TRANSPARENT CYLINDER 2 STROKE SIMSON ENGINE TUNING

[@alanshill4347]

Wow brilliant work , I'm 51 and I wish we had teachers and teaching like that when I was a kid. Great work fellas

[@AnonMedic]

At Wyotech my instructors used CGI 3d models, and for transmissions we had a cutaway case so you could see in inside of the T56

[@alanshill4347]

@@AnonMedic that's cool man but I was at school in the 70s/80s. Wish we had that then 👍👍👍

[@zxggwrt]

Fantastic!

[@homeopathy_777]

kzbin.info/www/bejne/Z3eTZpRrjKt5e9E

[@pornthiwapangzii2788]

@@AnonMedic;!ึบ

[@smallbee1234]

I have never seen a side view of a piston engine in action. I bet you made a lot of mechanical engineers stare in awe of this build. Good job!

[@ihavetwofaces]

If you're looking for more stuff like this, mechanical engineer Destin of Smarter Every Day has a video with a transparent cylinder head: kzbin.info/www/bejne/rpfPimiriJKhpNk (there's an even longer video with more behind the scenes on his second channel (kzbin.info/www/bejne/ep6vdZmtm6ane5o)). He also made a transparent carburetor: kzbin.info/www/bejne/qqC5l6mInbyVoJo which is fascinating it its own right.

[@jlo13800]

Now that’s some good old gashed elbow hand CNC machining.

[@rajatbisht21]

I am a mechanical engineer and I fully confirm this.

[@4ekaHyTbIj]

Чтобы для вас это не было дикостью необходимо читать умные книги с содержанием устройства двигателя внутреннего сгорания. И тогда для вас все процессы будут понятны. Останется только включить воображение

[@gallardo420s]

Pretty cool. Definitely a high speed camera is needed to really see the true working of a 2t. It be cool to have the expansion chamber on it too and see the pulse wave come back and push the unburnt fuel back into the cylinder. Good job guys! Pretty freakin cool!

[@WarpedYT]

Exactly how I was going to do it but never got around to it!!! GREAT JOB !!!!

[@ToyotaKTM]

It looked like the carb. was tilted too much. It might have run better if he had raised the front wheel or lowered the float level. Having no expansion chamber didn't help either. I'd love to see revision A.

[@lalaasa9579]

في الفصول زراعة الخضر

[@lalaasa9579]

🚴

[@tristengerhardt6748]

still would like to see you do this since you have better camera and slow mo

[@Stank-b8w]

@@ToyotaKTM I think it’s more with the expansion chamber, that’s what keep the fuel/air charge from going right out the exhaust

[@SprocketN]

My parents bought me one of these bikes (new) for my 16th birthday. It managed 42 mph, down hill with the wind behind it, which was faster than most of my friend’s bikes. It was supposed to be limited to 30 mph, but I don’t think Simpson bothered to restrict it. I never consider trying to tune it to go faster. You have put a lot of work into yours 😀

[@miketee2444]

The patience and skill it takes to hard machine those Xfers without scrapping the entire piece gets my respect. Poly isn't cheap either. Good job.

[@saifulnashriq22]

fuck slot.fuck gambling.fuck that huge

[@MrJasenstewart97]

@@saifulnashriq22 someone's mad, should watch your heart cause that's a lot of sodium in your system

[@rob5343]

thats acrylic :)

[@AaAa-nm1jj]

Замечательно. Было бы здорово сделать рабочий вариант . Ночная поездка вызывала бы восторг.

[@mishakostinn]

согласен

[@maciejsn2126]

Gratulacje Chłopaki !! Lubue patrzeć na niemożliwe

[@SkyWax_TV]

Wszystko jest całkiem możliwe, główne pragnienie)))

[@czekus5]

cylinder z plastiku??? pojebało ich? przecież to się stopi!!!

[@andreinechaev2955]

Hello guys! Even my 70 years old mom was delighted when I show her your video:)) especially with the transparent part of an engine. You are awesome, please continue doing what you do.

