: amzn.to/2xCpMW6
SP Connect Case: amzn.to/2RTGk2w
ZOMEI Tripod: amzn.to/34OIuWq
GoPro TriPod Adapter: amzn.to/3eI9jQX

[@RunBikeMike]

Make sure you check out part 2 of this video. I am planning on a part 3 this coming Spring. Part 2: kzbin.info/www/bejne/o4fJqn2JlrKKZ6s

[@TerrellWillams]

I’m liking it! I’m going to watch the part two!

[@secondhandchoppers2175]

Great work!! Thank you.

[@tonydize3944]

You’re awesome man great job love it

[@SaviorUnkind]

I made one of these a few years ago to mulch leaves. I used a 2x6" and some lag bolts right through the existing holes. Took like 10 mins.

[@alskinner2007]

Excellent👍

[@tonyslawncare]

Looks awesome!!

[@kahlerslawncare4923]

Looks good!!

[@thomasfreeman9814]

Great job and neat

[@kevinhuffman1031]

Great job & thanks so much... I now have a new project...

[@goutdoorservice9639]

Came across this video trying to see if I can make a flap for my mower Z1 Pretty easy and simple and not very expensive Thank you for making the time to make a video like this

[@RunBikeMike]

You are very welcome. Check out Part 3 for the handle build. Part 2 is a handle build but Part 3 had the better handle build. Have fun building your chute blocker, I know I had a blast making this one. I also have a video out there where I made this for my Dad’s Zero turn. It is one of my more recent videos you might check that one out too.

[@RamTrucks590]

Great job. Exactly what I need to do. I called Farris dealer and they said there out of stock and no information about when they would be available again. Wasn't happy about that.

[@Helpinghandslawnmowing]

Awesome video. I would’ve liked to see you cut with it at the end. Nice job

[@Jordan-jx6zc]

Thx , great video

[@timmyers3428]

I loved your scientific term "Whacked the hell out of it"

[@FiveStarLawnCare]

Nice video bro

[@RunBikeMike]

Thanks 😊

[@jeffwhite8017]

You saved alot of money by making one lol

[@jakemarek5925]

This is genius ! Use the grass flap on my ariens and should do this with my is700. How’s it holding up now ?

[@crosscutofficial]

I like the design, my only suggestion would be to reverse those bolts, sticking up looks unsafe.

[@ssg0wait85]

I would have loved to see this in action Sir.

[@RunBikeMike]

In part two I do use my mower. Showing it being raised and lowered while mowing. I should have that video out next weekend.

[@ssg0wait85]

RunBikeMike sweet. This is Cade btw 😂 this account isn’t ban from chat

[@Amunn21]

Do you know what size L brackets you used? Thanks!

[@dan4580]

Awesome video dude! I am going to make this. I just have standard blades. Do you need to have mulching blades in order to get mulching action with the shoot down?

[@RunBikeMike]

I just use standard blades on my setup.

[@armandomartinez6718]

I bought one before I discovered your video. My question is would you know why I get a lot of discharge through the front of the deck? First time I used it covered the deck. I don’t have mulching blades just regular ones. Don’t know how to correct the front discharge.

[@RunBikeMike]

I have heard that can be a problem. I don’t get a lot of discharge from the one I made but there is a little. If you can find a way to make the seal at the top of the deck and the opener more tight I would think that would help.

[@armandomartinez6718]

RunBikeMike I’ll try that

[@michaelmartt8899]

The one that you can buy doesn't come all the way around the front like the one he has made

[@rgarri6396]

I want to know if it keeps the operator cleaner.? I hate it when wind blows grass all over me and machine.

[@RunBikeMike]

It helps a lot but it is not 100% perfect. I use it mainly for that exact reason.

[@RunBikeMike]

It helps a lot but it is not 100% perfect. I use it mainly for that exact reason.

[@dannyheiple7469]

If the leaves are heavy..you will get a blizzard of dust!! Less dust if the leaves are slightly damp.

[@97JoMiller]

2 years later, any issues? I bought the mulching kit for my is700z but just bolts on so I cannot lift it so I think I'll be making this.

[@RunBikeMike]

It works well. I found I don’t use it was much as I thought I would but it is nice when needed.

[@97JoMiller]

@@RunBikeMike I have a feeling that I will use it quite a bit probably in one setting or the other. My yard seems to always be a bit "damp" for the lack of a better term and it seems like my mulching mower just does a better job of dealing with the clumps but there will be times when I'll need to open the chute because it will just be too much for the mower to handle.

[@quincyshears4473]

Where did you purchase the metal plate?

[@RunBikeMike]

I got it at Lowe’s

[@drewd6083]

Where do you buy a piece of the sheet metal?

[@RunBikeMike]

That sheet you can get at Lowe’s.

[@adangutierrez4382]

Link to watch part 2 and 3 ?? Please

[@RunBikeMike]

They are in this playlist. Build Time kzbin.info/aero/PLALZVHdIBx9-wjLUTxPfkPWLSShD-PLfY

[@EATATROLL]

Playing with fire. It's a $150.00 fine in my area if the police see you operating WITHOUT factory chute in place. Little girl lost an eye few years ago. Several large businesses afraid of being sued over who they hire will not let you mow outside of manufacturers guards in place.

[@RunBikeMike]

Wow really where is this?

[@ramblin_man23]

Gotta be up north

[@rossflorence7392]

One quick thing. The dealer will want the rubber chute not modified on trade or sell.

[@jeanniebarth4016]

Can you make me one for the same deck

[@RunBikeMike]

I am sorry but I can’t. The amount of time I have to spend on making them is not worth the amount I could charge. But if you decide to make one and you have questions please let me know.

[@michaelburch3494]

Can you make me one. I'll pay for it.

[@jakegibson6096]

That looks factory just about