[@studiodrive-w9j]

Допоки Simson плыне - Польска не згине! Супер видео, большое спасибо! Мы все росли на таких мопедах в 80х и 90х.

[@werkstatt.73]

Genau das wollte ich schon immer mal sehen, vielen lieben Dank für diese tolle Arbeit! Respekt 👍

[@busbart1958]

Absolut 👌

[@AtomBobbus]

Als Simson Fan geht mir direkt das Herz auf.

[@malcrandall1309]

Gentlemen, congratulations! What awesome engineering! Huge respect from the UK.

[@johnmcquillan733]

Interesting experiment! I was thinking perhaps the rings would shave the bore in seconds even before the heat got to it! Happy and a bit surprised it lasted as long as it did, though it got more difficult to start each time from the lowering compression. Great idea, well done💥😃👍

[@quartusbuys6831]

Very interesting and logical comment.

[@2t-moto-jc223]

👍👍💯

[@dozerfarms]

The fact you went through the time to build this all by hand basically is amazing enough

[@terrynicewonger5434]

You Guys have So many hours into making this Possible..I have a lot of Respect for That…. I appreciate your Effort It’s Awesome to Watch!

[@nickburchfield329]

The fact that thing runs is actually impressive to me

[@craigd123]

Man has walked on the moon dude

[@motododo4626]

This is awesome I love being able to see the workings if an engine.

[@Pyrolucian.__67]

Too

[@trevormurphy7041]

Spectacular job reminding me of those see-through 3-D puzzles there’s got to be a way to make a complete motor out of bulletproof glass you’re halfway there

[@billlindamood3243]

If you guys had done this 40 years ago, you would have saved me a lot of time that I spent ripping into my poor Suzuki 90 to see what made it tick instead of doing homework. Maybe then my grades would have been better, and then...Naw! I loved every minute of it. Great job on the video!

[@ronaldbertin9455]

Super great effort, a lot of new people might now understand how a 2 stroke functions

[@ПетрРябошапка-ц2з]

Давно хотел посмотреть такое!Большая благодарность Вам за это,порадовали.Успехов во всем!

[@FazoRacing]

That some steady hand porting..SALUTE

[@ban1facy]

Круто смотрится) Неустойчиво работает из-за отсутствия глушителя(резонатора). Для 2-тактника важно.

[@сэйсэн]

А то что мотор пластиковый так это ерунда конечно😅

[@Gandalf-inventor]

Это не пластик, это орг.стекло. Оно может выдерживать приличные температуры, но тут, конечно, охлаждение не помешает.

[@zidanivan]

@@Gandalf-inventor жидкостное охлаждение будет в тему: как раз можно будет увидеть принцип работы системы охлаждения.

[@Gandalf-inventor]

Согласен!

[@DimenstargFarben]

Там компрессии нет нифига

[@charliepearce8767]

I would have thought the bore would have been scored in the first few seconds of firing.. How cool is this !

[@KrustyKlown]

Didn't expect it to last that long!! Really cool, nice job.

[@JF32304]

Might want to let it cool down some between attempts. I'm not sure what your temp rating is with this material. I'm surprised the side walls aren't scratched up from the ring seating. Very very cool and nice job on the carving of the intake and exhaust ports! Well done on the whole build gents. 👍

[@customcutters]

what was the length of their cool down periods i didnt see it listed?

[@JF32304]

@@customcutters I have no idea but that's probably acrylic and can't take much heat, especially from internal combustion.

[@UdayKiran-mz6lo]

Bomb. N cc67

[@cxbra]

Shut your mouth and build your own engine. Thanks, Jay.

[@grokster9ontheroads174]

I suggested a quartz cylinder liner

[@nils2tr]

Ihr seid verrückt 😁👌

[@jedielder7970]

Wow, excellent work... and fascinating. 2-strokes are still my favorite all time motorcycles types. Thanks!

[@Алексрус-ь5ц]

А что в них такого любимого? Ресурс в 20% от аналогичного четырехтактного? Вы мазохист?

[@XaLi--GaLi]

@@Алексрус-ь5ц , этот запах выхлопа 2Т родом из детства! Поколению смартфонов не понять.

[@Алексрус-ь5ц]

@@XaLi--GaLi никакой разницы двигло оно и есть двигло, его работа колеса крутить и создавать как можно меньше проблем владельцу, остальное суета сует.

[@XaLi--GaLi]

@@Алексрус-ь5ц, всё ясно, я так и думал)) Мы, потомки верховых, а вы - добраться из пункта А в пункт Б с комфортом.

[@Алексрус-ь5ц]

@@XaLi--GaLi не, просто родители забыли вам масло при сборке в голову залить.... Столько лет на сухую.... Мда.

[@malcytull]

That is just incredible, you have worked hard & very accurately to get that bike running like that. Thank you for posting, it was very interesting.

[@ja-bv3lq]

That acrylic block/cylinder is BEAUTIFUL work - even before they installed it! ❤

[@ВладиславИконников-з8к]

Получилось очень хорошо, и наглядно, видно даже огонь в цилиндре

[@МашинистТепловоза1]

Такого ещё ни кто не делал ,👍☺️

[@alexeiihec8684]

Гараж 54

[@receptivocapitolioecia]

Parabens chylo racing vocês são demais primeira vez que vejo um motor funcionando assim !

[@peter7624]

Great job! All engines should be transparent!

[@ObamaoZedong]

I'd love to see this on a true high speed camera. Great concept.

[@lifeisgood3589]

The hard truth is the poly cylinder will lose compression little by little every time you crank it. The heat from the spark & combustion and the piston ring will bore that poly cylinder little by little to eventual not enough compression to crank without the drill or stay running. Super cool either way.

[@electech_5495]

How do you know it's poly?

[@electech_5495]

Your probably right toward the end you can tell it's foggy like plastic

[@armeddeafboi7276]

Must have polished that cylinder bore to perfection for such clarity

[@edbaudoux6584]

A transparent expansion chamber would be great to see!

[@gajos8284]

it would be very very hard to make

[@vicent436]

There is not exhaust. What for? Neither combustion.

[@edbaudoux6584]

@@vicent436 kzbin.info/www/bejne/fpPUhGacr514eqM

[@vicent436]

@@edbaudoux6584 You don't need exhaust chamber when you don't have combustion. Moreover, it would br impossible, or just nonsense to see it working only with leds.

[@429thunderjet2]

Yes it would be very hard to make a transparent expansion chamber, but would be very interesting to see the flow. A well designed pipe will add a lot of power to a two cycle.

[@oscarzt1652]

that bike looks lovely

[@Zahhar18]

Вот это подход! Просто фантастика!

[@Zahhar18]

Будущее наступило! Мастер гений!

[@LEGENDoha9876]

Great!!! Would love to see it in slow Motion!

[@vicent436]

Just adjust play speed to 0,25 !

[@malbers35]

Just pay attention to the video.

[@biermobiel]

WOW!!! Amazing work! Kept running way longer than I expected. Those ports 😍😍 The other see through parts 😍😍 And the lights are just iceing on the cake. Very nice!

[@thestickchannel1845]

6:42 wow the motor don't start at first attempt a very rare event 🤣💪

[@MURDOCK1500]

That ran a lot longer than I thought it would. Well done.

[@Kyre5049]

That’s fantastic now you know what there is to see when you hear a two-stroke!!!

[@kareemhill1318]

These men deserve there respect

[@mobilevideos4100]

Caraca MN parabéns sempre quis ver um motor funcionando assim tudo que eu já vi foi só aqueles vídeos feito em 3d no computador Obrigado por compartilhar sua genialidade

[@АлексейНик-ю4ш]

Я из России. В 1989 году у меня был мопед Riga-24 (Delta) с похожим двухтактным двигателем. А это Симсон из ГДР. В то время это была для нас несбыточная мечта. Лишь только счастливчики ими владели.

[@TheVictorUsFps]

@@АлексейНик-ю4ш incrível ver alguém dessa época tão incrível comentando!! Como era viver na Rússia sovietica ? Como foi depois da queda e como é hoje em dia ? Como era feito pra ter carros naquela época, como seus pais viviam? Eu adoro a Rússia, e os russos em si, seus costumes, e claro sua história, oq acham do Brasil?

[@willreis8863]

Top de mais né

[@TROdesigns]

Nice work on the cylinder 🤙🏼

[@rogueart7706]

I’ve always wanted to team up with a glass blower and make a glass engine. It can be bored with diamond cutters. This is really cool… kudos.

[@alexeyelkin3173]

Это искусство! Лучшее пособие для школы

[@kalipso7577]

Брат я с детства мечтал увидеть это спасибо тебе!!!

[@DirinMahardika]

Tuning the Samson engine with a transparent, cool and extraordinary engine body, so you can clearly see the compression and lubrication process on the engine 👍👍

[@paulkazjack]

No shit Sherlock.

[@AL1-53]

Thats a rocket scientist!

[@ИванКаргапольцев-ч9з]

Класс, отличное наглядное пособие для обучения механиков.

[@ПашкаПашкович-д3ч]

Как делать нельзя это пособие

[@De__zu]

Finally someone made it! Hats off guys

[@pablobaez9617]

por primera vez en mi vida pude ver como trabaja un motor por dentro sobre todo el piston y la distribucion del aceite muchisimas gracias felicitaciones exelente trabajo saludos desde aregentina

[@billymiligan5356]

Тебя легко удивить

[@kacperslubowski8633]

A może teraz przeźroczyste kartery ?🤔😂 uwielbiam twoje filmy 🥰

[@ajiejoe7848]

Great. ... Good for teaching aid in technical college. The true technology works

[@januszpolski4228]

Genialna robota. Szacun i pozdrowionka! Polska ma zdolnych ludzi!

[@jarek3031]

Szkoda że tłumika nie założyli. Chyba by się nie stopiło 😉

[@Carlos-bi4ew]

Impressionnant le travail, je suis bouche be waouh 😲😲😲😲

[@rickyroaster]

The constant kick starting reminded me of the Honda C70 I had as a kid, great fun

[@arneebbighausen5660]

Nice work 😍 Next a transparent exhaust 🤔 That would be nice with a 2 stroke

[@progaragechinskiemotorki]

Te czasy gdzie mamy przeźroczysty cylinder i głowicę nastały 😎

[@Colas640]

Ja bym głowicę na ich miejscu z na prawdę dobrze odpornego na temperaturę przezroczystego materiału zrobił głowicę, jak i cylinder, żeby można było normalnie tak jeździć, efekt na dzielni zarąbisty.

[@benjaminmateja4145]

M'y Dreams🤤🤤🤤 And You do it! Waouhhhhh. Merci de France My grand father ans grand mother from to poland! 🤟🙏🙏🙏

[@slavon2377]

В этот раз рекомендации сработали на отлично

[@BraapEffex]

Coolest thing I have ever seen! Thx for the awesome video! Cheers 🥂

[@isabellanascimento6642]

Olha a combustão da gasolina muito show 😍🙌

[@ИбрагимЗанкишиев]

Это было очень круто🔥

[@garage11tv]

Здравствуйте рад вас видеть в команде подписчиков моего канала заранее спасибо

[@kubapolska1237]

następny odcinek przeźroczysty cylinder i glowica

[@colinevans7134]

Didn't see any tuning going on, what a video and we'll done

[@SuperYellowsubmarin]

Yeah !!! Loved seeing through the gearbox, too !

[@sdezy_]

This is brilliant work! 👍👍👍

[@adamok1154]

Niezłe zasięgi, tak trzymać !

[@BigEightiesNewWave]

Hello Poland !

[@arsyadmotorchanel]

It's really amazing, but can it last long?

[@milebakajic7202]

ARSYAD You mising point. Maestro showed that bike can work even this way.Nobody did that before him.Perfect work,bravo!

[@lifeisgood3589]

Absolutely not. Would not leave the driveway lol.

[@Rayhanmotor]

Ini hal yang menakjubkan, Kreatif, motifasi untuk saya, Salam sukses dari Indonesia 🇲🇨🇲🇨

[@east8891]

Watching that in action was fascinating. Great job!

[@giancarlofoglia8145]

Hi guys fantastic job or idea 💡 , Just One question: where is The exaust port ? Or wy do not create ? Thank you

[@timm.8408]

There was an exhaust Port 🤔

[@zelazny_moto]

tego się nie spodziewałem

[@Seba-ob8oy]

I to się nazywa zajawka 😁

[@triplefret]

A thing of rare beauty. Well done.

[@srkworldwarlock9946]

Amazing very good 👍

[@klewerson]

muito massa ver o funcionamento do motor sem ser em maquetes, uma pena que o cilindro em vidro ou outro material que não seja metal não seja viável a longo prazo.

[@smithnelly5367]

Trade with an expert else you will lose all your capital and you will drop off the market The importance of professional mentorship of an expert should be the first step of trading.

[@chukwuka1696]

@Jamie Fredrick Wow I'm just shock someone mentioned expert Mr Fernando i thought I'm the only one trading with him

[@onuemmanuel7423]

@@chukwuka1696 He help me recover what i lost trying to trade for myself

[@yahayaglory3468]

@@onuemmanuel7423 I think I'm blessed because if not I wouldn't have met someone who is as spectacular as expert Mr Fernando C. Arevalo Fx

[@debbiphilip7834]

@@yahayaglory3468 Am so grateful my heart knowing how hard I've struggled to become debt free, I never wanted to do this but I'll be guilty if I don't share this good news with you guys, Sir Fernando is the best trader ever. And he is well experienced and trustworthy, thanks for helping me and my family, we are forever grateful

[@maxwilliams3994]

@@debbiphilip7834 Mr Fernando is the best way to go as long as you are talking about binary options and cryptotrading. He's experienced and skilled He's truthful, genuine and reputable He's honest, kind and trustworthy Have invested four times and it came out all successful He is for sure

[@romildomontes7826]

Parabéns pela dedicação 👏

[@88888rb]

Ай молодца !!! ))) Я даже сыну показал .. Очень наглядно .. И работа проделана немалая .. Сделано всё очень красиво ..!!! Уважаю !!!!

[@MobilJJN1080]

Mantap sekali mesinnya kawan semangat terus hadir nyimak teman sukses terus ya

[@97062402]

Muito bom! Aproveita o trabalho das janelas de passagem já prontos, e coloca uma camisa de vidro!

[@iarleylac9084]

Acrílico

[@briant2871]

Can You Put The Transparent Head on it??

[@КириллВоронов-ф8ы]

Пластиковый цилиндр быстро потерял компрессию на стенках из-за быстрого механического стирания поверхности поршнем

[@cosmodesant]

интересно, если из эпоксидки вылить?

[@roshansikkim9258]

Hats off to you guys for posting this video👍

[@woodavid6792]

그림으로만 보던 엔진 실린더 구조를 직접 보니 이해가 잘 됩니다.

[@kennethhacker1341]

I have seen it all lol... freaking incredible buddy!!!!

[@DanielErnst1991]

geil auf jedenfall und endlich hat man auch mal schönes Anschauungsmaterial bekommen wie es in funktionierend aussieht

[@davidhansen4471]

you sir get 10 stars for that one great job

[@cabbage681]

Very educational. Nice to be able to see what we were all sure was happening. Petrol heads version of the Great Hadron Collider👍

[@MotoEnz]

1:50 we always have that one friend 🤣

[@ireneofdez3869]

You are insane man!! This is so f amazing, congratulations

[@stephenfrancisvoros382]

Great display of a 2 stroke running, you'll find that to complete the 2 stroke system the exhaust needs be connected, it's a lot to go into, but there are things happening within a 2 stroke that depends on exhaust system.

[@eatcommies1375]

Not only COOL, But SIMSON ENDURO was my childhood most wanted bike!:) (the silver one)

[@hatta1991]

Filmed with a ultra highspeed cam would be nice, to see the how the fresh air-gas mixture flushes out the old burned gas :)

[@cheesecake9336]

The piston moves so fast you can even see it !😊